2011-06-11 Joel Sherrill <joel.sherrill@oarcorp.com>

	* Makefile.am, configure.ac: runtest for this BSP obsoleted by
	rtems-testing/sim-scripts support. Please use those scripts.
	* tools/.cvsignore, tools/ChangeLog, tools/Makefile.am,
	tools/configure.ac, tools/psim-bottom, tools/psim-gdb-bottom,
	tools/psim-gdb-top.in, tools/psim-shared, tools/psim-top.in,
	tools/runtest-bottom, tools/runtest-top.in: Removed.

1 files changed, 0 insertions, 180 deletions

diff --git a/c/src/lib/libbsp/powerpc/psim/tools/psim-shared b/c/src/lib/libbsp/powerpc/psim/tools/psim-shared
deleted file mode 100755
index 25addb7a5b..0000000000
--- a/c/src/lib/libbsp/powerpc/psim/tools/psim-shared
+++ /dev/null
@@ -1,180 +0,0 @@
-
-TREE_FILE=psim_tree.${LOGNAME}
-
-case $0 in
-  *4.8*)  rtemsTarget=powerpc-rtems4.8 ;;
-  *4.9*)  rtemsTarget=powerpc-rtems4.9 ;;
-  *4.10*) rtemsTarget=powerpc-rtems4.10 ;;
-  *) ;;
-esac
-
-### Generate the PSIM device tree based upon the type of application being run
-gen_device_tree()
-{
-  enable_sysv_ipc="yes"
-
-  if [ ${use_sysv_ipc} = "yes" ] ; then
-    enable_sysv_ipc="yes"
-    value=-1               # for now assume we are slave in this mode
-  else
-    case ${1} in 
-      *node*)
-        enable_sysv_devices="yes"
-        case ${1} in
-          *node1*) value=1 ;;
-          *)       value=-1 ;;
-        esac
-        ;;
-      *)
-        enable_sysv_devices="no"
-        ;;
-    esac
-  fi
-
-  if [ ${enable_sysv_devices} = "yes" ] ; then
-    if [ X${RTEMS_SHM_SEMAPHORE_KEY} = X -o X${RTEMS_SHM_KEY} = X ] ; then
-      fatal  RTEMS_SHM_SEMAPHORE_KEY and/or RTEMS_SHM_KEY not set
-    fi
-  fi
-
-  if [ X${RAM_SIZE} = X ] ; then
-    if [ X${NM} = X ] ; then
-      NM=${rtemsTarget}-nm
-    fi
-    RAM_SIZE=`$NM ${1} | awk '/\<RamSize\>/{print "0x"$1}'`
-  fi
-
-  cat <<EOF
-#
-#  Device Tree for PSIM
-#
-#  Automatically Generated -- DO NOT EDIT!!
-#
-/#address-cells 1
-/openprom/init/register/pvr 0xfffe0000
-# This must be >= than linkcmds defined RamSize!
-/openprom/options/oea-memory-size $RAM_SIZE
-##### EEPROM @ 0x0c000000 for 512K
-/eeprom@0x0c000000/reg 0x0c000000 0x80000
-/eeprom@0x0c000000/nr-sectors 8
-/eeprom@0x0c000000/sector-size 0x10000
-/eeprom@0x0c000000/byte-write-delay 1000
-/eeprom@0x0c000000/sector-start-delay 100
-/eeprom@0x0c000000/erase-delay 1000
-/eeprom@0x0c000000/manufacture-code 0x01
-/eeprom@0x0c000000/device-code 0xa4
-
-##### NVRAM/RTC NVRAM Portion is 0x0c080000 for 512K
-##### NVRAM/RTC RTC   Portion is 0x0c100000 for 12
-/nvram@0x0c080000/reg 0x0c080000 524300
-/nvram@0x0c080000/timezone -3600
-
-##### OPENPIC @ 0x0c130000 - 0x0c170000 (512K)
-/opic@0x0c130000/reg              0x0c130000 0 0x0c130000 0x40000
-/opic@0x0c130000/interrupt-ranges 0 0 0 16
-/opic@0x0c130000/device_type      open-pic
-# interupt out -> CPU's interrupt pin
-/opic@0x0c130000 > intr0 int /cpus/cpu@0
-EOF
-
-  if [ X${enable_if_sim} = Xyes ] ; then
-    cat <<EOF
-
-#### ETHTAP @ 0x0c100020 for 0x40
-#
-# NOTE 'ethtap' currently (200902) requires psim to
