Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step.  It
copied header files from arbitrary locations into the build tree.  The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

* The make preinstall step itself needs time and disk space.

* Errors in header files show up in the build tree copy.  This makes it
  hard for editors to open the right file to fix the error.

* There is no clear relationship between source and build tree header
  files.  This makes an audit of the build process difficult.

* The visibility of all header files in the build tree makes it
  difficult to enforce API barriers.  For example it is discouraged to
  use BSP-specifics in the cpukit.

* An introduction of a new build system is difficult.

* Include paths specified by the -B option are system headers.  This
  may suppress warnings.

* The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step.   All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc.  Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

* cpukit/include

* cpukit/score/cpu/@RTEMS_CPU@/include

* cpukit/libnetworking

The new BSP include directories are:

* bsps/include

* bsps/@RTEMS_CPU@/include

* bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed.  The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

7 files changed, 7 insertions, 420 deletions

diff --git a/c/src/lib/libbsp/powerpc/mpc8260ads/Makefile.am b/c/src/lib/libbsp/powerpc/mpc8260ads/Makefile.am
index 5436770e52..bd84c6c0cc 100644
--- a/c/src/lib/libbsp/powerpc/mpc8260ads/Makefile.am
+++ b/c/src/lib/libbsp/powerpc/mpc8260ads/Makefile.am
@@ -4,27 +4,19 @@ EXTRA_DIST =
 include $(top_srcdir)/../../../../automake/compile.am
 include $(top_srcdir)/../../bsp.am
 
-include_bspdir = $(includedir)/bsp
+dist_project_lib_DATA = startup/bsp_specs
 
-dist_project_lib_DATA = bsp_specs
-
-include_HEADERS = include/bsp.h
-include_HEADERS += include/tm27.h
-
-nodist_include_HEADERS = include/bspopts.h
-nodist_include_bsp_HEADERS = ../../shared/include/bootcard.h
 DISTCLEANFILES = include/bspopts.h
 
 noinst_PROGRAMS =
 
-
-dist_project_lib_DATA += startup/linkcmds
-
 EXTRA_DIST += start/start.S
 start.$(OBJEXT): start/start.S
 	$(CPPASCOMPILE) -o $@ -c $<
 project_lib_DATA = start.$(OBJEXT)
 
+project_lib_DATA += linkcmds
+
 EXTRA_DIST += ../../powerpc/shared/start/rtems_crti.S
 rtems_crti.$(OBJEXT): ../../powerpc/shared/start/rtems_crti.S
 	$(CPPASCOMPILE) -o $@ -c $<
@@ -39,10 +31,6 @@ libbsp_a_SOURCES += ../shared/clock/clock.c
 # console
 libbsp_a_SOURCES += console/console.c
 
-include_bsp_HEADERS = irq/irq.h \
-	../../shared/include/irq-generic.h \
-	../../shared/include/irq-info.h
-
 # irq
 libbsp_a_SOURCES += ../../shared/src/irq-default-handler.c
 libbsp_a_SOURCES += ../../shared/src/irq-generic.c
@@ -84,5 +72,5 @@ endif
 
 EXTRA_DIST += times
 
-include $(srcdir)/preinstall.am
 include $(top_srcdir)/../../../../automake/local.am
+include $(srcdir)/../../../../../../bsps/powerpc/mpc8260ads/headers.am
diff --git a/c/src/lib/libbsp/powerpc/mpc8260ads/configure.ac b/c/src/lib/libbsp/powerpc/mpc8260ads/configure.ac
index b1f1c27631..96a4af7697 100644
--- a/c/src/lib/libbsp/powerpc/mpc8260ads/configure.ac
+++ b/c/src/lib/libbsp/powerpc/mpc8260ads/configure.ac
@@ -4,6 +4,9 @@ AC_PREREQ([2.69])
 AC_INIT([rtems-c-src-lib-libbsp-powerpc-mpc8260ads],[_RTEMS_VERSION],[https://devel.rtems.org/newticket])
 AC_CONFIG_SRCDIR([make/custom/mpc8260ads.cfg])
 RTEMS_TOP(../../../../../..)
+RTEMS_SOURCE_TOP
+RTEMS_BUILD_TOP
+RTEMS_BSP_LINKCMDS
 
