Patches rtems-rc-20000118-3.diff and rtems-rc-20000118-4.diff from

Ralf Corsepius <corsepiu@faw.uni-ulm.de> that contain:

    * Modifications, (minor) corrections, cleanups to most existing
      Makefile.ams
    * Adds automake support to all remaining BSPs which have not yet been
      converted to automake.
    * Makefile.am for all remaining wrapup/Makefile.ams

23 files changed, 374 insertions, 762 deletions

diff --git a/c/src/lib/libbsp/powerpc/dmv177/Makefile.am b/c/src/lib/libbsp/powerpc/dmv177/Makefile.am
new file mode 100644
index 0000000000..e8a7c6f744
--- /dev/null
+++ b/c/src/lib/libbsp/powerpc/dmv177/Makefile.am
@@ -0,0 +1,18 @@
+## 
+## $Id$
+## 
+
+AUTOMAKE_OPTIONS = foreign 1.4
+ACLOCAL_AMFLAGS = -I $(RTEMS_TOPdir)/aclocal
+
+# wrapup is the one that actually builds and installs the library
+#  from the individual .rel files built in other directories
+SUBDIRS = include clock console startup start timer scv64 tod \
+    sonic wrapup
+
+include $(top_srcdir)/../../bsp.am
+
+EXTRA_DIST = QUIRKS README.net STATUS bsp_specs cable.doc times
+
+include $(top_srcdir)/../../../../../../automake/subdirs.am
+include $(top_srcdir)/../../../../../../automake/local.am
diff --git a/c/src/lib/libbsp/powerpc/dmv177/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/Makefile.in
deleted file mode 100644
index fe17a37367..0000000000
--- a/c/src/lib/libbsp/powerpc/dmv177/Makefile.in
+++ /dev/null
@@ -1,48 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = .
-
-ACLOCAL = aclocal
-AUTOCONF = autoconf
-ACLOCAL_M4 = $(top_srcdir)/aclocal.m4
-ACLOCAL_AMFLAGS = -I @RTEMS_TOPdir@/aclocal
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/directory.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-SRCS = README
-
-# We only build the networking device driver if HAS_NETWORKING was defined
-NETWORKING_DRIVER_yes_V = sonic
-NETWORKING_DRIVER = $(NETWORKING_DRIVER_$(HAS_NETWORKING)_V)
-
-all: $(SRCS)
-
-# wrapup is the one that actually builds and installs the library
-#  from the individual .rel files built in other directories
-SUBDIRS = include clock console startup start timer scv64 tod \
-    $(NETWORKING_DRIVER) wrapup
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$@ CONFIG_HEADERS= $(SHELL) ./config.status
-
-$(ACLOCAL_M4): @MAINTAINER_MODE_TRUE@ configure.in
-	cd $(srcdir) && $(ACLOCAL) $(ACLOCAL_AMFLAGS)
-
-config.status: $(srcdir)/configure $(CONFIG_STATUS_DEPENDENCIES)
-	$(SHELL) ./config.status --recheck
-$(srcdir)/configure: @MAINTAINER_MODE_TRUE@$(srcdir)/configure.in $(ACLOCAL_M4)
-	cd $(srcdir) && $(AUTOCONF)
diff --git a/c/src/lib/libbsp/powerpc/dmv177/clock/Makefile.am b/c/src/lib/libbsp/powerpc/dmv177/clock/Makefile.am
new file mode 100644
index 0000000000..f5f3fd8112
--- /dev/null
+++ b/c/src/lib/libbsp/powerpc/dmv177/clock/Makefile.am
@@ -0,0 +1,32 @@
+## 
+## $Id$
+## 
+
+AUTOMAKE_OPTIONS = foreign 1.4
+
+PGM = $(ARCH)/clock.rel
+
+C_FILES = clock.c
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o)
+
+OBJS = $(C_O_FILES)
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
+include $(top_srcdir)/../../../../../../automake/lib.am
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+$(PGM): $(OBJS)
+	$(make-rel)
+
+# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
+
+all-local: $(ARCH) $(OBJS) $(PGM)
+
+.PRECIOUS: $(PGM)
+
+EXTRA_DIST = clock.c
+
+include $(top_srcdir)/../../../../../../automake/local.am
diff --git a/c/src/lib/libbsp/powerpc/dmv177/clock/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/clock/Makefile.in
deleted file mode 100644
index 643805ea48..0000000000
--- a/c/src/lib/libbsp/powerpc/dmv177/clock/Makefile.in
+++ /dev/null
@@ -1,70 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ..
