Renamed network to wd8003.

2 files changed, 0 insertions, 714 deletions

diff --git a/c/src/lib/libbsp/i386/pc386/network/Makefile.in b/c/src/lib/libbsp/i386/pc386/network/Makefile.in
deleted file mode 100644
index b3e294aae8..0000000000
--- a/c/src/lib/libbsp/i386/pc386/network/Makefile.in
+++ /dev/null
@@ -1,57 +0,0 @@
-#
-#  $Id$
-#
-
-@SET_MAKE@
-srcdir = @srcdir@
-VPATH = @srcdir@
-RTEMS_ROOT = @top_srcdir@
-PROJECT_ROOT = @PROJECT_ROOT@
-
-INSTALL = @INSTALL@
-
-PGM=${ARCH}/network.rel
-
-# C source names, if any, go here -- minus the .c
-C_PIECES=network
-C_FILES=$(C_PIECES:%=%.c)
-C_O_FILES=$(C_PIECES:%=${ARCH}/%.o)
-
-H_FILES=
-
-SRCS=$(C_FILES) $(H_FILES)
-OBJS=$(C_O_FILES)
-
-include $(RTEMS_ROOT)/make/custom/$(RTEMS_BSP).cfg
-include $(RTEMS_ROOT)/make/leaf.cfg
-
-#
-# (OPTIONAL) Add local stuff here using +=
-#
-
-DEFINES  += -D_COMPILING_BSD_KERNEL_ -DKERNEL -DINET -DNFS \
-     -DDIAGNOSTIC -DBOOTP_COMPAT
-CPPFLAGS +=
-CFLAGS   +=
-
-LD_PATHS  +=
-LD_LIBS   +=
-LDFLAGS   +=
-
-#
-# Add your list of files to delete here.  The config files
-#  already know how to delete some stuff, so you may want
-#  to just run 'make clean' first to see what gets missed.
-#  'make clobber' already includes 'make clean'
-#
-
-CLEAN_ADDITIONS +=
-CLOBBER_ADDITIONS +=
-
-${PGM}: ${SRCS} ${OBJS}
-	$(make-rel)
-
-all:	${ARCH} $(SRCS) $(PGM)
-
-# the .rel file built here will be put into libbsp.a by ../wrapup/Makefile
-install:  all
diff --git a/c/src/lib/libbsp/i386/pc386/network/network.c b/c/src/lib/libbsp/i386/pc386/network/network.c
deleted file mode 100644
index e897435f7a..0000000000
--- a/c/src/lib/libbsp/i386/pc386/network/network.c
+++ /dev/null
@@ -1,657 +0,0 @@
-/*
- * RTEMS driver for WD800x
- *
- *  Based on the 68360 Network Driver by:
- *    W. Eric Norum
- *    Saskatchewan Accelerator Laboratory
- *    University of Saskatchewan
- *    Saskatoon, Saskatchewan, CANADA
- *    eric@skatter.usask.ca
- *
- *  $Id$
- */
-
-#include <bsp.h>
-#include <wd80x3.h>
-
-#include <stdio.h>
-#include <stdarg.h>
-#include <rtems/error.h>
-#include <rtems/rtems_bsdnet.h>
-
-#include <sys/param.h>
-#include <sys/mbuf.h>
-#include <sys/socket.h>
-#include <sys/sockio.h>
-
-#include <net/if.h>
-
-#include <netinet/in.h>
-#include <netinet/if_ether.h>
-
-#include <irq.h>
-
-#define	ET_MINLEN 60		/* minimum message length */
-
-/*
- * Number of WDs supported by this driver
- */
-#define NWDDRIVER	1
-
-/*
- * Default number of buffer descriptors set aside for this driver.
- * The number of transmit buffer descriptors has to be quite large
- * since a single frame often uses four or more buffer descriptors.
- */
-#define RX_BUF_COUNT     15
-#define TX_BUF_COUNT     4
-#define TX_BD_PER_BUF    4
-
-/*
- * RTEMS event used by interrupt handler to signal driver tasks.
- * This must not be any of the events used by the network task synchronization.
