Renaming all BSP specific startXXX directories to use the same name (start).

2 files changed, 0 insertions, 334 deletions

diff --git a/c/src/lib/libbsp/m68k/gen68302/start302/Makefile.in b/c/src/lib/libbsp/m68k/gen68302/start302/Makefile.in
deleted file mode 100644
index f9ef3dde4f..0000000000
--- a/c/src/lib/libbsp/m68k/gen68302/start302/Makefile.in
+++ /dev/null
@@ -1,68 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-top_srcdir = @top_srcdir@
-top_builddir = ../../..
-subdir = m68k/gen68302/start302
-
-RTEMS_ROOT = @RTEMS_ROOT@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-VPATH = @srcdir@
-
-PGMS = ${ARCH}/start302.o
-
-# C source names, if any, go here -- minus the .c
-C_PIECES =
-C_FILES = $(C_PIECES:%=%.c)
-C_O_FILES = $(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES =
-
-# Assembly source names, if any, go here -- minus the .S
-S_PIECES = start302
-S_FILES = $(S_PIECES:%=%.S)
-S_O_FILES = $(S_FILES:%.S=${ARCH}/%.o)
-
-SRCS = $(C_FILES) $(H_FILES) $(S_FILES)
-OBJS = $(C_O_FILES) $(S_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/@RTEMS_BSP@.cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-INSTALL_CHANGE = @INSTALL_CHANGE@
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES +=
-CPPFLAGS +=
-CFLAGS +=
-
-LD_PATHS +=
-LD_LIBS +=
-LDFLAGS +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-all: ${ARCH} $(SRCS) $(OBJS) $(PGM)
-	$(INSTALL_VARIANT) -m 755 ${PGMS} $(PROJECT_RELEASE)/lib
-
-# Install the program(s), appending _g or _p as appropriate.
-# for include files, just use $(INSTALL_CHANGE)
-
-Makefile: $(srcdir)/Makefile.in $(top_builddir)/config.status
-	cd $(top_builddir) \
-	 && CONFIG_FILES=$(subdir)/$@ CONFIG_HEADERS= $(SHELL) ./config.status
diff --git a/c/src/lib/libbsp/m68k/gen68302/start302/start302.S b/c/src/lib/libbsp/m68k/gen68302/start302/start302.S
deleted file mode 100644
index 5e46b06edf..0000000000
--- a/c/src/lib/libbsp/m68k/gen68302/start302/start302.S
+++ /dev/null
@@ -1,266 +0,0 @@
-/*  entry.s
- *
- *  This file contains the entry point for the application.
- *  The name of this entry point is compiler dependent.
- *  It jumps to the BSP which is responsible for performing
- *  all initialization.
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.OARcorp.com/rtems/license.html.
- *
- *  $Id$
- */
-
-#include "asm.h"
-
-  .set	BAR,		0xF2		| Base Address Register location
-  .set	SCR,		0xF4		| System Control Register location
-  .set	BAR_VAL,	0x0f7f		| BAR value
-  .set	SCR_VAL,	0x00080f00	| SCR value
-  .set	GIMR_VAL,	0x8780		|Global Interrupt Mode Register. (MUST BE WRITTEN).
-  .set	BaseAddr,(BAR_VAL&0x0fff)<<12	| MC68302 internal base address
-
-  .set	oSYSRAM,	0x000		| 576 bytes of internal system RAM
-
-  .set	oGIMR,		0x812
-
-  .set	oCS0_Base,	0x830		| 16 bits, Chip Sel 0 Base Reg
-  .set	oCS0_Option,	0x832		| 16 bits, Chip Sel 0 Option Reg
-  .set	oCS1_Base,	0x834		| 16 bits, Chip Sel 1 Base Reg
-  .set	oCS1_Option,	0x836		| 16 bits, Chip Sel 1 Option Reg
-  .set	oCS2_Base,	0x838		| 16 bits, Chip Sel 2 Base Reg
-  .set	oCS2_Option,	0x83a		| 16 bits, Chip Sel 2 Option Reg
-  .set	oCS3_Base,	0x83c		| 16 bits, Chip Sel 3 Base Reg
-  .set	oCS3_Option,	0x83e		| 16 bits, Chip Sel 3 Option Reg
-
-  .set	tmpSRAM_BASE,	0x400000	| start of temporary SRAM
-  .set	FLASH_BASE,	0xc00000	| start of FLASH''s normal location
-
-
-BEGIN_CODE
-         PUBLIC (M68Kvec)               | Vector Table
-SYM (M68Kvec):				| standard location for vectors
-V___ISSP: .long	0x00001000		|00  0 Reset: Initial SSP
-V____IPC: .long	SYM(start)-V___ISSP	|04  1 Reset: Initial PC
-V_BUSERR: .long	Bad-V___ISSP		|08  2 Bus Error
-V_ADRERR: .long	Bad-V___ISSP		|0c  3 Address Error
-	.space	240			| reserve space for reset of vectors
-
-#if ( M68K_HAS_SEPARATE_STACKS == 1 )
-SYM (lowintstack):
-        .space   4092                   | reserve for interrupt stack
-SYM (hiintstack):
-        .space   4                      | end of interrupt stack
-#endif
-
-	PUBLIC (start)                 | Default entry point for GNU
-SYM (start):
-	move.w	#0x2700,sr		| Disable all interrupts
-	move.w	#BAR_VAL,BAR		| Set Base Address Register
-	move.l	#SCR_VAL,SCR		| Set System Control Register
-	lea	BaseAddr,a5
-	move.w	#GIMR_VAL,a5@(oGIMR)	| Set Global Interrupt Mode Register
-
-|
-| Set up chip select registers for the remapping process.
