new files

3 files changed, 332 insertions, 0 deletions

diff --git a/c/src/lib/libbsp/powerpc/psim/include/Makefile.in b/c/src/lib/libbsp/powerpc/psim/include/Makefile.in
new file mode 100644
index 0000000000..93ed75d4a2
--- /dev/null
+++ b/c/src/lib/libbsp/powerpc/psim/include/Makefile.in
@@ -0,0 +1,35 @@
+#
+#  $Id$
+#
+
+@SET_MAKE@
+srcdir = @srcdir@
+VPATH = @srcdir@
+RTEMS_ROOT = @top_srcdir@
+PROJECT_ROOT = @PROJECT_ROOT@
+
+H_FILES = $(srcdir)/bsp.h $(srcdir)/coverhd.h
+
+#
+#  Equate files are for including from assembly preprocessed by
+#  gm4 or gasp.  No examples are provided except for those for
+#  other CPUs.  The best way to generate them would be to
+#  provide a program which generates the constants used based
+#  on the C equivalents.
+#
+#  If you add equate files, don't forget to uncomment the install line
+#  below.
+#
+
+EQ_FILES =
+
+SRCS=$(H_FILES) $(EQ_FILES)
+
+include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg
+include $(RTEMS_ROOT)/make/leaf.cfg
+
+CLEAN_ADDITIONS +=
+CLOBBER_ADDITIONS +=
+
+all:	$(SRCS)
+	$(INSTALL) -m 444 $(H_FILES) $(PROJECT_INCLUDE)
diff --git a/c/src/lib/libbsp/powerpc/psim/include/bsp.h b/c/src/lib/libbsp/powerpc/psim/include/bsp.h
new file mode 100644
index 0000000000..f600579b00
--- /dev/null
+++ b/c/src/lib/libbsp/powerpc/psim/include/bsp.h
@@ -0,0 +1,162 @@
+/*  bsp.h
+ *
+ *  This include file contains all Papyrus board IO definitions.
+ *
+ *  Author:	Andrew Bray <andy@i-cubed.co.uk>
+ *
+ *  COPYRIGHT (c) 1995 by i-cubed ltd.
+ *
+ *  To anyone who acknowledges that this file is provided "AS IS"
+ *  without any express or implied warranty:
+ *      permission to use, copy, modify, and distribute this file
+ *      for any purpose is hereby granted without fee, provided that
+ *      the above copyright notice and this notice appears in all
+ *      copies, and that the name of i-cubed limited not be used in
+ *      advertising or publicity pertaining to distribution of the
+ *      software without specific, written prior permission.
+ *      i-cubed limited makes no representations about the suitability
+ *      of this software for any purpose.
+ *
+ *  Derived from c/src/lib/libbsp/no_cpu/no_bsp/include/bsp.h
+ *
+ *  COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994.
+ *  On-Line Applications Research Corporation (OAR).
+ *  All rights assigned to U.S. Government, 1994.
+ *
+ *  This material may be reproduced by or for the U.S. Government pursuant
+ *  to the copyright license under the clause at DFARS 252.227-7013.  This
+ *  notice must appear in all copies of this file and its derivatives.
+ *
+ *  $Id$
+ */
+
+#ifndef __PAPYRUS_h
+#define __PAPYRUS_h
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#ifdef ASM
+/* Definition of where to store registers in alignment handler */
+#define ALIGN_REGS 0x0140
+
+#else
+#include <rtems.h>
+#include <console.h>
+#include <clockdrv.h>
+#include <console.h>
+#include <iosupp.h>
+
+/*
+ *  Define the time limits for RTEMS Test Suite test durations.
+ *  Long test and short test duration limits are provided.  These
+ *  values are in seconds and need to be converted to ticks for the
+ *  application.
+ *
+ */
+
+#define MAX_LONG_TEST_DURATION       300 /* 5 minutes = 300 seconds */
+#define MAX_SHORT_TEST_DURATION      3   /* 3 seconds */
+
+
+/*
+ *  Stuff for Time Test 27
+ */
+
+#define MUST_WAIT_FOR_INTERRUPT 1
+
+#define Install_tm27_vector( _handler ) \
+  set_vector( (_handler), PPC_IRQ_DECREMENTER, 1 )
+
+#define Cause_tm27_intr()  \
+  do { \
+    unsigned32 _clicks = 1; \
+    asm volatile( "mtdec %0" : "=r" ((_clicks)) : "r" ((_clicks)) ); \
+  } while (0)
+
+
+#define Clear_tm27_intr() \
+  do { \
+    unsigned32 _clicks = 0xffffffff; \
+    asm volatile( "mtdec %0" : "=r" ((_clicks)) : "r" ((_clicks)) ); \
+  } while (0)
+
+#define Lower_tm27_intr() \
+  do { \
+    unsigned32 _msr = 0; \
+    _ISR_Set_level( 0 ); \
+    asm volatile( "mfmsr %0 ;" : "=r" (_msr) : "r" (_msr) ); \
+    _msr |=  0x8002; \
+    asm volatile( "mtmsr %0 ;" : "=r" (_msr) : "r" (_msr) ); \
+  } while (0)
+
+/* Constants */
+
+/*
+ *  Device Driver Table Entries
+ */
+ 
+/*
+ * NOTE: Use the standard Console driver entry
+ */
+ 
+/*
+ * NOTE: Use the standard Clock driver entry
+ */
+ 
+
+/*
+ *  Information placed in the linkcmds file.