- */
-#define INTERRUPT_EVENT	RTEMS_EVENT_1
-
-/*
- * RTEMS event used to start transmit daemon.
- * This must not be the same as INTERRUPT_EVENT.
- */
-#define START_TRANSMIT_EVENT	RTEMS_EVENT_2
-
-/*
- * Receive buffer size -- Allow for a full ethernet packet including CRC
- */
-#define RBUF_SIZE	1520
-
-#if (MCLBYTES < RBUF_SIZE)
-# error "Driver must have MCLBYTES > RBUF_SIZE"
-#endif
-
-/*
- * Per-device data
- */
-struct wd_softc {
-  struct arpcom			arpcom;
-  rtems_irq_connect_data	irqInfo;
-  struct mbuf			**rxMbuf;
-  struct mbuf			**txMbuf;
-  int				acceptBroadcast;
-  int				rxBdCount;
-  int				txBdCount;
-  int				txBdHead;
-  int				txBdTail;
-  int				txBdActiveCount;
-  rtems_id			rxDaemonTid;
-  rtems_id			txDaemonTid;
-
-  unsigned int 			port;
-  unsigned char			*base;
-  unsigned long			bpar;
-  
-  /*
-   * Statistics
-   */
-  unsigned long	rxInterrupts;
-  unsigned long	rxNotFirst;
-  unsigned long	rxNotLast;
-  unsigned long	rxGiant;
-  unsigned long	rxNonOctet;
-  unsigned long	rxRunt;
-  unsigned long	rxBadCRC;
-  unsigned long	rxOverrun;
-  unsigned long	rxCollision;
-  
-  unsigned long	txInterrupts;
-  unsigned long	txDeferred;
-  unsigned long	txHeartbeat;
-  unsigned long	txLateCollision;
-  unsigned long	txRetryLimit;
-  unsigned long	txUnderrun;
-  unsigned long	txLostCarrier;
-  unsigned long	txRawWait;
-};
-
-#define RO 0x10
-
-#define SHATOT (8*1024)		/* size of shared memory */
-#define SHAPAGE 256		/* shared memory information */
-#define MAXSIZ 	1536		/*(MAXBUF - MESSH_SZ)*/
-#define OUTPAGE ((SHATOT-(MAXSIZ+SHAPAGE-1))/SHAPAGE)
-
-static volatile unsigned long overrun;
-static volatile unsigned long resend;
-static struct wd_softc wd_softc[NWDDRIVER];
-
-/*
- * WD interrupt handler
- */
-static rtems_isr
-wd8003Enet_interrupt_handler (rtems_vector_number v)
-{
-  unsigned int tport;
-  unsigned char status, status2;
-
-  tport = wd_softc[0].port ;
-
-  /*
-   * Read status
-   */
-  inport_byte(tport+ISR, status);
-  outport_byte(tport+IMR, 0x00);
-
-  /*
-   * Ring overwrite
-   */
-
-  if (status & MSK_OVW){
-    outport_byte(tport+CMDR, MSK_STP + MSK_RD2);	/* stop 8390 */
-    Wait_X_ms(2);
-    outport_byte(tport+RBCR0, 0);			/* clear byte count */
-    outport_byte(tport+RBCR1, 0);
-    inport_byte(tport+ISR, status2);
-    status |= (status2 & (MSK_PTX+MSK_TXE)) ;	/* TX status */
-    outport_byte(tport+TCR, MSK_LOOP);		/* loopback mode */
-    outport_byte(tport+CMDR, MSK_STA + MSK_RD2);	/* start */
-    overrun = 1 ;
-    if ((status & (MSK_PTX+MSK_TXE)) == 0)
-	resend = 1;
-  }
-
-  /*
-   * Frame received?