-#      be patched -- also, it is only supported on
-#      a linux host.
-#      the 'ethtap' device transfers data from/to the
-#      simulated network interface to/from a 'ethertap'
-#      interface on the linux host (consult tun/tap
-#      device documentation).
-#      A very useful tool is 'tunctl' which allows for
-#      configuring user-accessible, persistent 'tap'
-#      devices so that psim may be executed w/o special
-#      (root) privileges.
-
-/ethtap@0x0c100020/reg           0x0c100020 0x40
-# route interrupt to open-pic
-/ethtap@0x0c100020               > 0 irq0 /opic@0x0c130000
-# 'tun' device on host
-/ethtap@0x0c100020/tun-device    "/dev/net/tun"
-# name of 'tap' device to use
-/ethtap@0x0c100020/tap-ifname    "tap0"
-# ethernet address of simulated IF
-/ethtap@0x0c100020/hw-address    "00:00:00:22:11:00"
-# generate CRC and append to received packet before
-# handing over to the simulation. This is mostly for
-# debugging the rtems device driver. If unsure, leave 'false'.
-/ethtap@0x0c100020/enable-crc    false
-EOF
-  fi
-
-  if [ ${enable_sysv_devices} = yes ] ; then
-    echo "##### System V IPC (Semaphore) 0x0c100010 for 12"
-    echo "/sem@0x0c100010/reg 0x0c100010 12"
-    echo "/sem@0x0c100010/key ${RTEMS_SHM_SEMAPHORE_KEY}"
-    echo "/sem@0x0c100010/value ${value}"
-    echo
-    echo "##### System V IPC (Shared Memory) 0x0c110000 for 128K"
-    echo "/shm@0x0c110000/reg 0x0c110000 0x20000"
-    echo "/shm@0x0c110000/key ${RTEMS_SHM_KEY}"
-  fi
-}
-
-### run the specified test with the time limit
-runone()
-{
-  testname=${1}
-  max_run_time=${2}
-  if [ $# -eq 3 ] ; then
-    treefile=${3}
-  else
-    treefile=${TREE_FILE}
-  fi
-  if [ ${max_run_time} -eq 0 ] ; then
-    #echo run ${testname} forever
-    ${RUN} -f ${treefile} ${RUN_DEBUG} ${testname}
-  else
-    log=`echo ${testname} | sed -e 's/.exe$/.log/' -e 's/.ralf$/.log/'`
-    #echo run ${testname} for maximum ${max_run_time} seconds
-    ${RUN} -f ${treefile} ${RUN_DEBUG} ${testname} >${log} 2>&1 &
-    pid=$!
-
-    # Make sure it won't run forever...
-    time_run=0
-    while [ $time_run -lt $max_run_time ]
-    do
-      # sleep 1s at a time waiting for job to finish or timer to expire
-      # if job has exited, then we exit, too.
-      sleep 1
-      kill -0 $pid 2> /dev/null
-      running=$?
-      if [ $running -eq 0 ] ; then
-        time_run=$((time_run + 5))
-        if [ $time_run -ge $max_run_time ]; then
-	  kill -9 $pid 2> /dev/null
-	  ran_too_long="yes"
-          echo "${testname} killed after running ${max_run_time} seconds"
-        fi
-        grep "Suspending faulting task" ${log} >/dev/null 2>&1
-        Fault=$?
-        grep "assertion failed" ${log} >/dev/null 2>&1
-        Assert=$?
-        if [ $Fault -eq 0 -o $Assert -eq 0 ] ; then
-	  kill -9 $pid 2> /dev/null
-          echo "${testname} failed after ${max_run_time} seconds"
-          ran_too_long="no"
-          break
-        fi
-      else
-        ran_too_long="no"
-        break
-      fi
-    done
-    cat ${log}
-    rm -f ${log}
-  fi
-
-}
-