-|
-
-|
-|      0      X      x    x    x    x
-| 0  000 0  0-- -  --- ---- ---- ----
-| x  xxx x  xxx x  xx
-|
-	move.w	#0xc001,a5@(oCS0_Base)   | Expand CS0 to full size (FLASH)
-	move.w	#0x1f82,a5@(oCS0_Option) | 000000-03ffff, R, 0 WS
-
-|
-|      X      x      x    x    x    x
-| 0  100 0  0-- -  --- ---- ---- ----
-| x  xxx x  xxx x  xx
-|
-	move.w	#0xa801,a5@(oCS1_Base)   | Set up and enable CS1 (SRAM)
-	move.w	#0x1f80,a5@(oCS1_Option) | 400000-43ffff, RW, 0 WS
-
-|
-| Copy the initial boot FLASH area to the temporary SRAM location.
-|
-		moveq	#0,d0
-		movea.l	d0,a0			| a0 -> start of FLASH
-		lea	tmpSRAM_BASE,a1 	| a1 -> start of tmp SRAM
-|		moveq	#(endPreBoot-V___ISSP)/4,d0	| # longs to copy
-		moveq	#127,d0
-cpy_flash:	move.l	(a0)+,(a1)+		| copy
-		subq.l	#1,d0
-		bne	cpy_flash
-
-|
-| Copy remap code to 68302''s internal system RAM.
-|
-		movea.w	#begRemap-V___ISSP,a0	| a0 -> remap code
-		lea	a5@(oSYSRAM),a1	| a1 -> internal system RAM
-|		moveq	#(endRemap-begRemap)/2-1,d0	| d0 = # words to copy
-		moveq	#11,d0
-cpy_remap:	move.w	(a0)+,(a1)+		| copy
-		dbra	d0,cpy_remap
-
-|
-| Jump to the remap code in the 68302''s internal system RAM.
-|
-		jmp	a5@(oSYSRAM)		| (effectively a jmp begRemap)
-
-|
-| This remap code, when executed from the 68302''s internal system RAM
-| will 1) remap CS1 so that SRAM is at 0
-|      2) remap CS0 so that FLASH is at FLASH_BASE
-|  and 3) jump to executable code in the remapped FLASH.
-|
-begRemap:	move.w	#0xa001,a5@(oCS1_Base)	| Move CS1 (SRAM)
-		move.w	#0xd801,a5@(oCS0_Base)	| Move CS0 (FLASH)
-		lea	FLASH_BASE,a0
-		jmp	a0@(endRemap-V___ISSP.w)	| Jump back to FLASH
-endRemap:
-|
-| Now set up the remaining chip select registers.
-|
-
-|
-|      4      0      x    x    x    x
-| 1  000 1  111 0  000 0--- ---- ----
-| x  xxx x  xxx x  xx
-|
- 	move.w	#0xb1e1,a5@(oCS2_Base)		| Set up and enable CS2 (dpRAM)
- 	move.w	#0x1ff0,a5@(oCS2_Option)	| 8f0000-8f07ff, RW, 0 WS
-
-|
-|      8      X      x    x    x    x
-| 1  000 0  0-- -  --- ---- ---- ----
-| x  xxx x  xxx x  xx
-|
-	move.w	#0xd001,a5@(oCS3_Base)		| Set up and enable CS3 (IO)
-	move.w	#0x1f80,a5@(oCS3_Option)	| 800000-83ffff, RW, 0 WS
-
-endPreBoot:
-
-	move.b	#0x30,0x800001			| set status LED amber
-
- .set	oPIOB_Ctrl,	0x824
- .set	oPIOB_DDR,	0x826
- .set	oPIOB_Data,	0x828
-
- .set	oPIOA_Ctrl,	0x81e
- .set	oPIOA_DDR,	0x820
- .set	oPIOA_Data,	0x822
-
-	move.w	#0x0ff8,a5@(oPIOB_Data)	| Make output follow resistors.
