diff options
| author | Christian Mauderer <christian.mauderer@embedded-brains.de> | 2023-05-04 14:59:32 +0200 |
|---|---|---|
| committer | Christian Mauderer <christian.mauderer@embedded-brains.de> | 2023-05-22 09:45:42 +0200 |
| commit | 97819b8a3178ccc3790b7f1b36d7ed235a1863ff (patch) | |
| tree | b4ee8a8c27237dbf0eee891fd7c91de7d2e21717 /bsps/arm/imxrt/nxp/boards/evkbimxrt1050/pin_mux.c | |
| parent | bsps/imxrt: Make chip start code chip specific (diff) | |
| download | rtems-97819b8a3178ccc3790b7f1b36d7ed235a1863ff.tar.bz2 | |
bsps/imxrt: Move board specific files
Move the files that are board specific and not specific to the chip
family into a separate folder.
Diffstat (limited to 'bsps/arm/imxrt/nxp/boards/evkbimxrt1050/pin_mux.c')
| -rw-r--r-- | bsps/arm/imxrt/nxp/boards/evkbimxrt1050/pin_mux.c | 43 |
1 files changed, 0 insertions, 43 deletions
diff --git a/bsps/arm/imxrt/nxp/boards/evkbimxrt1050/pin_mux.c b/bsps/arm/imxrt/nxp/boards/evkbimxrt1050/pin_mux.c deleted file mode 100644 index 2023630052..0000000000 --- a/bsps/arm/imxrt/nxp/boards/evkbimxrt1050/pin_mux.c +++ /dev/null @@ -1,43 +0,0 @@ -/* - * Copyright 2018 NXP. - * All rights reserved. - * - * SPDX-License-Identifier: BSD-3-Clause - */ - -#include "fsl_common.h" -#include "fsl_iomuxc.h" -#include <bsp.h> -#include <bsp/start.h> - -BSP_START_TEXT_SECTION -void BOARD_InitDEBUG_UARTPins(void) { - CLOCK_EnableClock(kCLOCK_Iomuxc); /* iomuxc clock (iomuxc_clk_enable): 0x03u */ - - IOMUXC_SetPinMux( - IOMUXC_GPIO_AD_B0_12_LPUART1_TXD, /* GPIO_AD_B0_12 is configured as LPUART1_TX */ - 0U); /* Software Input On Field: Input Path is determined by functionality */ - IOMUXC_SetPinMux( - IOMUXC_GPIO_AD_B0_13_LPUART1_RXD, /* GPIO_AD_B0_13 is configured as LPUART1_RX */ - 0U); /* Software Input On Field: Input Path is determined by functionality */ - IOMUXC_SetPinConfig( - IOMUXC_GPIO_AD_B0_12_LPUART1_TXD, /* GPIO_AD_B0_12 PAD functional properties : */ - 0x10B0u); /* Slew Rate Field: Slow Slew Rate - Drive Strength Field: R0/6 - Speed Field: medium(100MHz) - Open Drain Enable Field: Open Drain Disabled - Pull / Keep Enable Field: Pull/Keeper Enabled - Pull / Keep Select Field: Keeper - Pull Up / Down Config. Field: 100K Ohm Pull Down - Hyst. Enable Field: Hysteresis Disabled */ - IOMUXC_SetPinConfig( - IOMUXC_GPIO_AD_B0_13_LPUART1_RXD, /* GPIO_AD_B0_13 PAD functional properties : */ - 0x10B0u); /* Slew Rate Field: Slow Slew Rate - Drive Strength Field: R0/6 - Speed Field: medium(100MHz) - Open Drain Enable Field: Open Drain Disabled - Pull / Keep Enable Field: Pull/Keeper Enabled - Pull / Keep Select Field: Keeper - Pull Up / Down Config. Field: 100K Ohm Pull Down - Hyst. Enable Field: Hysteresis Disabled */ -} |