bsps/powerpc, bsps/shared: Move remaining legacy networking header files

4 files changed, 0 insertions, 481 deletions

diff --git a/bsps/powerpc/beatnik/headers.am b/bsps/powerpc/beatnik/headers.am
index 36df3cd759..364ea222a8 100644
--- a/bsps/powerpc/beatnik/headers.am
+++ b/bsps/powerpc/beatnik/headers.am
@@ -16,7 +16,4 @@ include_bsp_HEADERS += ../../../../../../bsps/powerpc/beatnik/include/bsp/gti2cr
 include_bsp_HEADERS += ../../../../../../bsps/powerpc/beatnik/include/bsp/gtintrreg.h
 include_bsp_HEADERS += ../../../../../../bsps/powerpc/beatnik/include/bsp/gtpcireg.h
 include_bsp_HEADERS += ../../../../../../bsps/powerpc/beatnik/include/bsp/gtreg.h
-include_bsp_HEADERS += ../../../../../../bsps/powerpc/beatnik/include/bsp/if_em_pub.h
-include_bsp_HEADERS += ../../../../../../bsps/powerpc/beatnik/include/bsp/if_gfe_pub.h
-include_bsp_HEADERS += ../../../../../../bsps/powerpc/beatnik/include/bsp/if_mve_pub.h
 include_bsp_HEADERS += ../../../../../../bsps/powerpc/beatnik/include/bsp/irq.h
diff --git a/bsps/powerpc/beatnik/include/bsp/if_em_pub.h b/bsps/powerpc/beatnik/include/bsp/if_em_pub.h
deleted file mode 100644
index eb970e465b..0000000000
--- a/bsps/powerpc/beatnik/include/bsp/if_em_pub.h
+++ /dev/null
@@ -1,22 +0,0 @@
-#ifndef RTEMS_BSDNET_IF_EM_PUBLIC_SYMBOLS_H
-#define RTEMS_BSDNET_IF_EM_PUBLIC_SYMBOLS_H
-
-#include <rtems.h>
-#include <rtems/rtems_bsdnet.h>
-#include <bsp/early_enet_link_status.h>
-
-#ifdef __cplusplus
-  extern "C" {
-#endif
-
-extern int                               rtems_em_attach(struct rtems_bsdnet_ifconfig *, int);
-extern int                               rtems_em_pci_setup(int);
-extern rtems_bsdnet_early_link_check_ops rtems_em_early_link_check_ops;
-
-#ifdef __cplusplus
-  }
-#endif
-
-#endif
-
-
diff --git a/bsps/powerpc/beatnik/include/bsp/if_gfe_pub.h b/bsps/powerpc/beatnik/include/bsp/if_gfe_pub.h
deleted file mode 100644
index 8ea849efb1..0000000000
--- a/bsps/powerpc/beatnik/include/bsp/if_gfe_pub.h
+++ /dev/null
@@ -1,30 +0,0 @@
-#ifndef RTEMS_BSDNET_IF_GFE_PUBLIC_SYMBOLS_H
-#define RTEMS_BSDNET_IF_GFE_PUBLIC_SYMBOLS_H
-
-#include <rtems.h>
-#include <rtems/rtems_bsdnet.h>
-#include <bsp/early_enet_link_status.h>
-#include <net/ethernet.h>
-
-#ifdef __cplusplus
-  extern "C" {
-#endif
-
-extern int
-rtems_gfe_attach(struct rtems_bsdnet_ifconfig *, int);
-
-
-/* enet_addr must be 6 bytes long */
-int
-rtems_gfe_setup(int unit, char *enet_addr, uint32_t base_addr);
-
-extern rtems_bsdnet_early_link_check_ops
-rtems_gfe_early_link_check_ops;
-
-#ifdef __cplusplus
-  }
-#endif
-
-#endif
-
-
diff --git a/bsps/powerpc/beatnik/include/bsp/if_mve_pub.h b/bsps/powerpc/beatnik/include/bsp/if_mve_pub.h
deleted file mode 100644
index 46cc4ccd23..0000000000
--- a/bsps/powerpc/beatnik/include/bsp/if_mve_pub.h
+++ /dev/null
@@ -1,426 +0,0 @@
-#ifndef RTEMS_BSDNET_IF_MVE_PUBLIC_SYMBOLS_H
-#define RTEMS_BSDNET_IF_MVE_PUBLIC_SYMBOLS_H
-
-/* 
- * Authorship
- * ----------
- * This software ('beatnik' RTEMS BSP for MVME6100 and MVME5500) was
- *     created by Till Straumann <strauman@slac.stanford.edu>, 2005-2007,
- * 	   Stanford Linear Accelerator Center, Stanford University.