-   */
-  if (status & (MSK_PRX+MSK_RXE)) {
-    outport_byte(tport+ISR, status & (MSK_PRX+MSK_RXE));
-    wd_softc[0].rxInterrupts++;
-    rtems_event_send (wd_softc[0].rxDaemonTid, INTERRUPT_EVENT);    
-  }
-
-}
-
-static void nopOn(const rtems_irq_connect_data* notUsed)
-{
-  /*
-   * code should be moved from wd8003Enet_initialize_hardware
-   * to this location
-   */
-}
-
-static int wdIsOn(const rtems_irq_connect_data* irq)
-{
-  return BSP_irq_enabled_at_i8259s (irq->name);
-}
-
-/*
- * Initialize the ethernet hardware
- */
-static void
-wd8003Enet_initialize_hardware (struct wd_softc *sc)
-{
-  int  i1, ultra;
-  char cc1, cc2;
-  unsigned char  temp;
-  rtems_status_code st;
-  unsigned int tport;
-  unsigned char *hwaddr;
-
-  tport = sc->port;
-
-  /* address from board ROM */
-  inport_byte(tport+0x04, temp);
-  outport_byte(tport+0x04, temp & 0x7f);
-
-  hwaddr = sc->arpcom.ac_enaddr;
-  for (i1=cc2=0; i1<8; i1++) {
-    inport_byte(tport + ADDROM + i1, cc1);
-    cc2 += cc1;
-    if (i1 < 6)
-      hwaddr[i1] = cc1;
-  }
-  
-  inport_byte(tport+0x04, temp); 
-  outport_byte(tport+0x04, temp | 0x80);	/* alternate registers */
-  outport_byte(tport+W83CREG, MSK_RESET);	/* reset board, set buffer */
-  outport_byte(tport+W83CREG, 0);
-  outport_byte(tport+W83CREG, MSK_ENASH + (int)((sc->bpar>>13)&0x3f));
-
-  outport_byte(tport+CMDR, MSK_PG0 + MSK_RD2);
-  cc1 = MSK_BMS + MSK_FT10; /* configure 8 or 16 bits */
-
-  inport_byte(tport+0x07, temp) ; 
-
-  ultra = ((temp & 0xf0) == 0x20 || (temp & 0xf0) == 0x40);
-  if (ultra)
-    cc1 = MSK_WTS + MSK_BMS + MSK_FT10;
-  outport_byte(tport+DCR, cc1);
-  outport_byte(tport+RBCR0, 0);
-  outport_byte(tport+RBCR1, 0);
-  outport_byte(tport+RCR, MSK_MON);	       	/* disable the rxer */
-  outport_byte(tport+TCR, 0);			/* normal operation */
-  outport_byte(tport+PSTOP, OUTPAGE);		/* init PSTOP */
-  outport_byte(tport+PSTART, 0);	       	/* init PSTART */
-  outport_byte(tport+BNRY, -1);			/* init BNRY */
-  outport_byte(tport+ISR, -1);			/* clear IR's */
-  outport_byte(tport+IMR, 0x15);	       	/* enable interrupt */
-
-  outport_byte(tport+CMDR, MSK_PG1 + MSK_RD2);
-
-  for (i1=0; i1<6; i1++)			/* initial physical addr */
-    outport_byte(tport+PAR+i1, hwaddr[i1]);
-
-  for (i1=0; i1<MARsize; i1++)			/* clear multicast */
-    outport_byte(tport+MAR+i1, 0);
-  outport_byte(tport+CURR, 0);			/* init current packet */
-
-  outport_byte(tport+CMDR, MSK_PG0 + MSK_RD2);
-  outport_byte(tport+CMDR, MSK_STA + MSK_RD2);	/* put 8390 on line */
-  outport_byte(tport+RCR, MSK_AB);		/* MSK_AB accept broadcast */
-  
-  if (ultra) {
-    inport_byte(tport+0x0c, temp);
-    outport_byte(tport+0x0c, temp | 0x80);
-    outport_byte(tport+0x05, 0x80);
-    outport_byte(tport+0x06, 0x01);
-  }
-  
-  /*
-   * Set up interrupts
-   */
-  sc->irqInfo.hdl = wd8003Enet_interrupt_handler;
-  sc->irqInfo.on  = nopOn;
-  sc->irqInfo.off = nopOn;
-  sc->irqInfo.isOn = wdIsOn;
-  
-  st = BSP_install_rtems_irq_handler (&sc->irqInfo);
-  if (!st)
-    rtems_panic ("Can't attach WD interrupt handler for irq %d\n",
-		  sc->irqInfo.name);
-}
-
-static void
-wd_rxDaemon (void *arg)
-{
-  unsigned int tport;