 RTEMS_CANONICAL_TARGET_CPU
 AM_INIT_AUTOMAKE([no-define nostdinc foreign 1.12.2])
diff --git a/c/src/lib/libbsp/powerpc/mpc8260ads/include/bsp.h b/c/src/lib/libbsp/powerpc/mpc8260ads/include/bsp.h
deleted file mode 100644
index c207a2ec99..0000000000
--- a/c/src/lib/libbsp/powerpc/mpc8260ads/include/bsp.h
+++ /dev/null
@@ -1,86 +0,0 @@
-/*
- *  This include file contains all board IO definitions.
- */
-
-/*
- *  COPYRIGHT (c) 1989-2014.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef LIBBSP_POWERPC_MPC8260ADS_BSP_H
-#define LIBBSP_POWERPC_MPC8260ADS_BSP_H
-
-#include <bspopts.h>
-#include <bsp/default-initial-extension.h>
-
-#include <rtems.h>
-#include <mpc8260.h>
-#include <mpc8260/cpm.h>
-#include <mpc8260/mmu.h>
-#include <mpc8260/console.h>
-#include <bsp/irq.h>
-#include <bsp/vectors.h>
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
- * Board configuration registers
- */
-
-typedef struct bcsr
-
-{
-    uint32_t          bcsr0; /* Board Control and Status Register */
-    uint32_t          bcsr1;
-    uint32_t          bcsr2;
-    uint32_t          bcsr3;
-
-} BCSR;
-
-/*
- * Network driver configuration
- */
-struct rtems_bsdnet_ifconfig;
-extern int rtems_enet_driver_attach (struct rtems_bsdnet_ifconfig *config, int attaching);
-#define RTEMS_BSP_NETWORK_DRIVER_NAME	"eth1"
-#define RTEMS_BSP_NETWORK_DRIVER_ATTACH	rtems_enet_driver_attach
-
-/* miscellaneous stuff assumed to exist */
-
-/*
- * We need to decide how much memory will be non-cacheable. This
- * will mainly be memory that will be used in DMA (network and serial
- * buffers).
- */
-/*
-#define NOCACHE_MEM_SIZE 512*1024
-*/
-
-/* functions */
-
-#if 0
-void M8260ExecuteRISC( uint32_t         command );
-void *M8260AllocateBufferDescriptors( int count );
-void *M8260AllocateRiscTimers( int count );
-extern char M8260DefaultWatchdogFeeder;
-#endif
-
-/*
- * Prototypes for items shared across file boundaries in the BSP
- */
-extern uint32_t bsp_serial_per_sec;
-void *bsp_idle_thread( uintptr_t ignored );
-void  cpu_init(void);
-int mbx8xx_console_get_configuration(void);
-
-#ifdef __cplusplus
-}
-#endif
-
-#endif
diff --git a/c/src/lib/libbsp/powerpc/mpc8260ads/include/tm27.h b/c/src/lib/libbsp/powerpc/mpc8260ads/include/tm27.h
deleted file mode 100644
index b1eafc47aa..0000000000
--- a/c/src/lib/libbsp/powerpc/mpc8260ads/include/tm27.h
+++ /dev/null
@@ -1,46 +0,0 @@
-/*
- * @file
- * @ingroup powerpc_mpc8260ads
- * @brief Implementations for interrupt mechanisms for Time Test 27
- */
-
-/*
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef _RTEMS_TMTEST27
-#error "This is an RTEMS internal file you must not include directly."
-#endif
-
-#ifndef __tm27_h
-#define __tm27_h
-
-#include <rtems/powerpc/powerpc.h>
-
-/*
- *  Stuff for Time Test 27
- */
-
-#define MUST_WAIT_FOR_INTERRUPT 0
-
-#define Install_tm27_vector( handler ) \
-   do { \