-subdir = clock
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-PGM = ${ARCH}/clock.rel
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = clock
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES =
-
-# Assembly source names, if any, go here -- minus the .S
-S_PIECES =
-S_FILES = $(S_PIECES:%=%.S)
-S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
-
-SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-$(PGM): ${OBJS}
-	$(make-rel)
-
-all: ${ARCH} $(SRCS) $(PGM)
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install: all
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/dmv177/configure.in b/c/src/lib/libbsp/powerpc/dmv177/configure.in
index 0b6351347d..100b0d0667 100644
--- a/c/src/lib/libbsp/powerpc/dmv177/configure.in
+++ b/c/src/lib/libbsp/powerpc/dmv177/configure.in
@@ -8,50 +8,34 @@ RTEMS_TOP(../../../../../..)
 AC_CONFIG_AUX_DIR(../../../../../..)
 
 RTEMS_CANONICAL_TARGET_CPU
-AC_PROG_MAKE_SET
-AC_PROG_INSTALL
+AM_INIT_AUTOMAKE(rtems-c-src-lib-libbsp-powerpc-dmv177,$RTEMS_VERSION,no)
 AM_MAINTAINER_MODE
 
+RTEMS_ENABLE_LIBCDIR
 RTEMS_ENABLE_MULTIPROCESSING
 RTEMS_ENABLE_NETWORKING
-RTEMS_ENABLE_LIBCDIR
 
 RTEMS_ENV_RTEMSBSP
-
-RTEMS_CHECK_CPU
-RTEMS_CANONICAL_HOST
-
-RTEMS_PROJECT_ROOT
-
-dnl check target cc
-RTEMS_PROG_CC_FOR_TARGET
-RTEMS_CANONICALIZE_TOOLS
-
 RTEMS_CHECK_CUSTOM_BSP(RTEMS_BSP)
+RTEMS_CHECK_BSP_CACHE(RTEMS_BSP)
 RTEMS_CHECK_MULTIPROCESSING(RTEMS_BSP)
-RTEMS_CHECK_NETWORKING(RTEMS_BSP)
-
-# find all the Makefiles for the BSPs
-RTEMS_CHECK_MAKEFILE(.)
-
-# HACK: sed out bsp-tools from makefiles
-t="tools"
-if test -d "$srcdir/$t"; then
-  bsptools_cfgdirs="$bsptools_cfgdirs $t"
-  makefiles=`echo "$makefiles" | sed -e "s%.*$t/.*Makefile%%g"`
-fi
+RTEMS_CHECK_NETWORKING
+RTEMS_CANONICAL_HOST
 
-if test "$HAS_MP" = "yes"; then
-:
-else
-  # HACK: sed out shmsupp/Makefile from makefiles
-  t="shmsupp"
-  makefiles=`echo "$makefiles" | sed -e "s%.*$t/.*Makefile%%g"`
-fi
+RTEMS_PROJECT_ROOT
+AM_CONDITIONAL(HAS_NETWORKING,test "$HAS_NETWORKING" = "yes")
 AM_CONDITIONAL(HAS_MP,test "$HAS_MP" = "yes")
 
-AC_CONFIG_SUBDIRS($bsptools_cfgdirs)
-
-# try to explicitly list a Makefile here 
+# Explicitly list a Makefile here 
 AC_OUTPUT( 
-$makefiles)
+Makefile
+clock/Makefile
+console/Makefile
+include/Makefile
+scv64/Makefile
+sonic/Makefile
+start/Makefile
+startup/Makefile
+timer/Makefile
+tod/Makefile
+wrapup/Makefile)
diff --git a/c/src/lib/libbsp/powerpc/dmv177/console/Makefile.am b/c/src/lib/libbsp/powerpc/dmv177/console/Makefile.am
new file mode 100644
index 0000000000..30616f4de0
--- /dev/null
+++ b/c/src/lib/libbsp/powerpc/dmv177/console/Makefile.am
@@ -0,0 +1,34 @@
+## 
+## $Id$
+## 
+
+AUTOMAKE_OPTIONS = foreign 1.4
+
+VPATH = @srcdir@:@srcdir@/../../../shared
+
+PGM = $(ARCH)/console.rel
+
+C_FILES = conscfg.c console.c debugio.c
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o)
+
+OBJS = $(C_O_FILES)
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