-  struct ether_header *eh;
-  struct wd_softc *dp = (struct wd_softc *)&wd_softc[0];
-  struct ifnet *ifp = &dp->arpcom.ac_if;
-  struct mbuf *m;
-  unsigned int i2;
-  unsigned int len;
-  volatile unsigned char start, next, current;
-  char *shp, *temp;
-  rtems_event_set events;
-
-  tport = wd_softc[0].port ;
-
-  for (;;){
-
-
-    rtems_bsdnet_event_receive (INTERRUPT_EVENT,
-				RTEMS_WAIT|RTEMS_EVENT_ANY,
-				RTEMS_NO_TIMEOUT,
-				&events);
-
-    for (;;){
-      inport_byte(tport+BNRY, start);
-
-      outport_byte(tport+CMDR, MSK_PG1 + MSK_RD2);
-      inport_byte(tport+CURR, current);
-      outport_byte(tport+CMDR, MSK_PG0 + MSK_RD2); 
-
-      start += 1;
-      if (start >= OUTPAGE){
-	start = 0;
-      }
-
-      if (current == start)
-	break;
-      
-      shp = dp->base + 1 + (SHAPAGE * start);
-      next = *shp++;
-      len = *((short *)shp)++ - 4;
-
-      if (next >= OUTPAGE){
-	next = 0;
-      }
-      
-      MGETHDR (m, M_WAIT, MT_DATA);
-      MCLGET (m, M_WAIT);
-      m->m_pkthdr.rcvif = ifp;
-      
-      temp = m->m_data;
-      m->m_len = m->m_pkthdr.len = len - sizeof(struct ether_header);
-      
-      if ((i2 = (OUTPAGE - start) * SHAPAGE - 4) < len){
-	memcpy(temp, shp, i2);
-	len -= i2;
-	temp += i2;
-	shp = dp->base;
-      }
-      memcpy(temp, shp, len);
-      
-      eh = mtod (m, struct ether_header *);
-      m->m_data += sizeof(struct ether_header);
-      ether_input (ifp, eh, m);
-      
-      outport_byte(tport+BNRY, next-1);
-    }
-    
-  /*
-   * Ring overwrite
-   */
-    if (overrun){     
-      outport_byte(tport+ISR, MSK_OVW);		/* reset IR */
-      outport_byte(tport+TCR, 0);		/* out of loopback */
-      if (resend  == 1)
-	outport_byte(tport+CMDR, MSK_TXP + MSK_RD2);	/* resend */
-      resend = 0;
-      overrun = 0;
-    }
-    
-    outport_byte(tport+IMR, 0x15);  /* re-enable IT rx */
-  }	
-}
-
-static void
-sendpacket (struct ifnet *ifp, struct mbuf *m)
-{
-	struct wd_softc *dp = ifp->if_softc;
-	struct mbuf *n;
-	unsigned int len, tport;
-	char *shp, txReady;
-
-	tport = dp->port;
-
-  /*
-   * Waiting for Transmitter ready
-   */	
-  inport_byte(tport+CMDR, txReady); 
-  while(txReady & MSK_TXP)
-    inport_byte(tport+CMDR, txReady); 
-
-  len = 0;
-  shp = dp->base + (SHAPAGE * OUTPAGE);
-
-  n = m;
-  
-  for (;;){
-    len += m->m_len;
-    memcpy(shp, (char *)m->m_data, m->m_len);
-    shp += m->m_len ;
-    if ((m = m->m_next) == NULL)
-      break;
-  }
-
-  m_freem(n);
-  
-  if (len < ET_MINLEN) len = ET_MINLEN;
-  outport_byte(tport+TBCR0, len);
-  outport_byte(tport+TBCR1, (len >> 8) );
-  outport_byte(tport+TPSR, OUTPAGE);
-  outport_byte(tport+CMDR, MSK_TXP + MSK_RD2);
-}
-
-/*
- * Driver transmit daemon
- */
-void
-wd_txDaemon (void *arg)
-{
-	struct wd_softc *sc = (struct wd_softc *)arg;
-	struct ifnet *ifp = &sc->arpcom.ac_if;
-	struct mbuf *m;
-	rtems_event_set events;
-
-	for (;;) {
-		/*
-		 * Wait for packet
-		 */
-		rtems_bsdnet_event_receive (START_TRANSMIT_EVENT, RTEMS_EVENT_ANY | RTEMS_WAIT, RTEMS_NO_TIMEOUT, &events);
-
-		/*
-		 * Send packets till queue is empty
-		 */
-		for (;;) {
-			/*
-			 * Get the next mbuf chain to transmit.