-	static rtems_irq_connect_data scIrqData = { \
-	  PPC_IRQ_SCALL, \
-	  (rtems_irq_hdl) handler, \
-	  NULL, \
-	  NULL, \
-	  NULL  \
-	}; \
-	BSP_install_rtems_irq_handler (&scIrqData); \
-   } while(0)
-
-#define Cause_tm27_intr() __asm__ volatile ("sc")
-
-#define Clear_tm27_intr() /* empty */
-
-#define Lower_tm27_intr() /* empty */
-
-#endif
diff --git a/c/src/lib/libbsp/powerpc/mpc8260ads/irq/irq.h b/c/src/lib/libbsp/powerpc/mpc8260ads/irq/irq.h
deleted file mode 100644
index 1dd18611fc..0000000000
--- a/c/src/lib/libbsp/powerpc/mpc8260ads/irq/irq.h
+++ /dev/null
@@ -1,193 +0,0 @@
-/* irq.h
- *
- *  This include file describe the data structure and the functions implemented
- *  by rtems to write interrupt handlers.
- *
- *  CopyRight (C) 1999 valette@crf.canon.fr
- *
- *  This code is heavilly inspired by the public specification of STREAM V2
- *  that can be found at :
- *
- *      <http://www.chorus.com/Documentation/index.html> by following
- *  the STREAM API Specification Document link.
- *
- *  Modified for mpc8260 by Andy Dachs <a.dachs@sstl.co.uk>
- *  Surrey Satellite Technology Limited
- *    The interrupt handling on the mpc8260 seems quite different from
- *    the 860 (I don't know the 860 well).  Although some interrupts
- *    are routed via the CPM irq and some are direct to the SIU they all
- *    appear logically the same.  Therefore I removed the distinction
- *    between SIU and CPM interrupts.
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.org/license/LICENSE.
- */
-
-#ifndef LIBBSP_POWERPC_IRQ_H
-#define LIBBSP_POWERPC_IRQ_H
-#include <rtems/irq.h>
-
-#ifndef ASM
-
-#ifdef __cplusplus
-extern "C" {
-#endif
-
-/*
-extern volatile unsigned int ppc_cached_irq_mask;
-*/
-
-/*
- * Symblolic IRQ names and related definitions.
- */
-
-  /*
-   * CPM IRQ handlers related definitions
-   * CAUTION : BSP_CPM_IRQ_LOWEST_OFFSET should be equal to OPENPIC_VEC_SOURCE
-   */
-#define BSP_CPM_IRQ_NUMBER		(64)
-#define BSP_CPM_IRQ_LOWEST_OFFSET	(0)
-#define BSP_CPM_IRQ_MAX_OFFSET		(BSP_CPM_IRQ_LOWEST_OFFSET + BSP_CPM_IRQ_NUMBER - 1)
-  /*
-   * PowerPc exceptions handled as interrupt where a rtems managed interrupt
-   * handler might be connected
-   */
-#define BSP_PROCESSOR_IRQ_NUMBER	(1)
-#define BSP_PROCESSOR_IRQ_LOWEST_OFFSET (BSP_CPM_IRQ_MAX_OFFSET + 1)
-#define BSP_PROCESSOR_IRQ_MAX_OFFSET	(BSP_PROCESSOR_IRQ_LOWEST_OFFSET + BSP_PROCESSOR_IRQ_NUMBER - 1)
-  /*
-   * Summary
-   */
-#define BSP_IRQ_NUMBER		 	(BSP_PROCESSOR_IRQ_MAX_OFFSET + 1)
-#define BSP_LOWEST_OFFSET		(BSP_CPM_IRQ_LOWEST_OFFSET)
-#define BSP_MAX_OFFSET			(BSP_PROCESSOR_IRQ_MAX_OFFSET)
-
-  /*
-   * Some SIU IRQ symbolic name definition. Please note that
-   * INT IRQ are defined but a single one will be used to
-   * redirect all CPM interrupt.
-   *
-   * On the mpc8260 all this seems to be transparent.  Although the