+include $(top_srcdir)/../../../../../../automake/lib.am
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+$(PGM): $(OBJS)
+	$(make-rel)
+
+# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
+
+all-local: $(ARCH) $(OBJS) $(PGM)
+
+.PRECIOUS: $(PGM)
+
+EXTRA_DIST = conscfg.c debugio.c
+
+include $(top_srcdir)/../../../../../../automake/local.am
diff --git a/c/src/lib/libbsp/powerpc/dmv177/console/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/console/Makefile.in
deleted file mode 100644
index 066e4958a6..0000000000
--- a/c/src/lib/libbsp/powerpc/dmv177/console/Makefile.in
+++ /dev/null
@@ -1,65 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ..
-subdir = console
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@:@srcdir@/../../../shared
-
-PGM = ${ARCH}/console.rel
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = conscfg console debugio
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES =
-
-SRCS = $(C_FILES) $(H_FILES)
-OBJS = $(C_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-$(PGM): ${OBJS}
-	$(make-rel)
-
-all: ${ARCH} $(SRCS) $(PGM)
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install: all
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.am b/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.am
new file mode 100644
index 0000000000..2302aeeecb
--- /dev/null
+++ b/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.am
@@ -0,0 +1,33 @@
+## 
+## $Id$
+## 
+
+AUTOMAKE_OPTIONS = foreign 1.4
+
+H_FILES = bsp.h ../../../shared/include/coverhd.h dmv170.h \
+    ../../../shared/tod.h
+
+$(PROJECT_INCLUDE):
+	$(mkinstalldirs) $@
+
+$(PROJECT_INCLUDE)/bsp.h: bsp.h
+	$(INSTALL_DATA) $< $@
+
+$(PROJECT_INCLUDE)/coverhd.h: ../../../shared/include/coverhd.h
+	$(INSTALL_DATA) $< $@
+
+$(PROJECT_INCLUDE)/dmv170.h: dmv170.h
+	$(INSTALL_DATA) $< $@
+
+$(PROJECT_INCLUDE)/tod.h: ../../../shared/tod.h
+	$(INSTALL_DATA) $< $@
+
+TMPINSTALL_FILES += $(PROJECT_INCLUDE) $(PROJECT_INCLUDE)/bsp.h \
+    $(PROJECT_INCLUDE)/coverhd.h $(PROJECT_INCLUDE)/dmv170.h \
+    $(PROJECT_INCLUDE)/tod.h
+
+all-local: $(TMPINSTALL_FILES)
+
+EXTRA_DIST = bsp.h dmv170.h
+
+include $(top_srcdir)/../../../../../../automake/local.am
diff --git a/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.in
deleted file mode 100644
index 44dea341e7..0000000000
--- a/c/src/lib/libbsp/powerpc/dmv177/include/Makefile.in
+++ /dev/null
@@ -1,53 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ..
-subdir = include
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-H_FILES = $(srcdir)/bsp.h $(srcdir)/../../../shared/include/coverhd.h \
-    $(srcdir)/dmv170.h $(srcdir)/../../../shared/tod.h
-
-#
-#  Equate files are for including from assembly preprocessed by
-#  gm4 or gasp.  No examples are provided except for those for
-#  other CPUs.  The best way to generate them would be to
-#  provide a program which generates the constants used based
-#  on the C equivalents.
