2006-10-23 Joel Sherrill <joel@OARcorp.com>

	* bfin/ChangeLog, bfin/Makefile.am, bfin/acinclude.m4,
	bfin/configure.ac, bfin/eZKit533/.cvsignore, bfin/eZKit533/ChangeLog,
	bfin/eZKit533/Makefile.am, bfin/eZKit533/README,
	bfin/eZKit533/bsp_specs, bfin/eZKit533/configure,
	bfin/eZKit533/configure.ac, bfin/eZKit533/preinstall.am,
	bfin/eZKit533/times, bfin/eZKit533/console/console-io.c,
	bfin/eZKit533/include/.cvsignore, bfin/eZKit533/include/bsp.h,
	bfin/eZKit533/include/bspopts.h.in, bfin/eZKit533/include/coverhd.h,
	bfin/eZKit533/include/tm27.h, bfin/eZKit533/startup/bspstart.c,
	bfin/eZKit533/startup/linkcmds, bfin/shared/clock/clockdrv.c,
	bfin/shared/clock/rtc.c, bfin/shared/clock/tod.h,
	bfin/shared/console/console.c, bfin/shared/start/start.S,
	bfin/shared/timer/timer.c: New files.

1 files changed, 152 insertions, 0 deletions

diff --git a/c/src/lib/libbsp/bfin/eZKit533/include/bsp.h b/c/src/lib/libbsp/bfin/eZKit533/include/bsp.h
new file mode 100644
index 0000000000..7816621ff3
--- /dev/null
+++ b/c/src/lib/libbsp/bfin/eZKit533/include/bsp.h
@@ -0,0 +1,152 @@
+/*  bsp.h
+ *  
+ *  This include file contains all board IO definitions for eZKit533.
+ *
+ *  Copyright (c) 2006 by Atos Automacao Industrial Ltda.
+ *             written by Alain Schaefer <alain.schaefer@easc.ch>
+ *                    and Antonio Giovanini <antonio@atos.com.br>
+ *
+ *  The license and distribution terms for this file may be
+ *  found in the file LICENSE in this distribution or at
+ *  http://www.rtems.com/license/LICENSE.
+ *
+ *  $Id$
+ */
+ 
+
+#ifndef _BSP_H
+#define _BSP_H
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+#include <bspopts.h>
+
+#include <rtems.h>
+#include <rtems/console.h>
+#include <rtems/clockdrv.h>
+#include <rtems/score/bfin.h> 
+
+
+#define CLOCK_DRIVER_USE_FAST_IDLE
+
+/* 
+ * PLL and clock setup values:
+ */
+
+/*
+ *  PLL configuration for ezkit533
+ *
+ *  XTL   =  27 MHz
+ *  CLKIN =  13 MHz
+ *  VCO   = 391 MHz
+ *  CCLK  = 391 MHz
+ *  SCLK  = 130 MHz
+ */
+
+#define PLL_CSEL    0x0000      /* CCLK = VCO      */
+#define PLL_SSEL    0x0003      /* SCLK = CCLK/3   */
+#define PLL_MSEL    0x3A00      /* VCO = 29xCLKIN  */
+#define PLL_DF      0x0001      /* CLKIN = XTL/2   */
+
+#define CCLK        391000000   /* CORE CLOCK     */
+#define SCLK        130000000   /* SYSTEM CLOCK   */
+
+/*
+ * UART setup values
+ */
+#define BAUDRATE    57600       /* Console Baudrate   */
+#define WORD_5BITS  0x00        /* 5 bits word        */
+#define WORD_6BITS  0x01        /* 6 bits word        */
+#define WORD_7BITS  0x02        /* 7 bits word        */
+#define WORD_8BITS  0x03        /* 8 bits word        */
+#define EVEN_PARITY 0x18        /* Enable EVEN parity */
+#define ODD_PARITY  0x08        /* Enable ODD parity  */
+#define TWO_STP_BIT 0x04        /* 2 stop bits        */
+
+/*
+ * Ezkit flash ports
+ */
+#define FlashA_PortB_Dir  0x20270007
+#define FlashA_PortB_Data 0x20270005
+
+// Blackfin environment memory map
+//
+#define L1_DATA_SRAM_A 0xff800000
+
+#define FIFOLENGTH 0x100
+
+#ifndef LO
+#define LO(con32) ((con32) & 0xFFFF)
+#endif
+#ifndef HI
+#define HI(con32) (((con32) >> 16) & 0xFFFF)
+#endif
+
+
+/*
+ *  confdefs.h overrides for this BSP:
+ *   - number of termios serial ports (defaults to 1)
+ *   - Interrupt stack space is not minimum if defined.
+ */
+
+/* #define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2 */
+#define CONFIGURE_INTERRUPT_STACK_MEMORY  (4 * 1024)
+
+/*
+ *  Simple spin delay in microsecond units for device drivers.
+ *  This is very dependent on the clock speed of the target.
+ */
+
+#define rtems_bsp_delay( microseconds ) \
+  { \
+  }
+
+/* Constants */
+
+#define RAM_START 0
+#define RAM_END   0x100000
+
+/* miscellaneous stuff assumed to exist */
+
+extern rtems_configuration_table BSP_Configuration;
+
+/*
+ *  Device Driver Table Entries
+ */
+
+/*
+ * NOTE: Use the standard Console driver entry
+ */
+
+/*
+ * NOTE: Use the standard Clock driver entry
+ */
+
+/* functions */
+
+/*
+ * Helper Function to use the EzKits LEDS.
+ * Can be used by the Application.
+ */
+void setLED (char value);
+
+/*
+ * Helper Function to use the EzKits LEDS
+ */
+char getLED (void);
+
+void bsp_cleanup( void );
+
+rtems_isr_entry set_vector(                    /* returns old vector */
+  rtems_isr_entry     handler,                  /* isr routine        */
+  rtems_vector_number vector,                   /* vector number      */
+  int                 type                      /* RTEMS or RAW intr  */
+);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif