bsps: Move GDB stubs to bsps

This patch is a part of the BSP source reorganization.

Update #3285.

1 files changed, 0 insertions, 100 deletions

diff --git a/c/src/lib/libbsp/mips/shared/gdbstub/memlimits.h b/c/src/lib/libbsp/mips/shared/gdbstub/memlimits.h
deleted file mode 100644
index c60ca12111..0000000000
--- a/c/src/lib/libbsp/mips/shared/gdbstub/memlimits.h
+++ /dev/null
@@ -1,100 +0,0 @@
-/**
- * @file
- * @ingroup mips_limits
- * @brief Definition of machine and system dependent address limits.
- */
-
-/*
- * limits.h - definition of machine & system dependent address limits
- *
- *                   THIS SOFTWARE IS NOT COPYRIGHTED
- *
- *  The following software is offered for use in the public domain.
- *  There is no warranty with regard to this software or its performance
- *  and the user must accept the software "AS IS" with all faults.
- *
- *  THE CONTRIBUTORS DISCLAIM ANY WARRANTIES, EXPRESS OR IMPLIED, WITH
- *  REGARD TO THIS SOFTWARE INCLUDING BUT NOT LIMITED TO THE WARRANTIES
- *  OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE.
- */
-
-#ifndef _MEMLIMITS_H_
-#define _MEMLIMITS_H_
-
-/*
- * The macros in this file are specific to a given implementation.
- * The general rules for their construction are as follows:
- *
- * 1.) is_readable(addr,length) should be true if and only if the
- *     region starting at the given virtual address can be read
- *     _without_ causing an exception or other fatal error.  Note
- *     that the stub will use the strictest alignment satisfied
- *     by _both_ addr and length (e.g., if both are divisible by
- *     8 then the region will be read in double-word chunks).
- *
- * 2.) is_writeable(addr,length) should be true if and only if the
- *     region starting at the given virtual address can be written
- *     _without_ causing an exception or other fatal error.  Note
- *     that the stub will use the strictest alignment satisfied
- *     by _both_ addr and length (e.g., if both are divisible by
- *     8 then the region will be written in double-word chunks).
- *
- * 3.) is-steppable(ptr) whould be true if and only if ptr is the
- *     address of a writeable region of memory which may contain
- *     an executable instruction.  At a minimum this requires that
- *     ptr be word-aligned (divisible by 4) and not point to EPROM
- *     or memory-mapped I/O.
- *
- * Note: in order to satisfy constraints related to cacheability
- * of certain memory subsystems it may be necessary for regions
- * of kseg0 and kseg1 which map to the same physical addresses
- * to have different readability and/or writeability attributes.
- */
-
-/**
- * @defgroup mips_limits Address Limits
- * @ingroup mips_shared
- * @brief Address Limits
- */
-
-
-/*
-#define K0_LIMIT_FOR_READ  (K0BASE+0x18000000)
-#define K1_LIMIT_FOR_READ  (K1BASE+K1SIZE)
-
-#define is_readable(addr,length) \
- (((K0BASE <= addr) && ((addr + length) <= K0_LIMIT_FOR_READ)) \
-  || ((K1BASE <= addr) && ((addr + length) <= K1_LIMIT_FOR_READ)))
-
-#define K0_LIMIT_FOR_WRITE (K0BASE+0x08000000)
-#define K1_LIMIT_FOR_WRITE (K1BASE+0x1e000000)
-
-#define is_writeable(addr,length) \
- (((K0BASE <= addr) && ((addr + length) <= K0_LIMIT_FOR_WRITE)) \
-  || ((K1BASE <= addr) && ((addr + length) <= K1_LIMIT_FOR_WRITE)))
-
-#define K0_LIMIT_FOR_STEP  (K0BASE+0x08000000)
-#define K1_LIMIT_FOR_STEP  (K1BASE+0x08000000)
-
-#define is_steppable(ptr) \
- ((((int)ptr & 0x3) == 0) \
-  && (((K0BASE <= (int)ptr) && ((int)ptr < K0_LIMIT_FOR_STEP)) \
-      || ((K1BASE <= (int)ptr) && ((int)ptr < K1_LIMIT_FOR_STEP))))
-
-struct memseg
-{
-      unsigned begin, end, opts;
-};
-
-#define MEMOPT_READABLE   1
-#define MEMOPT_WRITEABLE  2
-
-#define NUM_MEMSEGS     10
-
-int add_memsegment(unsigned,unsigned,int);
-int is_readable(unsigned,unsigned);
-int is_writeable(unsigned,unsigned);
-int is_steppable(unsigned);
-*/
-
-#endif  /* _MEMLIMITS_H_ */