-#
-#  If you add equate files, don't forget to uncomment the install line
-#  below.
-#
-
-EQ_FILES =
-
-SRCS = $(H_FILES) $(EQ_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
-
-INSTALLDIRS = $(PROJECT_INCLUDE)
-
-$(INSTALLDIRS):
-	@$(mkinstalldirs) $(INSTALLDIRS)
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-all: $(SRCS)
-	@$(INSTALL_CHANGE) -m 644 $(H_FILES) $(PROJECT_INCLUDE)
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/dmv177/scv64/Makefile.am b/c/src/lib/libbsp/powerpc/dmv177/scv64/Makefile.am
new file mode 100644
index 0000000000..7a552ad128
--- /dev/null
+++ b/c/src/lib/libbsp/powerpc/dmv177/scv64/Makefile.am
@@ -0,0 +1,32 @@
+## 
+## $Id$
+## 
+
+AUTOMAKE_OPTIONS = foreign 1.4
+
+PGM = $(ARCH)/scv64.rel
+
+C_FILES = scv64.c
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o)
+
+OBJS = $(C_O_FILES)
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
+include $(top_srcdir)/../../../../../../automake/lib.am
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+$(PGM): $(OBJS)
+	$(make-rel)
+
+# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
+
+all-local: $(ARCH) $(OBJS) $(PGM)
+
+.PRECIOUS: $(PGM)
+
+EXTRA_DIST = scv64.c
+
+include $(top_srcdir)/../../../../../../automake/local.am
diff --git a/c/src/lib/libbsp/powerpc/dmv177/scv64/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/scv64/Makefile.in
deleted file mode 100644
index 53a1bf210b..0000000000
--- a/c/src/lib/libbsp/powerpc/dmv177/scv64/Makefile.in
+++ /dev/null
@@ -1,68 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ..
-subdir = scv64
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-PGM = ${ARCH}/scv64.rel
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = $(SCV64_C_PIECES)
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES =
-
-SRCS = $(C_FILES) $(H_FILES)
-OBJS = $(C_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-#
-SCV64_C_PIECES = scv64
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-$(PGM): ${OBJS}
-	$(make-rel)
-
-all: ${ARCH} $(SRCS) $(PGM)
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install: all
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/dmv177/sonic/Makefile.am b/c/src/lib/libbsp/powerpc/dmv177/sonic/Makefile.am
new file mode 100644
index 0000000000..a91fafbf9e
--- /dev/null
+++ b/c/src/lib/libbsp/powerpc/dmv177/sonic/Makefile.am
@@ -0,0 +1,34 @@
+## 
+## $Id$
+## 
+
+AUTOMAKE_OPTIONS = foreign 1.4
+
+PGM = $(ARCH)/sonic.rel
+
+C_FILES = dmvsonic.c
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o)
+
+OBJS = $(C_O_FILES)
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
+include $(top_srcdir)/../../../../../../automake/lib.am
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+AM_CPPFLAGS += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__
+
+$(PGM): $(OBJS)
+	$(make-rel)
+
+# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
+
+all-local: $(ARCH) $(OBJS) $(PGM)
+
+.PRECIOUS: $(PGM)
+
+EXTRA_DIST = dmvsonic.c
+
+include $(top_srcdir)/../../../../../../automake/local.am
diff --git a/c/src/lib/libbsp/powerpc/dmv177/sonic/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/sonic/Makefile.in
deleted file mode 100644
index 2bd3f0fcd4..0000000000
--- a/c/src/lib/libbsp/powerpc/dmv177/sonic/Makefile.in
+++ /dev/null
@@ -1,70 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ..
