Merged of mcp750 and mvme2307 BSP by Eric Valette <valette@crf.canon.fr>.

As part of this effort, the mpc750 libcpu code is now shared with the
ppc6xx.

1 files changed, 0 insertions, 41 deletions

diff --git a/c/src/lib/libbsp/powerpc/motorola_powerpc/bootloader/README b/c/src/lib/libbsp/powerpc/motorola_powerpc/bootloader/README
deleted file mode 100644
index 6d36a152ba..0000000000
--- a/c/src/lib/libbsp/powerpc/motorola_powerpc/bootloader/README
+++ /dev/null
@@ -1,41 +0,0 @@
-#
-# $Id$
-#
-
-The code in this directory has been taken WITH PERMISSION from 
-Gabriel Paubert, paubert@iram.es. The main reason for having
-a separate bootloader for PreP compliant firmware is that the 
-initial code is relocated by firmware at an unknow address 
-(actually  0x5000 on motorola MCP750) and that as Gabriel I 
-think having a relocatable bootloder code is a must.
-
-So the way of building a binary executable that can be booted via
-hard disk or network boot goes like this :
-
-	- make a RTEMS executable,
-	- put is as data section in the bootloder binary,
-	- relink the loader (see make-exe macros for details),
-
-I would like to thank Gabriel for his support and his code.
-The original code can be found in form of a patch to official linux 
-kernel at (I insist not vger ppc kernel or Imac ppc kernels!!) :
-
-<ftp://vlab1.iram.es/pub/linux-2.2/> 
-
-After applying the patch, the code is located in a new directory 
-called prepboot.
-
-(NB : note use ftp not netscape...)
-
-Note that the actual code differs a lot since Gabriel choose to use
-a CHRP compliant mapping instead of a Prep Mapping to save
-BATs. I had no time to upgrade the code to its new one allthough
-I agree it should be done...
-
-I have also splitted the original code to have a more modular
-design enabling to reuse code between the loader and RTEMS
-initialization (e.g printk, ...).
-
-Eric Valette (valette@crf.canon.fr)
-
-