bsps: Move zynq-uart to bsps/shared

This moves the zynq-uart driver from bsps/arm/shared to bsps/shared to
accomodate use by AArch64 BSPs.

1 files changed, 177 insertions, 0 deletions

diff --git a/bsps/shared/dev/serial/zynq-uart.c b/bsps/shared/dev/serial/zynq-uart.c
new file mode 100644
index 0000000000..41adb196ab
--- /dev/null
+++ b/bsps/shared/dev/serial/zynq-uart.c
@@ -0,0 +1,177 @@
+/*
+ * SPDX-License-Identifier: BSD-2-Clause
+ *
+ * Copyright (C) 2013, 2017 embedded brains GmbH
+ *
+ * Redistribution and use in source and binary forms, with or without
+ * modification, are permitted provided that the following conditions
+ * are met:
+ * 1. Redistributions of source code must retain the above copyright
+ *    notice, this list of conditions and the following disclaimer.
+ * 2. Redistributions in binary form must reproduce the above copyright
+ *    notice, this list of conditions and the following disclaimer in the
+ *    documentation and/or other materials provided with the distribution.
+ *
+ * THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
+ * AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
+ * IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
+ * ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
+ * LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
+ * CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
+ * SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
+ * INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
+ * CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
+ * ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
+ * POSSIBILITY OF SUCH DAMAGE.
+ */
+
+#include <dev/serial/zynq-uart.h>
+#include <dev/serial/zynq-uart-regs.h>
+#include <bsp/irq.h>
+
+#include <bspopts.h>
+
+#ifdef ZYNQ_CONSOLE_USE_INTERRUPTS
+static void zynq_uart_interrupt(void *arg)
+{
+  rtems_termios_tty *tty = arg;
+  zynq_uart_context *ctx = rtems_termios_get_device_context(tty);
+  volatile zynq_uart *regs = ctx->regs;
+  uint32_t channel_sts;
+
+  if ((regs->irq_sts & (ZYNQ_UART_TIMEOUT | ZYNQ_UART_RTRIG)) != 0) {
+    regs->irq_sts = ZYNQ_UART_TIMEOUT | ZYNQ_UART_RTRIG;
+
+    do {
+      char c = (char) ZYNQ_UART_TX_RX_FIFO_FIFO_GET(regs->tx_rx_fifo);
+
+      rtems_termios_enqueue_raw_characters(tty, &c, 1);
+
+      channel_sts = regs->channel_sts;
+    } while ((channel_sts & ZYNQ_UART_CHANNEL_STS_REMPTY) == 0);
+  } else {
+    channel_sts = regs->channel_sts;
+  }
+
+  if (ctx->transmitting && (channel_sts & ZYNQ_UART_CHANNEL_STS_TEMPTY) != 0) {
+    rtems_termios_dequeue_characters(tty, 1);
+  }
+}
+#endif
+
+static bool zynq_uart_first_open(
+  rtems_termios_tty *tty,
+  rtems_termios_device_context *base,
+  struct termios *term,
+  rtems_libio_open_close_args_t *args
+)
+{
+#ifdef ZYNQ_CONSOLE_USE_INTERRUPTS
+  zynq_uart_context *ctx = (zynq_uart_context *) base;
+  volatile zynq_uart *regs = ctx->regs;
+  rtems_status_code sc;
+#endif
+
+  rtems_termios_set_initial_baud(tty, ZYNQ_UART_DEFAULT_BAUD);
+  zynq_uart_initialize(base);
+
+#ifdef ZYNQ_CONSOLE_USE_INTERRUPTS
+  regs->rx_timeout = 32;
+  regs->rx_fifo_trg_lvl = ZYNQ_UART_FIFO_DEPTH / 2;
+  regs->irq_dis = 0xffffffff;
+  regs->irq_sts = 0xffffffff;
+  regs->irq_en = ZYNQ_UART_RTRIG | ZYNQ_UART_TIMEOUT;
+  sc = rtems_interrupt_handler_install(
+    ctx->irq,
+    "UART",
+    RTEMS_INTERRUPT_SHARED,
+    zynq_uart_interrupt,
+    tty
+  );
+  if (sc != RTEMS_SUCCESSFUL) {
+    return false;
+  }
+#endif
+
+  return true;
+}
+
+#ifdef ZYNQ_CONSOLE_USE_INTERRUPTS
+static void zynq_uart_last_close(
+  rtems_termios_tty *tty,
+  rtems_termios_device_context *base,
+  rtems_libio_open_close_args_t *args
+)
+{
+  zynq_uart_context *ctx = (zynq_uart_context *) base;
+
+  rtems_interrupt_handler_remove(ctx->irq, zynq_uart_interrupt, tty);
+}
+#endif
+
+static void zynq_uart_write_support(
+  rtems_termios_device_context *base,
+  const char *buf,
+  size_t len
+)
+{
+#ifdef ZYNQ_CONSOLE_USE_INTERRUPTS
+  zynq_uart_context *ctx = (zynq_uart_context *) base;
+  volatile zynq_uart *regs = ctx->regs;
+
+  if (len > 0) {
+    ctx->transmitting = true;
+    regs->irq_sts = ZYNQ_UART_TEMPTY;
+    regs->irq_en = ZYNQ_UART_TEMPTY;
+    regs->tx_rx_fifo = ZYNQ_UART_TX_RX_FIFO_FIFO(buf[0]);
+  } else {
+    ctx->transmitting = false;
+    regs->irq_dis = ZYNQ_UART_TEMPTY;
+  }
+#else
+  ssize_t i;
+
+  for (i = 0; i < len; ++i) {
+    zynq_uart_write_polled(base, buf[i]);
+  }
+#endif
+}
+
+static bool zynq_uart_set_attributes(
+  rtems_termios_device_context *context,
+  const struct termios *term
+)
+{
+#if 0
+  volatile zynq_uart *regs = zynq_uart_get_regs(minor);
+  uint32_t brgr = 0;
+  uint32_t bauddiv = 0;
+  int rc;
+
+  rc = zynq_cal_baud_rate(115200, &brgr, &bauddiv, regs->mode);
+  if (rc != 0)
+    return rc;
+
+  regs->control &= ~(ZYNQ_UART_CONTROL_RXEN | ZYNQ_UART_CONTROL_TXEN);
+  regs->baud_rate_gen = ZYNQ_UART_BAUD_RATE_GEN_CD(brgr);
+  regs->baud_rate_div = ZYNQ_UART_BAUD_RATE_DIV_BDIV(bauddiv);
+  regs->control |= ZYNQ_UART_CONTROL_RXEN | ZYNQ_UART_CONTROL_TXEN;
+
+  return true;
+#else
+  return false;
+#endif
+}
+
+const rtems_termios_device_handler zynq_uart_handler = {
+  .first_open = zynq_uart_first_open,
+  .set_attributes = zynq_uart_set_attributes,
+  .write = zynq_uart_write_support,
+#ifdef ZYNQ_CONSOLE_USE_INTERRUPTS
+  .last_close = zynq_uart_last_close,
+  .mode = TERMIOS_IRQ_DRIVEN
+#else
+  .poll_read = zynq_uart_read_polled,
+  .mode = TERMIOS_POLLED
+#endif
+};