-			 */
-			IF_DEQUEUE(&ifp->if_snd, m);
-			if (!m)
-				break;
-			sendpacket (ifp, m);
-		}
-		ifp->if_flags &= ~IFF_OACTIVE;
-	}
-}
-
-/*
- * Send packet (caller provides header).
- */
-static void
-wd_start (struct ifnet *ifp)
-{
-	struct wd_softc *sc = ifp->if_softc;
-
-	rtems_event_send (sc->txDaemonTid, START_TRANSMIT_EVENT);
-	ifp->if_flags |= IFF_OACTIVE;
-}
-
-/*
- * Initialize and start the device
- */
-static void
-wd_init (void *arg)
-{
-  struct wd_softc *sc = arg;
-  struct ifnet *ifp = &sc->arpcom.ac_if;
-
-  if (sc->txDaemonTid == 0) {
-    
-    /*
-     * Set up WD hardware
-     */
-    wd8003Enet_initialize_hardware (sc);
-    
-    /*
-     * Start driver tasks
-     */
-    sc->txDaemonTid = rtems_bsdnet_newproc ("SCtx", 4096, wd_txDaemon, sc);
-    sc->rxDaemonTid = rtems_bsdnet_newproc ("SCrx", 4096, wd_rxDaemon, sc);
-  }
-
-  /*
-   * Tell the world that we're running.
-   */
-  ifp->if_flags |= IFF_RUNNING;
-
-}
-
-/*
- * Stop the device
- */
-static void
-wd_stop (struct wd_softc *sc)
-{
-  unsigned int tport;
-  unsigned char temp;
-  struct ifnet *ifp = &sc->arpcom.ac_if;
-
-  ifp->if_flags &= ~IFF_RUNNING;
-
-  /*
-   * Stop the transmitter
-   */
-  tport=wd_softc[0].port ;
-  inport_byte(tport+0x04,temp);
-  outport_byte(tport+0x04, temp & 0x7f);
-  outport_byte(tport + CMDR, MSK_STP + MSK_RD2);
-
-}
-
-
-/*
- * Show interface statistics
- */
-static void
-wd_stats (struct wd_softc *sc)
-{
-	printf ("      Rx Interrupts:%-8lu", sc->rxInterrupts);
-	printf ("       Not First:%-8lu", sc->rxNotFirst);
-	printf ("        Not Last:%-8lu\n", sc->rxNotLast);
-	printf ("              Giant:%-8lu", sc->rxGiant);
-	printf ("            Runt:%-8lu", sc->rxRunt);
-	printf ("       Non-octet:%-8lu\n", sc->rxNonOctet);
-	printf ("            Bad CRC:%-8lu", sc->rxBadCRC);
-	printf ("         Overrun:%-8lu", sc->rxOverrun);
-	printf ("       Collision:%-8lu\n", sc->rxCollision);
-
-	printf ("      Tx Interrupts:%-8lu", sc->txInterrupts);
-	printf ("        Deferred:%-8lu", sc->txDeferred);
-	printf (" Missed Hearbeat:%-8lu\n", sc->txHeartbeat);
-	printf ("         No Carrier:%-8lu", sc->txLostCarrier);
-	printf ("Retransmit Limit:%-8lu", sc->txRetryLimit);
-	printf ("  Late Collision:%-8lu\n", sc->txLateCollision);
-	printf ("           Underrun:%-8lu", sc->txUnderrun);
-	printf (" Raw output wait:%-8lu\n", sc->txRawWait);
-}
-
-/*
- * Driver ioctl handler
