Remove (Abandoned).

1 files changed, 0 insertions, 153 deletions

diff --git a/c/src/lib/libbsp/i386/ts_386ex/clock/ckinit.c b/c/src/lib/libbsp/i386/ts_386ex/clock/ckinit.c
deleted file mode 100644
index 7527f90354..0000000000
--- a/c/src/lib/libbsp/i386/ts_386ex/clock/ckinit.c
+++ /dev/null
@@ -1,153 +0,0 @@
-/*  Clock_initialize
- *
- *  This routine initializes the Timer/Counter on the Intel
- *  386ex evaluation board.
- *
- *  The tick frequency is 1 millisecond.
- *
- *  Input parameters:  NONE
- *
- *  Output parameters:  NONE
- *
- *  COPYRIGHT (c) 1989-1999.
- *  On-Line Applications Research Corporation (OAR).
- *
- *  The license and distribution terms for this file may be
- *  found in the file LICENSE in this distribution or at
- *  http://www.rtems.com/license/LICENSE.
- *
- *  $Id$
- */
-
-#include <bsp.h>
-#include <bsp/irq.h>
-
-#include <stdlib.h>
-
-uint32_t         Clock_isrs;              /* ISRs until next tick */
-static uint32_t         Clock_initial_isr_value;
-
-volatile uint32_t         Clock_driver_ticks;
-
-extern void Clock_exit( void );
-
-/* External Prototypes */
-extern void init_rtc(void);                /* defined in 'rtc.c' */
-extern long rtc_read(rtems_time_of_day *); /* defined in 'rtc.c' */
-
-/*
- * These are set by clock driver during its init
- */
-
-rtems_device_major_number rtems_clock_major = ~0;
-rtems_device_major_number rtems_clock_minor = 0;
-
-/*
- *  This is the ISR handler.
- */
-
-void Clock_isr(rtems_irq_hdl_param unused)
-{
-  /* enable_tracing(); */
-  Clock_driver_ticks += 1;
-  if ( Clock_isrs == 1 ) {
-    rtems_clock_tick();
-    Clock_isrs = Clock_initial_isr_value; /* rtems_configuration_get_microseconds_per_tick() / 1000;*/
-  }
-  else
-    Clock_isrs -= 1;
-}
-
-void ClockOff(const rtems_irq_connect_data* unused)
-{
-  outport_byte (TIMER_CONFIG, 0x80 ); /* disable the counter timer */
-}
-
-void ClockOn(const rtems_irq_connect_data* unused)
-{
-  outport_byte (TIMER_CONFIG, 0x00 ); /* enable the counter timer */
-}
-
-int ClockIsOn(const rtems_irq_connect_data* unused)
-{
-  return ((i8259s_cache & 0x1) == 0);
-}
-
-static rtems_irq_connect_data clockIrqData = {BSP_PERIODIC_TIMER,
-					      Clock_isr,
-					      0,
-					      ClockOn,
-					      ClockOff,
-					      ClockIsOn};
-
-rtems_device_driver Clock_initialize(
-  rtems_device_major_number major,
-  rtems_device_minor_number minor,
-  void *pargp
-)
-{
-  unsigned timer_counter_init_value;
-  unsigned char clock_lsb, clock_msb;
-
-#ifdef BSP_DEBUG
-  printk("Initializing clock driver in Clock_initialize().\n");
-#endif
-
-#ifdef LOAD_RTC_AT_START
-  /* Initialize clock from on-board real time clock.  This breaks the  */
-  /* test code which assumes which assumes the application will do it. */
-  {
-    rtems_time_of_day now;
-
-
-#ifdef BSP_DEBUG
-    printk("Loading clock from on-board real-time clock.\n");
-#endif
-
-    init_rtc();
-    if (rtc_read(&now) >= 0)
-      rtems_clock_set(&now);
-  }
-#endif
-
-  Clock_driver_ticks = 0;
-
-  Clock_isrs =
-    Clock_initial_isr_value =
-    rtems_configuration_get_microseconds_per_tick() / 1000; /* ticks per clock_isr */
-
-  /*
-   * configure the counter timer ( should be based on microsecs/tick )
-   * NB. The divisor(Clock_isrs) resolves the  is the same number that appears in confdefs.h
-   * when setting the microseconds_per_tick value.
-   */
-  ClockOff      ( &clockIrqData );
-
-  timer_counter_init_value  =  rtems_configuration_get_microseconds_per_tick() / Clock_isrs;
-  clock_lsb = (unsigned char)timer_counter_init_value;
-  clock_msb = timer_counter_init_value >> 8;
-
-  outport_byte (TIMER_MODE, TIMER_SEL0|TIMER_16BIT|TIMER_RATEGEN);
-  outport_byte (TIMER_CNTR0, clock_lsb );   /* load LSB first */
-  outport_byte (TIMER_CNTR0, clock_msb );   /* then MSB       */
-
-  if (!BSP_install_rtems_irq_handler (&clockIrqData)) {
-    printk("Unable to initialize system clock\n");
-    rtems_fatal_error_occurred(1);
-  }
-
-  /*
-   * make major/minor avail to others such as shared memory driver
-   */
-
-  rtems_clock_major = major;
-  rtems_clock_minor = minor;
-
-  return RTEMS_SUCCESSFUL;
-}
-
-void Clock_exit(void)
-{
-  ClockOff(&clockIrqData);
-  BSP_remove_rtems_irq_handler (&clockIrqData);
-}