-   * CPM, PIT and TMCNT interrupt may well be the only interrupts routed
-   * to the SIU at the hardware level all of them appear as CPM interupts
-   * to software apart from the registers for setting priority.
-   *
-   * The MPC8260 User Manual seems shot through with inconsistencies
-   * about this whole area.
-   */
-
-  /*
-   * Some CPM IRQ symbolic name definition
-   */
-#define BSP_CPM_IRQ_ERROR		(BSP_CPM_IRQ_LOWEST_OFFSET + 0)
-#define BSP_CPM_IRQ_I2C			(BSP_CPM_IRQ_LOWEST_OFFSET + 1)
-#define BSP_CPM_IRQ_SPI			(BSP_CPM_IRQ_LOWEST_OFFSET + 2)
-#define BSP_CPM_IRQ_RISC_TIMERS		(BSP_CPM_IRQ_LOWEST_OFFSET + 3)
-#define BSP_CPM_IRQ_SMC1		(BSP_CPM_IRQ_LOWEST_OFFSET + 4)
-#define BSP_CPM_IRQ_SMC2		(BSP_CPM_IRQ_LOWEST_OFFSET + 5)
-#define BSP_CPM_IRQ_IDMA1		(BSP_CPM_IRQ_LOWEST_OFFSET + 6)
-#define BSP_CPM_IRQ_IDMA2		(BSP_CPM_IRQ_LOWEST_OFFSET + 7)
-#define BSP_CPM_IRQ_IDMA3		(BSP_CPM_IRQ_LOWEST_OFFSET + 8)
-#define BSP_CPM_IRQ_IDMA4		(BSP_CPM_IRQ_LOWEST_OFFSET + 9)
-#define BSP_CPM_IRQ_SDMA		(BSP_CPM_IRQ_LOWEST_OFFSET + 10)
-
-#define BSP_CPM_IRQ_TIMER_1		(BSP_CPM_IRQ_LOWEST_OFFSET + 12)
-#define BSP_CPM_IRQ_TIMER_2		(BSP_CPM_IRQ_LOWEST_OFFSET + 13)
-#define BSP_CPM_IRQ_TIMER_3		(BSP_CPM_IRQ_LOWEST_OFFSET + 14)
-#define BSP_CPM_IRQ_TIMER_4		(BSP_CPM_IRQ_LOWEST_OFFSET + 15)
-#define BSP_CPM_IRQ_TMCNT		(BSP_CPM_IRQ_LOWEST_OFFSET + 16)
-#define BSP_CPM_IRQ_PIT			(BSP_CPM_IRQ_LOWEST_OFFSET + 17)
-
-#define BSP_CPM_IRQ_IRQ1		(BSP_CPM_IRQ_LOWEST_OFFSET + 19)
-#define BSP_CPM_IRQ_IRQ2		(BSP_CPM_IRQ_LOWEST_OFFSET + 20)
-#define BSP_CPM_IRQ_IRQ3		(BSP_CPM_IRQ_LOWEST_OFFSET + 21)
-#define BSP_CPM_IRQ_IRQ4		(BSP_CPM_IRQ_LOWEST_OFFSET + 22)
-#define BSP_CPM_IRQ_IRQ5		(BSP_CPM_IRQ_LOWEST_OFFSET + 23)
-#define BSP_CPM_IRQ_IRQ6		(BSP_CPM_IRQ_LOWEST_OFFSET + 24)
-#define BSP_CPM_IRQ_IRQ7		(BSP_CPM_IRQ_LOWEST_OFFSET + 25)
-
-#define BSP_CPM_IRQ_FCC1		(BSP_CPM_IRQ_LOWEST_OFFSET + 32)
-#define BSP_CPM_IRQ_FCC2		(BSP_CPM_IRQ_LOWEST_OFFSET + 33)
-#define BSP_CPM_IRQ_FCC3		(BSP_CPM_IRQ_LOWEST_OFFSET + 34)
-#define BSP_CPM_IRQ_MCC1		(BSP_CPM_IRQ_LOWEST_OFFSET + 36)
-#define BSP_CPM_IRQ_MCC2		(BSP_CPM_IRQ_LOWEST_OFFSET + 37)
-
-#define BSP_CPM_IRQ_SCC1		(BSP_CPM_IRQ_LOWEST_OFFSET + 40)
-#define BSP_CPM_IRQ_SCC2		(BSP_CPM_IRQ_LOWEST_OFFSET + 41)
-#define BSP_CPM_IRQ_SCC3		(BSP_CPM_IRQ_LOWEST_OFFSET + 42)
-#define BSP_CPM_IRQ_SCC4		(BSP_CPM_IRQ_LOWEST_OFFSET + 43)
-
-#define BSP_CPM_IRQ_PC15		(BSP_CPM_IRQ_LOWEST_OFFSET + 48)
-#define BSP_CPM_IRQ_PC14		(BSP_CPM_IRQ_LOWEST_OFFSET + 49)
-#define BSP_CPM_IRQ_PC13		(BSP_CPM_IRQ_LOWEST_OFFSET + 50)
-#define BSP_CPM_IRQ_PC12		(BSP_CPM_IRQ_LOWEST_OFFSET + 51)
-#define BSP_CPM_IRQ_PC11		(BSP_CPM_IRQ_LOWEST_OFFSET + 52)
-#define BSP_CPM_IRQ_PC10		(BSP_CPM_IRQ_LOWEST_OFFSET + 53)
-#define BSP_CPM_IRQ_PC9			(BSP_CPM_IRQ_LOWEST_OFFSET + 54)
-#define BSP_CPM_IRQ_PC8			(BSP_CPM_IRQ_LOWEST_OFFSET + 55)