- * 
- * Acknowledgement of sponsorship
- * ------------------------------
- * The 'beatnik' BSP was produced by
- *     the Stanford Linear Accelerator Center, Stanford University,
- * 	   under Contract DE-AC03-76SFO0515 with the Department of Energy.
- * 
- * Government disclaimer of liability
- * ----------------------------------
- * Neither the United States nor the United States Department of Energy,
- * nor any of their employees, makes any warranty, express or implied, or
- * assumes any legal liability or responsibility for the accuracy,
- * completeness, or usefulness of any data, apparatus, product, or process
- * disclosed, or represents that its use would not infringe privately owned
- * rights.
- * 
- * Stanford disclaimer of liability
- * --------------------------------
- * Stanford University makes no representations or warranties, express or
- * implied, nor assumes any liability for the use of this software.
- * 
- * Stanford disclaimer of copyright
- * --------------------------------
- * Stanford University, owner of the copyright, hereby disclaims its
- * copyright and all other rights in this software.  Hence, anyone may
- * freely use it for any purpose without restriction.  
- * 
- * Maintenance of notices
- * ----------------------
- * In the interest of clarity regarding the origin and status of this
- * SLAC software, this and all the preceding Stanford University notices
- * are to remain affixed to any copy or derivative of this software made
- * or distributed by the recipient and are to be affixed to any copy of
- * software made or distributed by the recipient that contains a copy or
- * derivative of this software.
- * 
- * ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03
- */ 
-#include <rtems.h>
-#include <rtems/rtems_bsdnet.h>
-#include <bsp/early_enet_link_status.h>
-#include <stdint.h>
-
-#ifdef __cplusplus
-  extern "C" {
-#endif
-
-extern int                               rtems_mve_attach(struct rtems_bsdnet_ifconfig *, int);
-extern rtems_bsdnet_early_link_check_ops rtems_mve_early_link_check_ops;
-
-/* Low-level Driver API.
- * This provides driver access to applications that want to use e.g., the second
- * ethernet interface w/o running the BSD TCP/IP stack.
- */
-
-/* Opaque handle */
-struct mveth_private;
-
-/* Direct assignment of MVE flags to user API relies on irqs and x-irqs not overlapping */
-#define BSP_MVE_IRQ_RX		(1<<2)
-#define BSP_MVE_IRQ_TX		(1<<0)
-#define BSP_MVE_IRQ_LINK	(1<<16)
-
-/* Setup an interface.
- * Allocates resources for descriptor rings and sets up the driver software structure.
- *
- * Arguments:
- *	unit:
- *		interface # (1..2). The interface must not be attached to BSD.
- *
- *  driver_tid:
- *		ISR posts RTEMS event # ('unit' - 1) to task with ID 'driver_tid' and disables interrupts
- *		from this interface.
- *
- *	void (*cleanup_txbuf)(void *user_buf, void *cleanup_txbuf_arg, int error_on_tx_occurred):
- *		Pointer to user-supplied callback to release a buffer that had been sent
- *		by BSP_mve_send_buf() earlier. The callback is passed 'cleanup_txbuf_arg'
- *		and a flag indicating whether the send had been successful.
- *		The driver no longer accesses 'user_buf' after invoking this callback.
- *		CONTEXT: This callback is executed either by BSP_mve_swipe_tx() or 
- *		BSP_mve_send_buf(), BSP_mve_init_hw(), BSP_mve_stop_hw() (the latter 
- *		ones calling BSP_mve_swipe_tx()).
- *	void *cleanup_txbuf_arg:
- *		Closure argument that is passed on to 'cleanup_txbuf()' callback;
- *
- *	void *(*alloc_rxbuf)(int *p_size, unsigned long *p_data_addr),
- *		Pointer to user-supplied callback to allocate a buffer for subsequent
- *		insertion into the RX ring by the driver.
- *		RETURNS: opaque handle to the buffer (which may be a more complex object
- *				 such as an 'mbuf'). The handle is not used by the driver directly
- *				 but passed back to the 'consume_rxbuf()' callback.
