Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step.  It
copied header files from arbitrary locations into the build tree.  The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

* The make preinstall step itself needs time and disk space.

* Errors in header files show up in the build tree copy.  This makes it
  hard for editors to open the right file to fix the error.

* There is no clear relationship between source and build tree header
  files.  This makes an audit of the build process difficult.

* The visibility of all header files in the build tree makes it
  difficult to enforce API barriers.  For example it is discouraged to
  use BSP-specifics in the cpukit.

* An introduction of a new build system is difficult.

* Include paths specified by the -B option are system headers.  This
  may suppress warnings.

* The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step.   All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc.  Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

* cpukit/include

* cpukit/score/cpu/@RTEMS_CPU@/include

* cpukit/libnetworking

The new BSP include directories are:

* bsps/include

* bsps/@RTEMS_CPU@/include

* bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed.  The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

1 files changed, 47 insertions, 0 deletions

diff --git a/bsps/sparc/include/bsp/network_interface_add.h b/bsps/sparc/include/bsp/network_interface_add.h
new file mode 100644
index 0000000000..b04a96f003
--- /dev/null
+++ b/bsps/sparc/include/bsp/network_interface_add.h
@@ -0,0 +1,47 @@
+/*  Network interface register help function
+ * 
+ *  COPYRIGHT (c) 2008.
+ *  Cobham Gaisler AB.
+ *
+ *  This function adds a network interface to the 
+ *  rtems_bsdnet_config.ifconfig linked list of interfaces.
+ *  The interface configuration is taken from the user defined
+ *  array interface_configs. This function is useful for PnP
+ *  systems when an unknown number of interfaces are available.
+ *
+ *  The license and distribution terms for this file may be
+ *  found in found in the file LICENSE in this distribution or at
+ *  http://www.rtems.org/license/LICENSE.
+ */
+
+#ifndef __NETWORK_INTERFACE_ADD_H__
+#define __NETWORK_INTERFACE_ADD_H__
+
+#include <rtems/rtems_bsdnet.h>
+
+#ifdef __cplusplus
+extern "C" {
+#endif
+
+/* Interface configuration description */
+struct ethernet_config {
+	char	*ip_addr;	/* IP address */
+	char	*ip_netmask;	/* IP Netmask */
+	char	eth_adr[6];	/* Ethernet hardware MAC address */
+};
+
+/* Array with configurations for all interfaces in the system
+ * Must be defined by the user.
+ */
+extern struct ethernet_config interface_configs[];
+
+/* Routine adding interface to rtems_bsdnet_config.ifconfig linked 
+ * list of interfaces.
+ */
+int network_interface_add(struct rtems_bsdnet_ifconfig *interface);
+
+#ifdef __cplusplus
+}
+#endif
+
+#endif /* _RTEMS_NETWORKCONFIG_H_ */