Remove make preinstall

A speciality of the RTEMS build system was the make preinstall step.  It
copied header files from arbitrary locations into the build tree.  The
header files were included via the -Bsome/build/tree/path GCC command
line option.

This has at least seven problems:

* The make preinstall step itself needs time and disk space.

* Errors in header files show up in the build tree copy.  This makes it
  hard for editors to open the right file to fix the error.

* There is no clear relationship between source and build tree header
  files.  This makes an audit of the build process difficult.

* The visibility of all header files in the build tree makes it
  difficult to enforce API barriers.  For example it is discouraged to
  use BSP-specifics in the cpukit.

* An introduction of a new build system is difficult.

* Include paths specified by the -B option are system headers.  This
  may suppress warnings.

* The parallel build had sporadic failures on some hosts.

This patch removes the make preinstall step.   All installed header
files are moved to dedicated include directories in the source tree.
Let @RTEMS_CPU@ be the target architecture, e.g. arm, powerpc, sparc,
etc.  Let @RTEMS_BSP_FAMILIY@ be a BSP family base directory, e.g.
erc32, imx, qoriq, etc.

The new cpukit include directories are:

* cpukit/include

* cpukit/score/cpu/@RTEMS_CPU@/include

* cpukit/libnetworking

The new BSP include directories are:

* bsps/include

* bsps/@RTEMS_CPU@/include

* bsps/@RTEMS_CPU@/@RTEMS_BSP_FAMILIY@/include

There are build tree include directories for generated files.

The include directory order favours the most general header file, e.g.
it is not possible to override general header files via the include path
order.

The "bootstrap -p" option was removed.  The new "bootstrap -H" option
should be used to regenerate the "headers.am" files.

Update #3254.

