fixed to support GW_LCFM

1 files changed, 33 insertions, 10 deletions

diff --git a/c/src/lib/libbsp/powerpc/mpc55xxevb/configure.ac b/c/src/lib/libbsp/powerpc/mpc55xxevb/configure.ac
index 303367629d..69275112c1 100644
--- a/c/src/lib/libbsp/powerpc/mpc55xxevb/configure.ac
+++ b/c/src/lib/libbsp/powerpc/mpc55xxevb/configure.ac
@@ -23,23 +23,37 @@ RTEMS_PROG_CCAS
 RTEMS_CHECK_NETWORKING
 AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
 
+RTEMS_BSPOPTS_SET([DATA_CACHE_ENABLE],[gwlcfm],[0])
+RTEMS_BSPOPTS_SET([DATA_CACHE_ENABLE],[mpc5566evb],[1])
+RTEMS_BSPOPTS_SET([DATA_CACHE_ENABLE],[*],[1])
+RTEMS_BSPOPTS_HELP([DATA_CACHE_ENABLE],
+[If defined, the data cache will be enabled after address translation
+ is turned on.])
+
+RTEMS_BSPOPTS_SET([INSTRUCTION_CACHE_ENABLE],[gwlcfm],[0])
+RTEMS_BSPOPTS_SET([INSTRUCTION_CACHE_ENABLE],[mpc5566evb],[1])
+RTEMS_BSPOPTS_SET([INSTRUCTION_CACHE_ENABLE],[*],[1])
+RTEMS_BSPOPTS_HELP([INSTRUCTION_CACHE_ENABLE],
+[If defined, the instruction cache will be enabled after address translation
+ is turned on.])
+
 RTEMS_BSPOPTS_SET([UARTS_USE_TERMIOS],[*],[0])
 RTEMS_BSPOPTS_HELP([UARTS_USE_TERMIOS],
 [Define to 1 if you want termios support for every port.
  Termios support is independent of the choice of UART I/O mode.])
 
-RTEMS_BSPOPTS_SET([CONSOLE_MINOR],[GWLCFM],[MPC55XX_ESCI_A_MINOR])
+RTEMS_BSPOPTS_SET([CONSOLE_MINOR],[gwlcfm],[MPC55XX_ESCI_A_MINOR])
 RTEMS_BSPOPTS_SET([CONSOLE_MINOR],[*]     ,[MPC55XX_ESCI_A_MINOR])
 RTEMS_BSPOPTS_HELP([CONSOLE_MINOR],
 [Must be defined to be one of MPC55XX_ESCI_A_MINOR or MPC55XX_ESCI_B_MINOR.  Determines which
  device will be registered as /dev/console.])
 
-RTEMS_BSPOPTS_SET([UARTS_IO_MODE],[GWLCFM],[1])
+RTEMS_BSPOPTS_SET([UARTS_IO_MODE],[gwlcfm],[1])
 RTEMS_BSPOPTS_SET([UARTS_IO_MODE],[*]     ,[0])
 RTEMS_BSPOPTS_HELP([UARTS_IO_MODE],
 [Define to 1 if you want interrupt-driven I/O for the SCI ports.])
 
-RTEMS_BSPOPTS_SET([PRINTK_MINOR],[GWLCFM],[MPC55XX_ESCI_A_MINOR])
+RTEMS_BSPOPTS_SET([PRINTK_MINOR],[gwlcfm],[MPC55XX_ESCI_A_MINOR])
 RTEMS_BSPOPTS_SET([PRINTK_MINOR],[*]     ,[MPC55XX_ESCI_B_MINOR])
 RTEMS_BSPOPTS_HELP([PRINTK_MINOR],
 [Must be defined to be one of MPC55XX_ESCI_A_MINOR or MPC55XX_ESCI_B_MINOR.  Determines which
@@ -47,33 +61,42 @@ RTEMS_BSPOPTS_HELP([PRINTK_MINOR],
  I/O.  Don't open the printk port from RTEMS unless also using polled I/O
  for the SCI ports.])
 
-RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_REF_CLOCK],[GWLCFM],[40000000])
+RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_REF_CLOCK],[gwlcfm],[40000000])
 RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_REF_CLOCK],[*]     ,[8000000])
 RTEMS_BSPOPTS_HELP([MPC55XX_FMPLL_REF_CLOCK],
 [Must be defined to be the external reference clock (in Hz) 
  for clock generation])
 
-RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_CLK_OUT],[GWLCFM],[66000000])
+RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_CLK_OUT],[gwlcfm],[66000000])
 RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_CLK_OUT],[*]     ,[128000000])
-RTEMS_BSPOPTS_HELP([MPC55XX_FMPLL_REF_CLOCK],
+RTEMS_BSPOPTS_HELP([MPC55XX_FMPLL_CLK_OUT],
 [Must be defined to be the PLL output clock (in Hz) for clock generation])
 
-RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_PREDIV],[GWLCFM],[10])
+RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_PREDIV],[gwlcfm],[10])
 RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_PREDIV],[*]     ,[1])
 RTEMS_BSPOPTS_HELP([MPC55XX_FMPLL_PREDIV],
 [Must be defined to be the PLL predivider factor for clock generation])
 
-RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_MFD],[GWLCFM],[99])
+RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_MFD],[gwlcfm],[99])
 RTEMS_BSPOPTS_SET([MPC55XX_FMPLL_MFD],[*]     ,[12])
 RTEMS_BSPOPTS_HELP([MPC55XX_FMPLL_MFD],
 [Must be defined to be the PLL multiplication factor for clock generation])
 
+RTEMS_BSPOPTS_SET([MPC55XX_EMIOS_PRESCALER],[gwlcfm],[66])
+RTEMS_BSPOPTS_SET([MPC55XX_EMIOS_PRESCALER],[*]     ,[0])
+RTEMS_BSPOPTS_HELP([MPC55XX_EMIOS_PRESCALER],
+[Must be defined to set the EMIOS prescaler])
+
+RTEMS_BSPOPTS_SET([MPC55XX_CHIP_DERIVATE],[mpc5566evb],[5566])
+RTEMS_BSPOPTS_SET([MPC55XX_CHIP_DERIVATE],[gwlcfm]    ,[5516])
 RTEMS_BSPOPTS_SET([MPC55XX_CHIP_DERIVATE],[*]         ,[5554])
-RTEMS_BSPOPTS_SET([MPC55XX_CHIP_DERIVATE],[MPC5566EVB],[5566])
-RTEMS_BSPOPTS_SET([MPC55XX_CHIP_DERIVATE],[GWLCFM]    ,[5516])
 RTEMS_BSPOPTS_HELP([MPC55XX_CHIP_DERIVATE],
 [specifies the chip derivate in use (e.g. 5554 for MPC5554)])
 
+RTEMS_BSPOPTS_SET([BOARD_GWLCFM],[gwlcfm],[1])
+RTEMS_BSPOPTS_HELP([BOARD_GWLCFM],
+[If defined, use custom settings of for the GW_LCFM board])
+
 AC_CONFIG_FILES([Makefile
 include/bspopts.h])