- *				 Size of the available data area and pointer to buffer's data area
- *				 in '*psize' and '*p_data_area', respectively.
- *				 If no buffer is available, this routine should return NULL in which
- *				 case the driver drops the last packet and re-uses the last buffer
- *				 instead of handing it out to 'consume_rxbuf()'.
- *		CONTEXT: Called when initializing the RX ring (BSP_mve_init_hw()) or when
- *				 swiping it (BSP_mve_swipe_rx()).
- *		
- *
- *	void (*consume_rxbuf)(void *user_buf, void *consume_rxbuf_arg, int len);
- *		Pointer to user-supplied callback to pass a received buffer back to
- *		the user. The driver no longer accesses the buffer after invoking this
- *		callback (with 'len'>0, see below). 'user_buf' is the buffer handle
- *		previously generated by 'alloc_rxbuf()'.
- *		The callback is passed 'cleanup_rxbuf_arg' and a 'len'
- *		argument giving the number of bytes that were received.
- *		'len' may be <=0 in which case the 'user_buf' argument is NULL.
- *		'len' == 0 means that the last 'alloc_rxbuf()' had failed,
- *		'len' < 0 indicates a receiver error. In both cases, the last packet
- *		was dropped/missed and the last buffer will be re-used by the driver.
- *		NOTE: the data are 'prefixed' with two bytes, i.e., the ethernet packet header
- *		      is stored at offset 2 in the buffer's data area. Also, the FCS (4 bytes)
- *		      is appended. 'len' accounts for both.
- *		CONTEXT: Called from BSP_mve_swipe_rx().
- *	void *cleanup_rxbuf_arg:
- *		Closure argument that is passed on to 'consume_rxbuf()' callback;
- *
- *  rx_ring_size, tx_ring_size:
- *		How many big to make the RX and TX descriptor rings. Note that the sizes
- *		may be 0 in which case a reasonable default will be used.
- *		If either ring size is < 0 then the RX or TX will be disabled.
- *		Note that it is illegal in this case to use BSP_mve_swipe_rx() or
- *		BSP_mve_swipe_tx(), respectively.
- *
- *  irq_mask:
- *		Interrupts to enable. OR of flags from above.
- *
- */
-struct mveth_private *
-BSP_mve_setup(
-	int		 unit,
-	rtems_id driver_tid,
-	void (*cleanup_txbuf)(void *user_buf, void *cleanup_txbuf_arg, int error_on_tx_occurred), 
-	void *cleanup_txbuf_arg,
-	void *(*alloc_rxbuf)(int *p_size, uintptr_t *p_data_addr),
-	void (*consume_rxbuf)(void *user_buf, void *consume_rxbuf_arg, int len),
-	void *consume_rxbuf_arg,
-	int		rx_ring_size,
-	int		tx_ring_size,
-	int		irq_mask
-);
-
-/*
- * Alternate 'setup' routine allowing the user to install an ISR rather
- * than a task ID.
- * All parameters (other than 'isr' / 'isr_arg') and the return value
- * are identical to the BSP_mve_setup() entry point.
- */
-struct mveth_private *
-BSP_mve_setup_1(
-	int		 unit,
-	void     (*isr)(void *isr_arg),
-	void     *isr_arg,
-	void (*cleanup_txbuf)(void *user_buf, void *cleanup_txbuf_arg, int error_on_tx_occurred), 
-	void *cleanup_txbuf_arg,
-	void *(*alloc_rxbuf)(int *p_size, uintptr_t *p_data_addr),
-	void (*consume_rxbuf)(void *user_buf, void *consume_rxbuf_arg, int len),
-	void *consume_rxbuf_arg,
-	int		rx_ring_size,
-	int		tx_ring_size,
-	int		irq_mask
-);
-
-
-/*
- * Initialize interface hardware
- *
- * 'mp'			handle obtained by from BSP_mve_setup(). 
- * 'promisc'	whether to set promiscuous flag.
- * 'enaddr'		pointer to six bytes with MAC address. Read
- *				from the device if NULL.
- *
- * Note:        Multicast filters are cleared by this routine.
- *              However, in promiscuous mode the mcast filters
- *              are programmed to accept all multicast frames.
