bsp/tms570: Move more start to bsps

This patch is a part of the BSP source reorganization.

Update #3285.

1 files changed, 0 insertions, 90 deletions

diff --git a/c/src/lib/libbsp/arm/tms570/hwinit/tms570_selftest_par_std.c b/c/src/lib/libbsp/arm/tms570/hwinit/tms570_selftest_par_std.c
deleted file mode 100644
index a9b20b5cb7..0000000000
--- a/c/src/lib/libbsp/arm/tms570/hwinit/tms570_selftest_par_std.c
+++ /dev/null
@@ -1,90 +0,0 @@
-/**
- * @file tms570_selftest_par_std.c
- *
- * @ingroup tms570
- *
- * @brief Generic parity based protection logic check applicable to HETx, HTUx, ADC, DMA and VIM.
- */
-/*
- * Copyright (c) 2016 Pavel Pisa <pisa@cmp.felk.cvut.cz>
- *
- * Czech Technical University in Prague
- * Zikova 1903/4
- * 166 36 Praha 6
- * Czech Republic
- *
- * The license and distribution terms for this file may be
- * found in the file LICENSE in this distribution or at
- * http://www.rtems.org/license/LICENSE.
- *
- * Algorithms are based on Ti manuals and Ti HalCoGen generated
- * code.
- */
-
-#include <stdint.h>
-#include <stddef.h>
-#include <bsp/tms570.h>
-#include "tms570_selftest.h"
-#include "tms570_selftest_parity.h"
-
-/**
- * @brief run test to check that parity protection works for modules with common setup structure.
- *
- * @param[in] desc module registers addresses end ESM channels descriptor
- *
- * @return Void, in the case of error invokes bsp_selftest_fail_notification()
- *
- * The descriptor provides address of the module registers and address
- * of internal RAM memory and corresponding parity area test access window.
- * This test function is usable for HETx, HTUx, ADC, DMA and VIM TMS570
- * peripherals.
- */
-void tms570_selftest_par_check_std( const tms570_selftest_par_desc_t *desc )
-{
-  volatile uint32_t test_read_data;
-  uint32_t          par_cr_bak = *desc->par_cr_reg;
-  int               perr;
-
-  /* Set TEST mode and enable parity checking */
-  *desc->par_cr_reg = desc->par_cr_test | TMS570_SELFTEST_PAR_CR_KEY;
-
-  /* flip parity bit */
-  *desc->par_loc ^= desc->par_xor;
-
-  /* Disable TEST mode */
-  *desc->par_cr_reg = TMS570_SELFTEST_PAR_CR_KEY;
-
-  /* read to cause parity error */
-  test_read_data = *desc->ram_loc;
-  (void) test_read_data;
-
-  /* check if ESM channel is flagged */
-  perr = tms570_esm_channel_sr_get( desc->esm_prim_grp, desc->esm_prim_chan );
-
-  if ( desc->esm_sec_grp )
-    perr |= tms570_esm_channel_sr_get( desc->esm_sec_grp, desc->esm_sec_chan );
-
-  if ( !perr ) {
-    /* RAM parity error was not flagged to ESM. */
-    bsp_selftest_fail_notification( desc->fail_code );
-  } else {
-    /* If periperal has it own parity status register, clear it */
-    if ( desc->par_st_reg != NULL )
-      *desc->par_st_reg = desc->par_st_clear;
-
-    /* clear ESM flag */
-    tms570_esm_channel_sr_clear( desc->esm_prim_grp, desc->esm_prim_chan );
-
-    if ( desc->esm_sec_grp )
-      tms570_esm_channel_sr_clear( desc->esm_sec_grp, desc->esm_sec_chan );
-
-    /* Set TEST mode and enable parity checking */
-    *desc->par_cr_reg = desc->par_cr_test | TMS570_SELFTEST_PAR_CR_KEY;
-
-    /* Revert back to correct data by flipping parity location */
-    *desc->par_loc ^= desc->par_xor;
-  }
-
-  /* Restore Parity comtrol register */
-  *desc->par_cr_reg = par_cr_bak;
-}