+ */
+
+extern int   RAM_START;
+extern int   RAM_END;
+extern int   RAM_SIZE;
+
+extern int   PROM_START;
+extern int   PROM_END;
+extern int   PROM_SIZE;
+
+extern int   CLOCK_SPEED;
+
+extern int   end;        /* last address in the program */
+
+/*
+ * How many libio files we want
+ */
+ 
+#define BSP_LIBIO_MAX_FDS       20
+
+/* functions */
+
+void bsp_start( void );
+
+void bsp_cleanup( void );
+
+rtems_isr_entry set_vector(                    /* returns old vector */
+  rtems_isr_entry     handler,                  /* isr routine        */
+  rtems_vector_number vector,                   /* vector number      */
+  int                 type                      /* RTEMS or RAW intr  */
+);
+
+void DEBUG_puts( char *string );
+
+void BSP_fatal_return( void );
+
+void bsp_spurious_initialize( void );
+
+extern rtems_configuration_table BSP_Configuration;     /* owned by BSP */
+
+extern rtems_cpu_table           Cpu_table;             /* owned by BSP */
+
+extern rtems_unsigned32          bsp_isr_level;
+
+#endif /* ASM */
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+/* end of include file */
diff --git a/c/src/lib/libbsp/powerpc/psim/include/coverhd.h b/c/src/lib/libbsp/powerpc/psim/include/coverhd.h
new file mode 100644
index 0000000000..4a2fe8b24b
--- /dev/null
+++ b/c/src/lib/libbsp/powerpc/psim/include/coverhd.h
@@ -0,0 +1,135 @@
+/*  coverhd.h
+ *
+ *  This include file has defines to represent the overhead associated
+ *  with calling a particular directive from C.  These are used in the
+ *  Timing Test Suite to ignore the overhead required to pass arguments
+ *  to directives.  On some CPUs and/or target boards, this overhead
+ *  is significant and makes it difficult to distinguish internal
+ *  RTEMS execution time from that used to call the directive.
+ *  This file should be updated after running the C overhead timing
+ *  test.  Once this update has been performed, the RTEMS Time Test
+ *  Suite should be rebuilt to account for these overhead times in the
+ *  timing results.
+ *
+ *  NOTE:  If these are all zero, then the times reported include
+ *         all calling overhead including passing of arguments.
+ *
+ *  COPYRIGHT (c) 1989, 1990, 1991, 1992, 1993, 1994.
+ *  On-Line Applications Research Corporation (OAR).
+ *  All rights assigned to U.S. Government, 1994.
+ *
+ *  This material may be reproduced by or for the U.S. Government pursuant
+ *  to the copyright license under the clause at DFARS 252.227-7013.  This
+ *  notice must appear in all copies of this file and its derivatives.
+ *
+ *  $Id$
+ */
+
+/*
+ *  Updated for a 25MHz Papyrus by Andrew Bray <andy@i-cubed.co.uk>
+ *
+ *  Units are 100ns.
+ *
+ *  These numbers are of questionable use, as they are developed by calling
+ *  the routine many times, thus getting its entry veneer into the (small)
+ *  cache on the 403GA.  This in general is not true of the RTEMS timing
+ *  tests, which usually call a routine only once, thus having no cache loaded
+ *  advantage.
+ *
+ *  Whether the directive times are useful after deducting the function call
+ *  overhead is also questionable.  The user is more interested generally
+ *  in the total cost of a directive, not the cost if the procedure call
+ *  is inlined!  (In general this is not true).