-	move.w	#0x00ff,a5@(oPIOB_DDR)		| Set up PB7-PB0 for output.
-	move.w	#0x0080,a5@(oPIOB_Ctrl)	| Set up WDOG* as dedicated
-						| peripheral pins.
-
-	move.w	#0x1fff,a5@(oPIOA_Data)	| Make output follow resistors.
-	move.w	#0xea2a,a5@(oPIOA_DDR)		| Set up PA15-PA0 for in/output.
-	move.w	#0x0003,a5@(oPIOA_Ctrl)	| Set up TXD2/RXD2 as dedicated
-						| peripheral pins.
-
-|
-| Place "Bad" in all vectors from 010 thru 0ec.  Vectors 0f0 and 0f4
-| are not set because they are the 68302''s BAR and SCR.
-|
-		movea.w	#0x010,a0
-		moveq	#(0x0f0-0x010)/4-1,d0
-		move.l	#Bad,d1
-cpy_Bad:	move.l	d1,(a0)+
-		dbra	d0,cpy_Bad
-
- .set	vbase,	0x0200
-
-		lea	vbase,a0
-		moveq	#31,d0
-cpy_Bad1:	move.l	d1,(a0)+
-		dbra	d0,cpy_Bad1
-
-|
-| Fill in special locations to configure OS
-|
-		move.l	#Bad,0x008		| Bus Error
-		move.l	#Bad,0x00c		| Address Error
-		move.l	#Bad,0x024		| Trace
-|		move.l	#KE_IRET,$0b4		| pSOS+ RET_I Call
-
-|		move.l	#_cnsl_isr,vbase+0x028	| SCC2
-		move.l	#timerisr,vbase+0x018	| Timer ISR
-
-        |
-        | zero out uninitialized data area
-        |
-zerobss:
-        moveal  # SYM (end),a0                | find end of .bss
-        moveal  # SYM (bss_start),a1          | find beginning of .bss
-        moveq   #0,d0
-
-loop:   movel   d0,a1@+                | to zero out uninitialized
-        cmpal   a0,a1
-        jlt     loop                    | loop until _end reached
-
-        movel   # SYM (end),d0               | d0 = end of bss/start of heap
-        addl    # SYM (heap_size),d0          | d0 = end of heap
-        movel   d0, SYM (stack_start)  | Save for brk() routine
-        addl    # SYM (stack_size),d0         | make room for stack
-        andl    #0xffffffc0,d0         | align it on 16 byte boundary
-        movw    #0x3700,sr             | SUPV MODE,INTERRUPTS OFF!!!
-        movel   d0,a7                 | set master stack pointer
-        movel   d0,a6                 | set base pointer
-
-      /*
-       *  RTEMS should maintain a separate interrupt stack on CPUs
-       *  without one in hardware.  This is currently not supported
-       *  on versions of the m68k without a HW intr stack.
-       */
-
-#if ( M68K_HAS_SEPARATE_STACKS == 1 )
-        lea     SYM (hiintstack),a0          | a0 = high end of intr stack
-        movec   a0,isp                | set interrupt stack
-#endif
-
-        move.l  #0,a7@-               | environp
-        move.l  #0,a7@-               | argv
-        move.l  #0,a7@-               | argc
-        jsr     SYM (boot_card)
-
-	nop
-Bad:	bra	Bad
-
-	nop
-END_CODE
-
-
-BEGIN_DATA
-
-	PUBLIC (start_frame)
-SYM (start_frame):
-        .space  4,0
-
-	PUBLIC (stack_start)
-SYM (stack_start):
-        .space  4,0
-END_DATA
-
-BEGIN_BSS
-
-	PUBLIC (environ)
-        .align 2
-SYM (environ):
-        .long  0
-
-	PUBLIC (heap_size)
-        .set   SYM (heap_size),0x2000
-
-        PUBLIC (stack_size)
-        .set   SYM (stack_size),0x1000
-
-
-END_DATA
-END