diff options
| author | Gedare Bloom <gedare@rtems.org> | 2012-08-06 13:03:46 -0400 |
|---|---|---|
| committer | Gedare Bloom <gedare@rtems.org> | 2012-08-06 13:03:46 -0400 |
| commit | c717fda5c142dac4a7d304e9354d40d06e1ca278 (patch) | |
| tree | 9ed8131b3d3b06ebc8c1279a0a2c5c8e545f2835 /c/src/lib/libbsp/powerpc/gen5200/include | |
| parent | Do not remove scripts upon ./bootstrap -c. Introduce ./bootstrap -c -f. (diff) | |
| download | rtems-c717fda5c142dac4a7d304e9354d40d06e1ca278.tar.bz2 | |
Revert "Add bspopts.h.in."
This reverts commit daffa606cc4a45d93c1f0f4fe365fde0fda6acbb.
Conflicts:
c/src/lib/libbsp/arm/lpc24xx/include/bspopts.h.in
c/src/lib/libbsp/powerpc/mpc55xxevb/include/bspopts.h.in
c/src/lib/libbsp/powerpc/qoriq/include/bspopts.h.in
Manually deleted conflicting files.
Diffstat (limited to 'c/src/lib/libbsp/powerpc/gen5200/include')
| -rw-r--r-- | c/src/lib/libbsp/powerpc/gen5200/include/bspopts.h.in | 85 |
1 files changed, 0 insertions, 85 deletions
diff --git a/c/src/lib/libbsp/powerpc/gen5200/include/bspopts.h.in b/c/src/lib/libbsp/powerpc/gen5200/include/bspopts.h.in deleted file mode 100644 index fae44b7a23..0000000000 --- a/c/src/lib/libbsp/powerpc/gen5200/include/bspopts.h.in +++ /dev/null @@ -1,85 +0,0 @@ -/* include/bspopts.h.in. Generated from configure.ac by autoheader. */ - -/* If set to !0, allow nested IRQ processing. */ -#undef ALLOW_IRQ_NESTING - -/* If set to !0, enable code to benchmark IRQ processing. */ -#undef BENCHMARK_IRQ_PROCESSING - -/* enable settings for BRS5L */ -#undef BRS5L - -/* enables the data cache, if defined to a value other than zero */ -#undef BSP_DATA_CACHE_ENABLED - -/* If defined, then the BSP Framework will put a non-zero pattern into the - RTEMS Workspace and C program heap. This should assist in finding code that - assumes memory starts set to zero. */ -#undef BSP_DIRTY_MEMORY - -/* defines the bits modified in the MPC5200 GPIOPCR register during init. Must - match the hardware requirements */ -#undef BSP_GPIOPCR_INITMASK - -/* defines the bit values written in the MPC5200 GPIOPCR register during init. - Must match the hardware requirements */ -#undef BSP_GPIOPCR_INITVAL - -/* enables the instruction cache, if defined to a value other than zero */ -#undef BSP_INSTRUCTION_CACHE_ENABLED - -/* If defined, print a message and wait until pressed before resetting board - when application exits. */ -#undef BSP_PRESS_KEY_FOR_RESET - -/* If defined, reset the board when the application exits. */ -#undef BSP_RESET_BOARD_AT_EXIT - -/* enable settings for DP2 */ -#undef BSP_TYPE_DP2 - -/* bit mask to specify the UARTS (PSCs), which should be enabled on this - board. Must match the hardware requirements. PSC1 corresponds to the LSB */ -#undef BSP_UART_AVAIL_MASK - -/* enable U-Boot startup */ -#undef HAS_UBOOT - -/* PSC index for GPS module, if defined results in '/dev/gps' */ -#undef MPC5200_PSC_INDEX_FOR_GPS_MODULE - -/* Define to the address where bug reports for this package should be sent. */ -#undef PACKAGE_BUGREPORT - -/* Define to the full name of this package. */ -#undef PACKAGE_NAME - -/* Define to the full name and version of this package. */ -#undef PACKAGE_STRING - -/* Define to the one symbol short name of this package. */ -#undef PACKAGE_TARNAME - -/* Define to the home page for this package. */ -#undef PACKAGE_URL - -/* Define to the version of this package. */ -#undef PACKAGE_VERSION - -/* enable settings for PM520 CR825 */ -#undef PM520_CR825 - -/* enable settings for PM520 ZE30 */ -#undef PM520_ZE30 - -/* console minor number used by printk() */ -#undef PRINTK_MINOR - -/* enable single character mode for the PSC console driver */ -#undef SINGLE_CHAR_MODE - -/* enable interrupt support for the PSC console driver */ -#undef UARTS_USE_TERMIOS_INT - -/* enable settings for IceCube */ -#undef icecube |