-subdir = sonic
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-PGM = ${ARCH}/sonic.rel
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = dmvsonic
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES =
-
-# Assembly source names, if any, go here -- minus the .S
-S_PIECES =
-S_FILES = $(S_PIECES:%=%.S)
-S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
-
-SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES += -D__INSIDE_RTEMS_BSD_TCPIP_STACK__
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-$(PGM): ${OBJS}
-	$(make-rel)
-
-all: ${ARCH} $(SRCS) $(PGM)
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install: all
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/dmv177/start/Makefile.am b/c/src/lib/libbsp/powerpc/dmv177/start/Makefile.am
new file mode 100644
index 0000000000..354f02440b
--- /dev/null
+++ b/c/src/lib/libbsp/powerpc/dmv177/start/Makefile.am
@@ -0,0 +1,30 @@
+## 
+## $Id$
+## 
+
+AUTOMAKE_OPTIONS = foreign 1.4
+
+PGMS = $(ARCH)/start.o
+
+S_FILES = start.S
+S_O_FILES = $(S_FILES:%.S=$(ARCH)/%.o)
+
+OBJS = $(S_O_FILES)
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
+include $(top_srcdir)/../../../../../../automake/lib.am
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+$(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o: $(PGMS)
+	$(INSTALL_DATA) $< $@
+
+TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/start$(LIB_VARIANT).o
+
+all-local: $(ARCH) $(OBJS) $(TMPINSTALL_FILES)
+
+EXTRA_DIST = start.S
+
+include $(top_srcdir)/../../../../../../automake/local.am
diff --git a/c/src/lib/libbsp/powerpc/dmv177/start/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/start/Makefile.in
deleted file mode 100644
index e22c3d3ba7..0000000000
--- a/c/src/lib/libbsp/powerpc/dmv177/start/Makefile.in
+++ /dev/null
@@ -1,65 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ..
-subdir = start
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-PGMS = ${ARCH}/start.o
-
-# C source names, if any, go here -- minus the .c
-C_PIECES =
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES =
-
-# Assembly source names, if any, go here -- minus the .S
-S_PIECES = start
-S_FILES = $(S_PIECES:%=%.S)
-S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
-
-SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-all: ${ARCH} $(SRCS) $(OBJS) $(PGM)
-	$(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/dmv177/startup/Makefile.am b/c/src/lib/libbsp/powerpc/dmv177/startup/Makefile.am
new file mode 100644
index 0000000000..e0381c0f59
--- /dev/null
+++ b/c/src/lib/libbsp/powerpc/dmv177/startup/Makefile.am
@@ -0,0 +1,38 @@
+## 
+## $Id$
+## 
+
+AUTOMAKE_OPTIONS = foreign 1.4
+
+VPATH = @srcdir@:@srcdir@/../../../shared
+
+PGM = $(ARCH)/startup.rel
+
+C_FILES = bspclean.c bsplibc.c bsppost.c bspstart.c bootcard.c main.c sbrk.c \
+    setvec.c genpvec.c vmeintr.c gnatinstallhandler.c
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o)
+
+OBJS = $(C_O_FILES)
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
+include $(top_srcdir)/../../../../../../automake/lib.am
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+$(PGM): $(OBJS)
+	$(make-rel)
+
+$(PROJECT_RELEASE)/lib/linkcmds: linkcmds
+	$(INSTALL_DATA) $< $@
+
+TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/linkcmds
+
+all-local: $(ARCH) $(OBJS) $(PGM) $(TMPINSTALL_FILES)
+
+.PRECIOUS: $(PGM)
+
+EXTRA_DIST = bspclean.c bspstart.c genpvec.c linkcmds setvec.c vmeintr.c
+
+include $(top_srcdir)/../../../../../../automake/local.am
diff --git a/c/src/lib/libbsp/powerpc/dmv177/startup/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/startup/Makefile.in
deleted file mode 100644
index f060a25721..0000000000
--- a/c/src/lib/libbsp/powerpc/dmv177/startup/Makefile.in
+++ /dev/null
@@ -1,75 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ..