-#define BSP_CPM_IRQ_PC7			(BSP_CPM_IRQ_LOWEST_OFFSET + 56)
-#define BSP_CPM_IRQ_PC6			(BSP_CPM_IRQ_LOWEST_OFFSET + 57)
-#define BSP_CPM_IRQ_PC5			(BSP_CPM_IRQ_LOWEST_OFFSET + 58)
-#define BSP_CPM_IRQ_PC4			(BSP_CPM_IRQ_LOWEST_OFFSET + 59)
-#define BSP_CPM_IRQ_PC3			(BSP_CPM_IRQ_LOWEST_OFFSET + 60)
-#define BSP_CPM_IRQ_PC2			(BSP_CPM_IRQ_LOWEST_OFFSET + 61)
-#define BSP_CPM_IRQ_PC1			(BSP_CPM_IRQ_LOWEST_OFFSET + 62)
-#define BSP_CPM_IRQ_PC0			(BSP_CPM_IRQ_LOWEST_OFFSET + 63)
-
-    /*
-     * Some Processor exception handled as rtems IRQ symbolic name definition
-     */
-#define BSP_DECREMENTER			(BSP_PROCESSOR_IRQ_LOWEST_OFFSET)
-#define BSP_PERIODIC_TIMER		(BSP_DECREMENTER)
-
-#define BSP_INTERRUPT_VECTOR_MIN BSP_LOWEST_OFFSET
-
-#define BSP_INTERRUPT_VECTOR_MAX BSP_MAX_OFFSET
-
-#define CPM_INTERRUPT
-
-/*-------------------------------------------------------------------------+
-| Function Prototypes.
-+--------------------------------------------------------------------------*/
-/*
- * ------------------------ PPC CPM Mngt Routines -------
- */
-
-/*
- * function to disable a particular irq. After calling
- * this function, even if the device asserts the interrupt line it will
- * not be propagated further to the processor
- */
-int BSP_irq_disable_at_cpm        (const rtems_irq_number irqLine);
-/*
- * function to enable a particular irq. After calling
- * this function, if the device asserts the interrupt line it will
- * be propagated further to the processor
- */
-int BSP_irq_enable_at_cpm		(const rtems_irq_number irqLine);
-/*
- * function to acknoledge a particular irq. After calling
- * this function, if a device asserts an enabled interrupt line it will
- * be propagated further to the processor. Mainly usefull for people
- * writting raw handlers as this is automagically done for rtems managed
- * handlers.
- */
-int BSP_irq_ack_at_cpm              	(const rtems_irq_number irqLine);
-/*
- * function to check if a particular irq is enabled. After calling
- */
-int BSP_irq_enabled_at_cpm     	(const rtems_irq_number irqLine);
-
-extern void BSP_rtems_irq_mng_init(unsigned cpuId);
-
-#ifdef __cplusplus
-}
-#endif
-
-/* Now that we have defined some basics, include the generic support */
-#include <bsp/irq-generic.h>
-
-#endif
-
-#endif
diff --git a/c/src/lib/libbsp/powerpc/mpc8260ads/preinstall.am b/c/src/lib/libbsp/powerpc/mpc8260ads/preinstall.am
deleted file mode 100644
index 7c3f1a39fd..0000000000
--- a/c/src/lib/libbsp/powerpc/mpc8260ads/preinstall.am
+++ /dev/null
@@ -1,79 +0,0 @@
-## Automatically generated by ampolish3 - Do not edit
-
-if AMPOLISH3
-$(srcdir)/preinstall.am: Makefile.am
-	$(AMPOLISH3) $(srcdir)/Makefile.am > $(srcdir)/preinstall.am
-endif
-
-PREINSTALL_DIRS =
-DISTCLEANFILES += $(PREINSTALL_DIRS)
-
-all-am: $(PREINSTALL_FILES)
-
-PREINSTALL_FILES =
-CLEANFILES = $(PREINSTALL_FILES)