- */
-void
-BSP_mve_init_hw(struct mveth_private *mp, int promisc, unsigned char *enaddr);
-
-/*
- * Clear multicast hash filter. No multicast frames are accepted
- * after executing this routine (unless the hardware was initialized
- * in 'promiscuous' mode).
- */
-void
-BSP_mve_mcast_filter_clear(struct mveth_private *mp);
-
-/*
- * Program multicast filter to accept all multicast frames
- */
-void
-BSP_mve_mcast_filter_accept_all(struct mveth_private *mp);
-
-/*
- * Add a MAC address to the multicast filter.
- * Existing entries are not changed but note that
- * the filter is imperfect, i.e., multiple MAC addresses
- * may alias to a single filter entry. Hence software
- * filtering must still be performed.
- *
- * If a higher-level driver implements IP multicasting
- * then multiple IP addresses may alias to the same MAC
- * address. This driver maintains a 'reference-count'
- * which is incremented every time the same MAC-address
- * is passed to this routine; the address is only removed
- * from the filter if BSP_mve_mcast_filter_accept_del()
- * is called the same number of times (or by BSP_mve_mcast_filter_clear).
- */
-void
-BSP_mve_mcast_filter_accept_add(struct mveth_private *mp, unsigned char *enaddr);
-
-/*
- * Remove a MAC address from the multicast filter.
- * This routine decrements the reference count of the given
- * MAC-address and removes it from the filter once the
- * count reaches zero.
- */
-void
-BSP_mve_mcast_filter_accept_del(struct mveth_private *mp, unsigned char *enaddr);
-
-/*
- * Shutdown hardware and clean out the rings
- */
-void
-BSP_mve_stop_hw(struct mveth_private *mp);
-
-/* calls BSP_mve_stop_hw(), releases all resources and marks the interface
- * as unused.
- * RETURNS 0 on success, nonzero on failure.
- * NOTE:   the handle MUST NOT be used after successful execution of this
- *         routine.
- */
-int
-BSP_mve_detach(struct mveth_private *mp);
-
-int
-BSP_mve_send_buf_raw(struct mveth_private *mp, void *head_p, int h_len,
-    void *data_p, int d_len);
-
-/*
- * Enqueue a mbuf chain or a raw data buffer for transmission;
- * RETURN: #bytes sent or -1 if there are not enough free descriptors
- *
- * If 'len' is <=0 then 'm_head' is assumed to point to a mbuf chain.
- * OTOH, a raw data packet (or a different type of buffer)
- * may be send (non-BSD driver) by pointing data_p to the start of
- * the data and passing 'len' > 0.
- * 'm_head' is passed back to the 'cleanup_txbuf()' callback.
- *
- * Comments: software cache-flushing incurs a penalty if the
- *           packet cannot be queued since it is flushed anyways.
- *           The algorithm is slightly more efficient in the normal
- *			 case, though.
- *
- * RETURNS: # bytes enqueued to device for transmission or -1 if no
- *          space in the TX ring was available.
- */
-int
-BSP_mve_send_buf(struct mveth_private *mp, void *m_head, void *data_p, int len);
-
-/* Descriptor scavenger; cleanup the TX ring, passing all buffers
- * that have been sent to the cleanup_tx() callback.
- * This routine is called from BSP_mve_send_buf(), BSP_mve_init_hw(),
- * BSP_mve_stop_hw().
- *
- * RETURNS: number of buffers processed.
- */
-int
-BSP_mve_swipe_tx(struct mveth_private *mp);
-
-/* Retrieve all received buffers from the RX ring, replacing them
- * by fresh ones (obtained from the alloc_rxbuf() callback). The
- * received buffers are passed to consume_rxbuf().
- *
- * RETURNS: number of buffers processed.
- */
-int
-BSP_mve_swipe_rx(struct mveth_private *mp);
-
-/* read ethernet address from hw to buffer */
-void
-BSP_mve_read_eaddr(struct mveth_private *mp, unsigned char *eaddr);
-
-/* read/write media word.
- *   'cmd': can be SIOCGIFMEDIA, SIOCSIFMEDIA, 0 or 1. The latter
- *          are aliased to the former for convenience.
- *  'parg': pointer to media word.
- *
- * RETURNS: 0 on success, nonzero on error
- *
- * NOTE:    This routine is thread-safe.