-subdir = startup
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@:@srcdir@/../../../shared
-
-PGM = ${ARCH}/startup.rel
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = bspclean bsplibc bsppost bspstart bootcard main sbrk setvec \
-    genpvec vmeintr gnatinstallhandler
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES =
-
-# Assembly source names, if any, go here -- minus the .S
-S_PIECES =
-S_FILES = $(S_PIECES:%=%.S)
-S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
-
-SRCS = linkcmds $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(C_O_FILES) $(S_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-mkinstalldirs = $(SHELL) $(top_srcdir)/@RTEMS_TOPdir@/mkinstalldirs
-
-INSTALLDIRS = $(PROJECT_RELEASE)/lib
-
-$(INSTALLDIRS):
-	@$(mkinstalldirs) $(INSTALLDIRS)
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-$(PGM): ${OBJS}
-	$(make-rel)
-
-all: ${ARCH} $(SRCS) $(PGM)
-	$(INSTALL_CHANGE) -m 644 $(srcdir)/linkcmds $(PROJECT_RELEASE)/lib
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.am b/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.am
new file mode 100644
index 0000000000..7f16dcc233
--- /dev/null
+++ b/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.am
@@ -0,0 +1,32 @@
+## 
+## $Id$
+## 
+
+AUTOMAKE_OPTIONS = foreign 1.4
+
+PGM = $(ARCH)/timer.rel
+
+C_FILES = timer.c
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o)
+
+OBJS = $(C_O_FILES)
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
+include $(top_srcdir)/../../../../../../automake/lib.am
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+$(PGM): $(OBJS)
+	$(make-rel)
+
+# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
+
+all-local: $(ARCH) $(OBJS) $(PGM)
+
+.PRECIOUS: $(PGM)
+
+EXTRA_DIST = timer.c
+
+include $(top_srcdir)/../../../../../../automake/local.am
diff --git a/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.in
deleted file mode 100644
index fbad29fdbc..0000000000
--- a/c/src/lib/libbsp/powerpc/dmv177/timer/Makefile.in
+++ /dev/null
@@ -1,70 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ..
-subdir = timer
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-PGM = ${ARCH}/timer.rel
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = timer
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES =
-
-# Assembly source names, if any, go here -- minus the .S
-S_PIECES =
-S_FILES = $(S_PIECES:%=%.S)
-S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
-
-SRCS = $(C_FILES) $(CC_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(C_O_FILES) $(CC_O_FILES) $(S_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-$(PGM): ${OBJS}
-	$(make-rel)
-
-all: ${ARCH} $(SRCS) $(PGM)
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install: all
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/dmv177/tod/Makefile.am b/c/src/lib/libbsp/powerpc/dmv177/tod/Makefile.am
new file mode 100644
index 0000000000..0887a9830b
--- /dev/null
+++ b/c/src/lib/libbsp/powerpc/dmv177/tod/Makefile.am
@@ -0,0 +1,34 @@
+## 
+## $Id$
+## 
+
+AUTOMAKE_OPTIONS = foreign 1.4
+
+VPATH = @srcdir@:@srcdir@/../../../shared
+
+PGM = $(ARCH)/tod.rel
+
+C_FILES = todcfg.c tod.c
+C_O_FILES = $(C_FILES:%.c=$(ARCH)/%.o)
+
+OBJS = $(C_O_FILES)
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
+include $(top_srcdir)/../../../../../../automake/lib.am
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+$(PGM): $(OBJS)
+	$(make-rel)
+
+# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
+
+all-local: $(ARCH) $(OBJS) $(PGM)
+
+.PRECIOUS: $(PGM)
+
+EXTRA_DIST = todcfg.c
+
+include $(top_srcdir)/../../../../../../automake/local.am
diff --git a/c/src/lib/libbsp/powerpc/dmv177/tod/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/tod/Makefile.in
deleted file mode 100644
index 3275aec0dd..0000000000
--- a/c/src/lib/libbsp/powerpc/dmv177/tod/Makefile.in
+++ /dev/null
@@ -1,68 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ..
