2011-08-01 Sebastian Huber <sebastian.huber@embedded-brains.de>

	* include/.cvsignore: New file.
	* include/bspopts.h.in: Removed file.

3 files changed, 9 insertions, 106 deletions

diff --git a/c/src/lib/libbsp/arm/lpc32xx/ChangeLog b/c/src/lib/libbsp/arm/lpc32xx/ChangeLog
index f1255235bb..8085c25fbb 100644
--- a/c/src/lib/libbsp/arm/lpc32xx/ChangeLog
+++ b/c/src/lib/libbsp/arm/lpc32xx/ChangeLog
@@ -1,3 +1,8 @@
+2011-08-01	Sebastian Huber <sebastian.huber@embedded-brains.de>
+
+	* include/.cvsignore: New file.
+	* include/bspopts.h.in: Removed file.
+
 2011-07-04	Sebastian Huber <sebastian.huber@embedded-brains.de>
 
 	* misc/nand-mlc-erase-block-safe.c, misc/nand-mlc-write-blocks.c,
diff --git a/c/src/lib/libbsp/arm/lpc32xx/include/.cvsignore b/c/src/lib/libbsp/arm/lpc32xx/include/.cvsignore
new file mode 100644
index 0000000000..a83132db41
--- /dev/null
+++ b/c/src/lib/libbsp/arm/lpc32xx/include/.cvsignore
@@ -0,0 +1,4 @@
+stamp-h
+stamp-h.in
+bspopts.h
+bspopts.h.in
diff --git a/c/src/lib/libbsp/arm/lpc32xx/include/bspopts.h.in b/c/src/lib/libbsp/arm/lpc32xx/include/bspopts.h.in
deleted file mode 100644
index 849aaa27f1..0000000000
--- a/c/src/lib/libbsp/arm/lpc32xx/include/bspopts.h.in
+++ /dev/null
@@ -1,106 +0,0 @@
-/* include/bspopts.h.in.  Generated from configure.ac by autoheader.  */
-
-/* If defined, then the BSP Framework will put a non-zero pattern into the
-   RTEMS Workspace and C program heap. This should assist in finding code that
-   assumes memory starts set to zero. */
-#undef BSP_DIRTY_MEMORY
-
-/* If defined, print a message and wait until pressed before resetting board
-   when application exits. */
-#undef BSP_PRESS_KEY_FOR_RESET
-
-/* If defined, reset the board when the application exits. */
-#undef BSP_RESET_BOARD_AT_EXIT
-
-/* disable testsuite samples with high memory demands */
-#undef BSP_SMALL_MEMORY
-
-/* reset vector address for BSP start */
-#undef BSP_START_RESET_VECTOR
-
-/* ARM clock in Hz */
-#undef LPC32XX_ARM_CLK
-
-/* clock configuration for UART 3 */
-#undef LPC32XX_CONFIG_U3CLK
-
-/* clock configuration for UART 4 */
-#undef LPC32XX_CONFIG_U4CLK
-
-/* clock configuration for UART 5 */
-#undef LPC32XX_CONFIG_U5CLK
-
-/* clock configuration for UART 6 */
-#undef LPC32XX_CONFIG_U6CLK
-
-/* clock mode configuration for UARTs */
-#undef LPC32XX_CONFIG_UART_CLKMODE
-
-/* disable MMU */
-#undef LPC32XX_DISABLE_MMU
-
-/* disable MMU protection of read-only sections */
-#undef LPC32XX_DISABLE_READ_ONLY_PROTECTION
-
-/* disable cache for read-write data sections */
-#undef LPC32XX_DISABLE_READ_WRITE_DATA_CACHE
-
-/* bsp_reset() will use the watchdog to reset the chip */
-#undef LPC32XX_ENABLE_WATCHDOG_RESET
-
-/* enable RMII for Ethernet */
-#undef LPC32XX_ETHERNET_RMII
-
-/* AHB bus clock in Hz */
-#undef LPC32XX_HCLK
-
-/* main oscillator frequency in Hz */
-#undef LPC32XX_OSCILLATOR_MAIN
-
-/* RTC oscillator frequency in Hz */
-#undef LPC32XX_OSCILLATOR_RTC
-
-/* peripheral clock in Hz */
-#undef LPC32XX_PERIPH_CLK
-
-/* size of scratch area */
-#undef LPC32XX_SCRATCH_AREA_SIZE
-
-/* stop Ethernet controller at start-up to avoid DMA interference */
-#undef LPC32XX_STOP_ETHERNET
-
-/* stop general purpose DMA at start-up to avoid DMA interference */
-#undef LPC32XX_STOP_GPDMA
-
-/* stop USB controller at start-up to avoid DMA interference */
-#undef LPC32XX_STOP_USB
-
-/* baud for UART 1 */
-#undef LPC32XX_UART_1_BAUD
-
-/* baud for UART 2 */
-#undef LPC32XX_UART_2_BAUD
-
-/* baud for UART 7 */
-#undef LPC32XX_UART_7_BAUD
-
-/* Define to the address where bug reports for this package should be sent. */
-#undef PACKAGE_BUGREPORT
-
-/* Define to the full name of this package. */
-#undef PACKAGE_NAME
-
-/* Define to the full name and version of this package. */
-#undef PACKAGE_STRING
-
-/* Define to the one symbol short name of this package. */
-#undef PACKAGE_TARNAME
-
-/* Define to the home page for this package. */
-#undef PACKAGE_URL
-
-/* Define to the version of this package. */
-#undef PACKAGE_VERSION
-
-/* tests use printk() for output */
-#undef TESTS_USE_PRINTK