+ *
+ *  Andrew Bray 18/08/1995
+ *
+ */
+
+#ifndef __COVERHD_h
+#define __COVERHD_h
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#define CALLING_OVERHEAD_INITIALIZE_EXECUTIVE      1
+#define CALLING_OVERHEAD_SHUTDOWN_EXECUTIVE        1
+#define CALLING_OVERHEAD_TASK_CREATE               3
+#define CALLING_OVERHEAD_TASK_IDENT                1
+#define CALLING_OVERHEAD_TASK_START                1
+#define CALLING_OVERHEAD_TASK_RESTART              1
+#define CALLING_OVERHEAD_TASK_DELETE               1
+#define CALLING_OVERHEAD_TASK_SUSPEND              1
+#define CALLING_OVERHEAD_TASK_RESUME               1
+#define CALLING_OVERHEAD_TASK_SET_PRIORITY         1
+#define CALLING_OVERHEAD_TASK_MODE                 1
+#define CALLING_OVERHEAD_TASK_GET_NOTE             1
+#define CALLING_OVERHEAD_TASK_SET_NOTE             1
+#define CALLING_OVERHEAD_TASK_WAKE_WHEN            4
+#define CALLING_OVERHEAD_TASK_WAKE_AFTER           1
+#define CALLING_OVERHEAD_INTERRUPT_CATCH           1
+#define CALLING_OVERHEAD_CLOCK_GET                 4
+#define CALLING_OVERHEAD_CLOCK_SET                 3
+#define CALLING_OVERHEAD_CLOCK_TICK                1
+
+#define CALLING_OVERHEAD_TIMER_CREATE              1
+#define CALLING_OVERHEAD_TIMER_IDENT               1
+#define CALLING_OVERHEAD_TIMER_DELETE              1
+#define CALLING_OVERHEAD_TIMER_FIRE_AFTER          2
+#define CALLING_OVERHEAD_TIMER_FIRE_WHEN           5
+#define CALLING_OVERHEAD_TIMER_RESET               1
+#define CALLING_OVERHEAD_TIMER_CANCEL              1
+#define CALLING_OVERHEAD_SEMAPHORE_CREATE          2
+#define CALLING_OVERHEAD_SEMAPHORE_IDENT           1
+#define CALLING_OVERHEAD_SEMAPHORE_DELETE          1
+#define CALLING_OVERHEAD_SEMAPHORE_OBTAIN          1
+#define CALLING_OVERHEAD_SEMAPHORE_RELEASE         1
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_CREATE      2
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_IDENT       1
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_DELETE      1
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_SEND        1
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_URGENT      1
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_BROADCAST   1
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_RECEIVE     2
+#define CALLING_OVERHEAD_MESSAGE_QUEUE_FLUSH       1
+
+#define CALLING_OVERHEAD_EVENT_SEND                1
+#define CALLING_OVERHEAD_EVENT_RECEIVE             2
+#define CALLING_OVERHEAD_SIGNAL_CATCH              1
+#define CALLING_OVERHEAD_SIGNAL_SEND               1
+#define CALLING_OVERHEAD_PARTITION_CREATE          3
+#define CALLING_OVERHEAD_PARTITION_IDENT           1
+#define CALLING_OVERHEAD_PARTITION_DELETE          1
+#define CALLING_OVERHEAD_PARTITION_GET_BUFFER      1
+#define CALLING_OVERHEAD_PARTITION_RETURN_BUFFER   1
+#define CALLING_OVERHEAD_REGION_CREATE             3
+#define CALLING_OVERHEAD_REGION_IDENT              1
+#define CALLING_OVERHEAD_REGION_DELETE             1
+#define CALLING_OVERHEAD_REGION_GET_SEGMENT        2
+#define CALLING_OVERHEAD_REGION_RETURN_SEGMENT     1
+#define CALLING_OVERHEAD_PORT_CREATE               2
+#define CALLING_OVERHEAD_PORT_IDENT                1
+#define CALLING_OVERHEAD_PORT_DELETE               1
+#define CALLING_OVERHEAD_PORT_EXTERNAL_TO_INTERNAL 1
+#define CALLING_OVERHEAD_PORT_INTERNAL_TO_EXTERNAL 2
+
+#define CALLING_OVERHEAD_IO_INITIALIZE             2
+#define CALLING_OVERHEAD_IO_OPEN                   2
+#define CALLING_OVERHEAD_IO_CLOSE                  2
+#define CALLING_OVERHEAD_IO_READ                   2
+#define CALLING_OVERHEAD_IO_WRITE                  2
+#define CALLING_OVERHEAD_IO_CONTROL                2
+#define CALLING_OVERHEAD_FATAL_ERROR_OCCURRED      1
+#define CALLING_OVERHEAD_RATE_MONOTONIC_CREATE     1
+#define CALLING_OVERHEAD_RATE_MONOTONIC_IDENT      1
+#define CALLING_OVERHEAD_RATE_MONOTONIC_DELETE     1
+#define CALLING_OVERHEAD_RATE_MONOTONIC_CANCEL     1
+#define CALLING_OVERHEAD_RATE_MONOTONIC_PERIOD     1
+#define CALLING_OVERHEAD_MULTIPROCESSING_ANNOUNCE  1
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif
+/* end of include file */