-subdir = tod
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@:@srcdir@/../../../shared
-
-PGM = ${ARCH}/tod.rel
-
-# C source names, if any, go here -- minus the .c
-C_PIECES = todcfg $(TOD_C_PIECES)
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES =
-
-SRCS = $(C_FILES) $(H_FILES)
-OBJS = $(C_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-# First and second generation use different RTC chips :(
-TOD_C_PIECES = tod
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-$(PGM): ${OBJS}
-	$(make-rel)
-
-all: ${ARCH} $(SRCS) $(PGM)
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install: all
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/powerpc/dmv177/wrapup/Makefile.am b/c/src/lib/libbsp/powerpc/dmv177/wrapup/Makefile.am
new file mode 100644
index 0000000000..792d785bb5
--- /dev/null
+++ b/c/src/lib/libbsp/powerpc/dmv177/wrapup/Makefile.am
@@ -0,0 +1,38 @@
+## 
+## $Id$
+## 
+
+AUTOMAKE_OPTIONS = foreign 1.4
+
+# We only build the networking device driver if HAS_NETWORKING was defined
+if HAS_NETWORKING
+NETWORKING = sonic
+endif
+
+# pieces specific to this BSP
+BSP_PIECES = startup clock console scv64 timer tod $(NETWORKING)
+
+# bummer; have to use $foreach since % pattern subst rules only replace 1x
+OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o))
+LIB = $(ARCH)/libbsp.a
+
+include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
+include $(top_srcdir)/../../../../../../automake/lib.am
+
+#
+# (OPTIONAL) Add local stuff here using +=
+#
+
+$(LIB): $(OBJS)
+	$(make-library)
+
+$(PROJECT_RELEASE)/lib/libbsp$(LIB_VARIANT).a: $(LIB)
+	$(INSTALL_DATA) $< $@
+
+TMPINSTALL_FILES += $(PROJECT_RELEASE)/lib/libbsp$(LIB_VARIANT).a
+
+all-local: $(ARCH) $(OBJS) $(LIB) $(TMPINSTALL_FILES)
+
+.PRECIOUS: $(LIB)
+
+include $(top_srcdir)/../../../../../../automake/local.am
diff --git a/c/src/lib/libbsp/powerpc/dmv177/wrapup/Makefile.in b/c/src/lib/libbsp/powerpc/dmv177/wrapup/Makefile.in
deleted file mode 100644
index b9a03b583d..0000000000
--- a/c/src/lib/libbsp/powerpc/dmv177/wrapup/Makefile.in
+++ /dev/null
@@ -1,75 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ..
-subdir = wrapup
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-# We only build the networking device driver if HAS_NETWORKING was defined
-NETWORKING_DRIVER_yes_V = sonic
-NETWORKING_DRIVER = $(NETWORKING_DRIVER_$(HAS_NETWORKING)_V)
-
-# pieces specific to this BSP
-BSP_PIECES = startup clock console scv64 timer tod $(NETWORKING_DRIVER)
-
-# pieces to pick up out of libcpu/$(RTEMS_CPU)
-CPU_PIECES =
-
-# shared pieces
-GENERIC_PIECES =
-
-# bummer; have to use $foreach since % pattern subst rules only replace 1x
-OBJS = $(foreach piece, $(BSP_PIECES), $(wildcard ../$(piece)/$(ARCH)/*.o)) \
-    $(foreach piece, $(CPU_PIECES), \
-    ../../../../libcpu/$(RTEMS_CPU)/$(piece)/$(ARCH)/$(piece).rel) $(foreach \
-    piece, $(GENERIC_PIECES), ../../../$(piece)/$(ARCH)/$(piece).rel)
-LIB = $(ARCH)/libbsp.a
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/lib.cfg
-
-INSTALL = @INSTALL@
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-$(LIB): ${OBJS}
-	$(make-library)
-
-all: ${ARCH} $(SRCS) $(LIB)
-	$(INSTALL_VARIANT) -m 644 $(LIB) $(PROJECT_RELEASE)/lib
-
-$(PROJECT_ROOT)/@RTEMS_BSP@/lib/bsp_specs: ../bsp_specs
-	$(INSTALL_DATA) $< $@
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status