- */
-int
-BSP_mve_media_ioctl(struct mveth_private *mp, int cmd, int *parg);
-
-/* Interrupt related routines */
-
-/* Note: the BSP_mve_enable/disable/ack_irqs() entry points
- *       are deprecated.
- *       The newer API where the user passes a mask allows
- *       for more selective control.
- */
-
-/* Enable all supported interrupts at device */
-void
-BSP_mve_enable_irqs(struct mveth_private *mp);
-
-/* Disable all supported interrupts at device */
-void
-BSP_mve_disable_irqs(struct mveth_private *mp);
-
-/* Acknowledge (and clear) all supported interrupts.
- * RETURNS: interrupts that were raised.
- */
-uint32_t
-BSP_mve_ack_irqs(struct mveth_private *mp);
-
-/* Enable interrupts included in 'mask' (leaving
- * already enabled interrupts on). If the mask
- * includes bits that were not passed to the 'setup'
- * routine then the behavior is undefined.
- */
-void
-BSP_mve_enable_irq_mask(struct mveth_private *mp, uint32_t irq_mask);
-
-/* Disable interrupts included in 'mask' (leaving
- * other ones that are currently enabled on). If the
- * mask includes bits that were not passed to the 'setup'
- * routine then the behavior is undefined.
- *
- * RETURNS: Bitmask of interrupts that were enabled upon entry
- *          into this routine. This can be used to restore the
- *          previous state.
- */
-uint32_t
-BSP_mve_disable_irq_mask(struct mveth_private *mp, uint32_t irq_mask);
-
-/* Acknowledge and clear selected interrupts.
- * 
- * RETURNS: All pending interrupts.
- *
- * NOTE:    Only pending interrupts contained in 'mask'
- *          are cleared. Others are left pending.
- *
- *          This routine can be used to check for pending
- *          interrupts (pass mask ==  0) or to clear all
- *          interrupts (pass mask == -1).
- */
-uint32_t
-BSP_mve_ack_irq_mask(struct mveth_private *mp, uint32_t mask);
-
-/* If the PHY link status changes then some
- * internal settings in the ethernet controller's
- * serial port need to be updated to match the
- * PHY settings. Use this routine to perform the
- * necessary steps after a link change has been
- * detected.
- *
- * RETURNS: 0 on success, -1 if the PHY state
- *          could not be determined.
- *
- *          The current state of the media as read
- *          by BSP_mve_media_ioctl() is returned in
- *          *pmedia.
- *
- * NOTE:    This routine calls BSP_mve_media_ioctl().
- */
-int
-BSP_mve_ack_link_chg(struct mveth_private *mp, int *pmedia);
-
-/* Retrieve the driver daemon TID that was passed to
- * BSP_mve_setup().
- */
-
-rtems_id
-BSP_mve_get_tid(struct mveth_private *mp);
-
-/* Dump statistics to file (stdout if NULL)
- *
- * NOTE: this routine is not thread safe
- */
-void
-BSP_mve_dump_stats(struct mveth_private *mp, FILE *f);
-
-/* 
- *
- * Example driver task loop (note: no synchronization of
- * buffer access shown!).
- * RTEMS_EVENTx = 0,1 or 2 depending on IF unit.
- *
- *    / * setup (obtain handle) and initialize hw here * /
- *
- *    do {
- *      / * ISR disables IRQs and posts event * /
- *		rtems_event_receive( RTEMS_EVENTx, RTEMS_WAIT | RTEMS_EVENT_ANY, RTEMS_NO_TIMEOUT, &evs );
- *		irqs = BSP_mve_ack_irqs(handle);
- *      if ( irqs & BSP_MVE_IRQ_TX ) {
- *			BSP_mve_swipe_tx(handle); / * cleanup_txbuf() callback executed * /
- *		}
- *      if ( irqs & BSP_MVE_IRQ_RX ) {
- *			BSP_mve_swipe_rx(handle); / * alloc_rxbuf() and consume_rxbuf() executed * /
- *		}
- *		if ( irqs & BSP_MVE_IRQ_LINK ) {
- *          / * update serial port settings from current link status * /
- *          BSP_mve_ack_link_chg(handle, 0);
- *		}
- *		BSP_mve_enable_irqs(handle);
- *    } while (1);
- *
- */
-
-#ifdef __cplusplus
-  }
-#endif
-
-#endif