1 files changed, 198 insertions, 0 deletions

diff --git a/bsps/include/bsp/vme_am_defs.h b/bsps/include/bsp/vme_am_defs.h
new file mode 100644
index 0000000000..efa28b3aa0
--- /dev/null
+++ b/bsps/include/bsp/vme_am_defs.h
@@ -0,0 +1,198 @@
+/**
+ *  @file
+ *
+ *  @ingroup shared_vmeamdefs
+ *
+ *  @brief vxworks compatible addressing modes
+ */
+
+#ifndef VME_AM_DEFINITIONS_H
+#define VME_AM_DEFINITIONS_H
+
+/*
+ * Authorship
+ * ----------
+ * This software was created by
+ *     Till Straumann <strauman@slac.stanford.edu>, 2002-2007,
+ * 	   Stanford Linear Accelerator Center, Stanford University.
+ *
+ * Acknowledgement of sponsorship
+ * ------------------------------
+ * This software was produced by
+ *     the Stanford Linear Accelerator Center, Stanford University,
+ * 	   under Contract DE-AC03-76SFO0515 with the Department of Energy.
+ *
+ * Government disclaimer of liability
+ * ----------------------------------
+ * Neither the United States nor the United States Department of Energy,
+ * nor any of their employees, makes any warranty, express or implied, or
+ * assumes any legal liability or responsibility for the accuracy,
+ * completeness, or usefulness of any data, apparatus, product, or process
+ * disclosed, or represents that its use would not infringe privately owned
+ * rights.
+ *
+ * Stanford disclaimer of liability
+ * --------------------------------
+ * Stanford University makes no representations or warranties, express or
+ * implied, nor assumes any liability for the use of this software.
+ *
+ * Stanford disclaimer of copyright
+ * --------------------------------
+ * Stanford University, owner of the copyright, hereby disclaims its
+ * copyright and all other rights in this software.  Hence, anyone may
+ * freely use it for any purpose without restriction.
+ *
+ * Maintenance of notices
+ * ----------------------
+ * In the interest of clarity regarding the origin and status of this
+ * SLAC software, this and all the preceding Stanford University notices
+ * are to remain affixed to any copy or derivative of this software made
+ * or distributed by the recipient and are to be affixed to any copy of
+ * software made or distributed by the recipient that contains a copy or
+ * derivative of this software.
+ *
+ * ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03
+ */
+
+/**
+ *  @defgroup shared_vmeamdefs VME_AM_DEFS
+ *
+ *  @ingroup shared_vmeuniverse
+ *
+ *  @brief 64-bit *addresses* are not supported [data are].
+ */
+
+#ifndef VME_AM_STD_SUP_BLT
+#define	VME_AM_STD_SUP_BLT			0x3f
+#endif
+#ifndef VME_AM_STD_SUP_ASCENDING
+#define	VME_AM_STD_SUP_ASCENDING	0x3f
+#endif
+#ifndef VME_AM_STD_SUP_PGM
+#define	VME_AM_STD_SUP_PGM			0x3e
+#endif
+#ifndef VME_AM_STD_SUP_MBLT
+#define	VME_AM_STD_SUP_MBLT			0x3c
+#endif
+#ifndef VME_AM_STD_USR_BLT
+#define	VME_AM_STD_USR_BLT			0x3b
+#endif
+#ifndef VME_AM_STD_USR_ASCENDING
+#define	VME_AM_STD_USR_ASCENDING	0x3b
+#endif
+#ifndef VME_AM_STD_USR_PGM
+#define	VME_AM_STD_USR_PGM			0x3a
+#endif
+#ifndef VME_AM_STD_SUP_DATA
+#define	VME_AM_STD_SUP_DATA			0x3d
+#endif
+#ifndef VME_AM_STD_USR_DATA
+#define	VME_AM_STD_USR_DATA			0x39
+#endif
+#ifndef VME_AM_STD_USR_MBLT
+#define	VME_AM_STD_USR_MBLT			0x38
+#endif
+#ifndef VME_AM_EXT_SUP_BLT
+#define	VME_AM_EXT_SUP_BLT			0x0f
+#endif
+#ifndef VME_AM_EXT_SUP_ASCENDING
+#define	VME_AM_EXT_SUP_ASCENDING	0x0f
+#endif
+#ifndef VME_AM_EXT_SUP_PGM
+#define	VME_AM_EXT_SUP_PGM			0x0e
+#endif
+#ifndef VME_AM_EXT_SUP_DATA
+#define	VME_AM_EXT_SUP_DATA			0x0d
+#endif
+#ifndef VME_AM_EXT_SUP_MBLT
+#define	VME_AM_EXT_SUP_MBLT			0x0c
+#endif
+#ifndef VME_AM_EXT_USR_BLT
+#define	VME_AM_EXT_USR_BLT			0x0b
+#endif
+#ifndef VME_AM_EXT_USR_ASCENDING
+#define	VME_AM_EXT_USR_ASCENDING	0x0b
+#endif
+#ifndef VME_AM_EXT_USR_PGM
+#define	VME_AM_EXT_USR_PGM			0x0a
+#endif
+#ifndef VME_AM_EXT_USR_DATA
+#define	VME_AM_EXT_USR_DATA			0x09
+#endif
+#ifndef VME_AM_EXT_USR_MBLT
+#define	VME_AM_EXT_USR_MBLT			0x08
+#endif
+#ifndef VME_AM_2eVME_6U
+#define VME_AM_2eVME_6U				0x20
+#endif
+#ifndef VME_AM_2eVME_3U
+#define VME_AM_2eVME_3U				0x21
+#endif
+#ifndef VME_AM_CSR
+#define VME_AM_CSR					0x2f
+#endif
+#ifndef VME_AM_SUP_SHORT_IO
+#define	VME_AM_SUP_SHORT_IO			0x2d
+#endif
+#ifndef VME_AM_USR_SHORT_IO
+#define	VME_AM_USR_SHORT_IO			0x29
+#endif
+#ifndef VME_AM_IS_SHORT
+#define VME_AM_IS_SHORT(a)			(((a) & 0x30) == 0x20)
+#endif
+#ifndef VME_AM_IS_STD
+#define VME_AM_IS_STD(a)			(((a) & 0x30) == 0x30)
+#endif
+#ifndef VME_AM_IS_EXT
+#define VME_AM_IS_EXT(a)			(((a) & 0x30) == 0x00)
+#endif
+#ifndef VME_AM_IS_SUP
+#define VME_AM_IS_SUP(a)			((a)  & 4)
+#endif
+
+/* Mask for standard address modifiers */
+
+#ifndef VME_AM_MASK
+#define VME_AM_MASK					0x3f
+#endif
+
+/* Hint that a window is mapping memory; the
+ * driver may assume it to be safe to enable decoupled
+ * cycles, caching and the like...
+ */
+#ifndef VME_AM_IS_MEMORY
+#define VME_AM_IS_MEMORY			(1<<8)
+#endif
+
+/* I don't know AMs for 2eSST so we use some extra bits;
+ * HOWEVER: these are just qualifiers to the VME_AM_2eVME_xx modes
+ *          i.e., if you want 2eSST you must also select 2eVME...
+ */
+
+/* 2eSST broadcast; you still need to set one of the speed bits */
+#define VME_AM_2eSST_BCST			(1<<9)
+/* Low speed (driver specific) */
+#define VME_AM_2eSST_LO				(1<<10)
+/* Mid speed (driver specific) */
+#define VME_AM_2eSST_MID			(2<<10)
+/* High speed (driver specific) */
+#define VME_AM_2eSST_HI				(3<<10)
+
+#define VME_AM_IS_2eSST(am)			((am) & (3<<10))
+
+/* Use 8/16/32-bit transfers for coupled- or BLT cycles
+ * (MBLT, 2exxx are probably always 64-bit)
+ */
+#define VME_MODE_DBW_MSK			(3<<12)
+#define VME_MODE_DBW8				(1<<12)
+#define VME_MODE_DBW16				(2<<12)
+#define VME_MODE_DBW32				(3<<12)
+
+/* Unused Flags 1<<14 .. 1<<23  are reserved
+ *
+ * (20-23 used by DMA API).
+ * Flags 1<<24 .. 1<<31 are for driver specific options
+ */
+
+
+#endif