2004-01-07 Joel Sherrill <joel@OARcorp.com>

	Per John S. Gwynne <jgwynne@mrcday.com>, there are no longer any
	users of these boards so we are removing them.
	* efi332/.cvsignore, efi332/ChangeLog, efi332/Makefile.am,
	efi332/README, efi332/bsp_specs, efi332/configure.ac, efi332/times,
	efi332/clock/.cvsignore, efi332/clock/Makefile.am,
	efi332/clock/ckinit.c, efi332/console/.cvsignore,
	efi332/console/Makefile.am, efi332/console/console.c,
	efi332/include/.cvsignore, efi332/include/bsp.h,
	efi332/include/efi332.h, efi332/misc/dotests, efi332/misc/gdbinit68,
	efi332/misc/interr.c, efi332/spurious/.cvsignore,
	efi332/spurious/Makefile.am, efi332/spurious/spinit.c,
	efi332/start/.cvsignore, efi332/start/Makefile.am,
	efi332/start/except_vect_332_ROM.S, efi332/start/ram_init.ld,
	efi332/start/ram_init.sed, efi332/start/start.c,
	efi332/startup/.cvsignore, efi332/startup/Makefile.am,
	efi332/startup/bspclean.c, efi332/startup/bspstart.c,
	efi332/startup/linkcmds, efi332/startup/linkcmds_ROM,
	efi332/timer/.cvsignore, efi332/timer/Makefile.am,
	efi332/timer/timer.c, efi332/wrapup/.cvsignore,
	efi332/wrapup/Makefile.am, efi68k/.cvsignore, efi68k/ChangeLog,
	efi68k/Makefile.am, efi68k/README, efi68k/bsp_specs,
	efi68k/configure.ac, efi68k/times, efi68k/clock/.cvsignore,
	efi68k/clock/Makefile.am, efi68k/clock/ckinit.c,
	efi68k/console/.cvsignore, efi68k/console/Makefile.am,
	efi68k/console/console.c, efi68k/include/.cvsignore,
	efi68k/include/16550.h, efi68k/include/DP8570A.h,
	efi68k/include/bsp.h, efi68k/include/efi68k.h,
	efi68k/spurious/.cvsignore, efi68k/spurious/Makefile.am,
	efi68k/spurious/spinit.c, efi68k/start/.cvsignore,
	efi68k/start/start.c, efi68k/startup/.cvsignore,
	efi68k/startup/Makefile.am, efi68k/startup/bspclean.c,
	efi68k/startup/bspstart.c, efi68k/startup/efi68k_tcp.c,
	efi68k/startup/efi68k_wd.c, efi68k/startup/linkcmds,
	efi68k/startup/m68k-stub.c, efi68k/startup/setvec.c,
	efi68k/timer/.cvsignore, efi68k/timer/Makefile.am,
	efi68k/timer/timer.c, efi68k/wrapup/.cvsignore,
	efi68k/wrapup/Makefile.am: Removed.

1 files changed, 0 insertions, 150 deletions

diff --git a/c/src/lib/libbsp/m68k/efi68k/clock/ckinit.c b/c/src/lib/libbsp/m68k/efi68k/clock/ckinit.c
deleted file mode 100644
index 6640e6e0c9..0000000000
--- a/c/src/lib/libbsp/m68k/efi68k/clock/ckinit.c
+++ /dev/null
@@ -1,150 +0,0 @@
-/*  Clock_init()
- *
- *  This routine initializes the DP8570A periodic interrupt on the 
- *  efi68k board. The tick frequency is 1 millisecond.
- *
- *  Input parameters:  NONE
- *
- *  Output parameters:  NONE
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <stdlib.h>
-#include <bsp.h>
-#include <rtems/libio.h>
-#include <DP8570A.h>
-
-#define CLOCK_VECTOR  (TCP_ISR_LEVEL+24)
-
-rtems_unsigned32 Clock_isrs;        /* ISRs until next tick */
-volatile rtems_unsigned32 Clock_driver_ticks;
-                                    /* ticks since initialization */
-rtems_isr_entry  Old_ticker;
-
-void Clock_exit( void );
- 
-/*
- * These are set by clock driver during its init
- */
- 
-rtems_device_major_number rtems_clock_major = ~0;
-rtems_device_minor_number rtems_clock_minor;
-
-
-void per_interrupt(void)
-{
-  Clock_driver_ticks += 1;
-
-  *MSR = PER;
-
-  if ( Clock_isrs == 1 ) {
-    rtems_clock_tick();
-    Clock_isrs = BSP_Configuration.microseconds_per_tick / 1000;
-  }
-  else
-    Clock_isrs -= 1;
-}
-
-rtems_isr Clock_isr(
-  rtems_vector_number vector
-)
-{
-  unsigned char entry_msr, msr;
-
-  entry_msr = *MSR;
-  *MSR = 0;
-  while ( (msr=*MSR) & INT )
-    /* test enabled interrupt bits */
-    if (msr & PER)
-      per_interrupt();
-    else if (msr & T0) {
-      *MSR = T0;		/* reset interrupt */
-      Timer_interrupts++;	/* inc wrap around counter */
-    }
-    else      
-      /* there has been an error if we reach this point */
-      /* default action: reset all the interrupts */
-      *MSR = ( PER | AL | T0 | T1 );
-  *MSR = entry_msr & (RS | PS);
-}
-
-void Install_clock(
-  rtems_isr_entry clock_isr
-)
-{
-  Clock_driver_ticks = 0;
-  Clock_isrs = BSP_Configuration.microseconds_per_tick / 1000;
-
-  Old_ticker = (rtems_isr_entry) set_vector( clock_isr, CLOCK_VECTOR, 1 );
-
-  *MSR = RS;			/* enable 1mS interrupts */
-  *ICR0 |= OME;
-
-  atexit( Clock_exit );
-}
-
-void Clock_exit( void )
-{
-  /* shutdown periodic interrupt */
-  *MSR = RS;
-  *ICR0 &= 0xc0;
-  /* do not restore old vector */
-}
-
-rtems_device_driver Clock_initialize(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void *pargp
-)
-{
-  Install_clock( Clock_isr );
- 
-  /*
-   * make major/minor avail to others such as shared memory driver
-   */
- 
-  rtems_clock_major = major;
-  rtems_clock_minor = minor;
- 
-  return RTEMS_SUCCESSFUL;
-}
- 
-rtems_device_driver Clock_control(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void *pargp
-)
-{
-    rtems_unsigned32 isrlevel;
-    rtems_libio_ioctl_args_t *args = pargp;
- 
-    if (args == 0)
-        goto done;
- 
-    /*
-     * This is hokey, but until we get a defined interface
-     * to do this, it will just be this simple...
-     */
- 
-    if (args->command == rtems_build_name('I', 'S', 'R', ' '))
-    {
-        Clock_isr(CLOCK_VECTOR);
-    }
-    else if (args->command == rtems_build_name('N', 'E', 'W', ' '))
-    {
-      rtems_interrupt_disable( isrlevel );
-       (void) set_vector( args->buffer, CLOCK_VECTOR, 1 );
-      rtems_interrupt_enable( isrlevel );
-    }
- 
-done:
-    return RTEMS_SUCCESSFUL;
-}