- */
-static int
-wd_ioctl (struct ifnet *ifp, int command, caddr_t data)
-{
-	struct wd_softc *sc = ifp->if_softc;
-	int error = 0;
-
-	switch (command) {
-	case SIOCGIFADDR:
-	case SIOCSIFADDR:
-		ether_ioctl (ifp, command, data);
-		break;
-
-	case SIOCSIFFLAGS:
-		switch (ifp->if_flags & (IFF_UP | IFF_RUNNING)) {
-		case IFF_RUNNING:
-			wd_stop (sc);
-			break;
-
-		case IFF_UP:
-			wd_init (sc);
-			break;
-
-		case IFF_UP | IFF_RUNNING:
-			wd_stop (sc);
-			wd_init (sc);
-			break;
-
-		default:
-			break;
-		}
-		break;
-
-	case SIO_RTEMS_SHOW_STATS:
-		wd_stats (sc);
-		break;
-		
-	/*
-	 * FIXME: All sorts of multicast commands need to be added here!
-	 */
-	default:
-		error = EINVAL;
-		break;
-	}
-	return error;
-}
-
-/*
- * Attach an WD driver to the system
- */
-int
-rtems_wd_driver_attach (struct rtems_bsdnet_ifconfig *config)
-{
-	struct wd_softc *sc;
-	struct ifnet *ifp;
-	int mtu;
-	int i;
-
-	/*
-	 * Find a free driver
-	 */
-	for (i = 0 ; i < NWDDRIVER ; i++) {
-		sc = &wd_softc[i];
-		ifp = &sc->arpcom.ac_if;
-		if (ifp->if_softc == NULL)
-			break;
-	}
-	if (i >= NWDDRIVER) {
-		printf ("Too many WD drivers.\n");
-		return 0;
-	}
-
-	/*
-	 * Process options
-	 */
-	if (config->hardware_address) {
-	  memcpy (sc->arpcom.ac_enaddr, config->hardware_address,
-		  ETHER_ADDR_LEN);
-	}
-	else {
-	  memset (sc->arpcom.ac_enaddr, 0x08,ETHER_ADDR_LEN);
-	}
-	if (config->mtu)
-		mtu = config->mtu;
-	else
-		mtu = ETHERMTU;
-
-
-	if (config->irno)
-		sc->irqInfo.name = config->irno;
-	else
-		sc->irqInfo.name = 5;
-
-	if (config->port)
-		sc->port = config->port;
-	else
-		sc->port = 0x240;
-
-	if (config->bpar) {
-		sc->bpar = config->bpar;
-		sc->base = (unsigned char*) config->bpar;
-	}
-	else {
-		sc->bpar = 0xD0000;
-		sc->base = (unsigned char*) 0xD0000;
-	}
-	
-	sc->acceptBroadcast = !config->ignore_broadcast;
-
-	/*
-	 * Set up network interface values
-	 */
-	ifp->if_softc = sc;
-	ifp->if_unit = i + 1;
-	ifp->if_name = "wd";
-	ifp->if_mtu = mtu;
-	ifp->if_init = wd_init;
-	ifp->if_ioctl = wd_ioctl;
-	ifp->if_start = wd_start;
-	ifp->if_output = ether_output;
-	ifp->if_flags = IFF_BROADCAST | IFF_SIMPLEX;
-	if (ifp->if_snd.ifq_maxlen == 0)
-		ifp->if_snd.ifq_maxlen = ifqmaxlen;
-
-	/*
-	 * init some variables
-	 */
-	overrun = 0;
-	resend = 0;
-
- 	/*
-	 * Attach the interface
-	 */
-	if_attach (ifp);
-	ether_ifattach (ifp);
-	return 1;
-};