-
-all-local: $(TMPINSTALL_FILES)
-
-TMPINSTALL_FILES =
-CLEANFILES += $(TMPINSTALL_FILES)
-
-$(PROJECT_LIB)/$(dirstamp):
-	@$(MKDIR_P) $(PROJECT_LIB)
-	@: > $(PROJECT_LIB)/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_LIB)/$(dirstamp)
-
-$(PROJECT_INCLUDE)/$(dirstamp):
-	@$(MKDIR_P) $(PROJECT_INCLUDE)
-	@: > $(PROJECT_INCLUDE)/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_INCLUDE)/$(dirstamp)
-
-$(PROJECT_INCLUDE)/bsp/$(dirstamp):
-	@$(MKDIR_P) $(PROJECT_INCLUDE)/bsp
-	@: > $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-PREINSTALL_DIRS += $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-
-$(PROJECT_LIB)/bsp_specs: bsp_specs $(PROJECT_LIB)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_LIB)/bsp_specs
-PREINSTALL_FILES += $(PROJECT_LIB)/bsp_specs
-
-$(PROJECT_INCLUDE)/bsp.h: include/bsp.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp.h
-
-$(PROJECT_INCLUDE)/tm27.h: include/tm27.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/tm27.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/tm27.h
-
-$(PROJECT_INCLUDE)/bspopts.h: include/bspopts.h $(PROJECT_INCLUDE)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bspopts.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bspopts.h
-
-$(PROJECT_INCLUDE)/bsp/bootcard.h: ../../shared/include/bootcard.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/bootcard.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/bootcard.h
-
-$(PROJECT_LIB)/linkcmds: startup/linkcmds $(PROJECT_LIB)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_LIB)/linkcmds
-PREINSTALL_FILES += $(PROJECT_LIB)/linkcmds
-
-$(PROJECT_LIB)/start.$(OBJEXT): start.$(OBJEXT) $(PROJECT_LIB)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_LIB)/start.$(OBJEXT)
-TMPINSTALL_FILES += $(PROJECT_LIB)/start.$(OBJEXT)
-
-$(PROJECT_LIB)/rtems_crti.$(OBJEXT): rtems_crti.$(OBJEXT) $(PROJECT_LIB)/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_LIB)/rtems_crti.$(OBJEXT)
-TMPINSTALL_FILES += $(PROJECT_LIB)/rtems_crti.$(OBJEXT)
-
-$(PROJECT_INCLUDE)/bsp/irq.h: irq/irq.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/irq.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/irq.h
-
-$(PROJECT_INCLUDE)/bsp/irq-generic.h: ../../shared/include/irq-generic.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/irq-generic.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/irq-generic.h
-
-$(PROJECT_INCLUDE)/bsp/irq-info.h: ../../shared/include/irq-info.h $(PROJECT_INCLUDE)/bsp/$(dirstamp)
-	$(INSTALL_DATA) $< $(PROJECT_INCLUDE)/bsp/irq-info.h
-PREINSTALL_FILES += $(PROJECT_INCLUDE)/bsp/irq-info.h
-
diff --git a/c/src/lib/libbsp/powerpc/mpc8260ads/bsp_specs b/c/src/lib/libbsp/powerpc/mpc8260ads/startup/bsp_specs
index 2625609327..2625609327 100644
--- a/c/src/lib/libbsp/powerpc/mpc8260ads/bsp_specs
+++ b/c/src/lib/libbsp/powerpc/mpc8260ads/startup/bsp_specs