bsps/imxrt: Adapt to new mcux-sdk version

Remove the old NXP MCUXpresso SDK and adapt the BSP so that it uses the
new mcux-sdk.

1 files changed, 0 insertions, 254 deletions

diff --git a/bsps/arm/imxrt/include/fsl_bee.h b/bsps/arm/imxrt/include/fsl_bee.h
deleted file mode 100644
index 201177a41f..0000000000
--- a/bsps/arm/imxrt/include/fsl_bee.h
+++ /dev/null
@@ -1,254 +0,0 @@
-/*
- * Copyright 2017, 2019 NXP
- * All rights reserved.
- *
- *
- * SPDX-License-Identifier: BSD-3-Clause
- */
-
-#ifndef _FSL_BEE_H_
-#define _FSL_BEE_H_
-
-#include "fsl_common.h"
-
-/*!
- * @addtogroup bee
- * @{
- */
-
-/*******************************************************************************
- * Definitions
- *******************************************************************************/
-
-/*! @name Driver version */
-/*@{*/
-/*! @brief BEE driver version. Version 2.0.2.
- *
- * Current version: 2.0.2
- *
- * Change log:
- *
- * - 2.0.2
- *   - Bug Fixes
- *     - Fixed MISRA issue.
- *
- * - 2.0.1
- *   - Bug Fixes
- *    - Fixed bug in key user key loading sequence. BEE must be enabled during loading of user key.
- *    - Fixed typos in comments.
- *   - New Features
- *    - Added configuration setting for endian swap, access permission and region security level.
- *	 - Improvements
- *	  - Setting of AES nonce was moved from BEE_SetRegionKey() into separate BEE_SetRegionNonce() function.
- *     - Changed handling of region settings. Both regions are configured simultaneously by BEE_SetConfig() function.
- *      Configuration of FAC start and end address using IOMUXC_GPRs was moved to application.
- *    - Default value for region address offset was changed to 0.
- *
- * - 2.0.0
- *   - Initial version
- */
-#define FSL_BEE_DRIVER_VERSION (MAKE_VERSION(2, 0, 2))
-/*@}*/
-
-/*! @brief BEE aes mode. */
-typedef enum _bee_aes_mode
-{
-    kBEE_AesEcbMode = 0U, /*!< AES ECB Mode */
-    kBEE_AesCtrMode = 1U  /*!< AES CTR Mode */
-} bee_aes_mode_t;
-
-/*! @brief BEE region. */
-typedef enum _bee_region
-{
-    kBEE_Region0 = 0U, /*!< BEE region 0 */
-    kBEE_Region1 = 1U  /*!< BEE region 1 */
-} bee_region_t;
-
-/*! @brief BEE ac prot enable. */
-typedef enum _bee_ac_prot_enable
-{
-    kBEE_AccessProtDisabled = 0U, /*!< BEE access permission control disabled */
-    kBEE_AccessProtEnabled  = 1U  /*!< BEE access permission control enabled */
-} bee_ac_prot_enable;
-
-/*! @brief BEE endian swap enable. */
-typedef enum _bee_endian_swap_enable
-{
-    kBEE_EndianSwapDisabled = 1U, /*!< BEE endian swap disabled */
-    kBEE_EndianSwapEnabled  = 0U  /*!< BEE endian swap enabled */
-} bee_endian_swap_enable;
-
-/*! @brief BEE security level. */
-typedef enum _bee_security_level
-{
-    kBEE_SecurityLevel0 = 0U, /*!< BEE security level 0 */
-    kBEE_SecurityLevel1 = 1U, /*!< BEE security level 1 */
-    kBEE_SecurityLevel2 = 2U, /*!< BEE security level 2 */
-    kBEE_SecurityLevel3 = 3U  /*!< BEE security level 3 */
-} bee_security_level;
-
-/*! @brief BEE status flags. */
-typedef enum _bee_status_flags
-{
-    kBEE_DisableAbortFlag     = 1U,                      /*!< Disable abort flag. */
-    kBEE_Reg0ReadSecViolation = 2U,                      /*!< Region-0 read channel security violation */
-    kBEE_ReadIllegalAccess    = 4U,                      /*!< Read channel illegal access detected */
-    kBEE_Reg1ReadSecViolation = 8U,                      /*!< Region-1 read channel security violation */
-    kBEE_Reg0AccessViolation  = 16U,                     /*!< Protected region-0 access violation */
-    kBEE_Reg1AccessViolation  = 32U,                     /*!< Protected region-1 access violation */
-    kBEE_IdleFlag             = BEE_STATUS_BEE_IDLE_MASK /*!< Idle flag */
-} bee_status_flags_t;
-
-/*! @brief BEE region configuration structure. */
-typedef struct _bee_region_config
-{
-    bee_aes_mode_t region0Mode;          /*!< AES mode used for encryption/decryption for region 0 */
-    bee_aes_mode_t region1Mode;          /*!< AES mode used for encryption/decryption for region 1 */
-    uint32_t region0AddrOffset;          /*!< Region 0 address offset */
-    uint32_t region1AddrOffset;          /*!< Region 1 address offset */
-    bee_security_level region0SecLevel;  /*!< Region 0 security level */
-    bee_security_level region1SecLevel;  /*!< Region 1 security level */
-    uint32_t region1Bot;                 /*!< Region 1 bottom address */
-    uint32_t region1Top;                 /*!< Region 1 top address */
-    bee_ac_prot_enable accessPermission; /*!< Access permission control enable/disable */
-    bee_endian_swap_enable endianSwapEn; /*!< Endian swap enable/disable */
-} bee_region_config_t;
-
-/*******************************************************************************
- * API
- ******************************************************************************/
-#if defined(__cplusplus)
-extern "C" {
-#endif
-
-/*!
- * @brief Resets BEE module to factory default values.
- *
- * This function performs hardware reset of BEE module. Attributes and keys from software for both regions are cleared.
- *
- * @param base BEE peripheral address.
- */
-void BEE_Init(BEE_Type *base);
-
-/*!
- * @brief Resets BEE module, clears keys for both regions and disables clock to the BEE.
- *
- * This function performs hardware reset of BEE module and disables clocks. Attributes and keys from software for both
- * regions are cleared.
- *
- * @param base BEE peripheral address.
- */
-void BEE_Deinit(BEE_Type *base);
-
-/*!
- * @brief Enables BEE decryption.
- *
- * This function enables decryption using BEE.
- *
- * @param base BEE peripheral address.
- */
-static inline void BEE_Enable(BEE_Type *base)
-{
-    base->CTRL |= BEE_CTRL_BEE_ENABLE_MASK;
-}
-
-/*!
- * @brief Disables BEE decryption.
- *
- * This function disables decryption using BEE.
- *
- * @param base BEE peripheral address.
- */
-static inline void BEE_Disable(BEE_Type *base)
-{
-    base->CTRL &= ~BEE_CTRL_BEE_ENABLE_MASK;
-}
-
-/*!
- * @brief Loads default values to the BEE region configuration structure.
- *
- * Loads default values to the BEE region configuration structure. The default values are as follows:
- * @code
- *   config->region0Mode = kBEE_AesCtrMode;
- *   config->region1Mode = kBEE_AesCtrMode;
- *   config->region0AddrOffset = 0U;
- *   config->region1AddrOffset = 0U;
- *   config->region0SecLevel = kBEE_SecurityLevel3;
- *   config->region1SecLevel = kBEE_SecurityLevel3;
- *   config->region1Bot = 0U;
- *   config->region1Top = 0U;
- *   config->accessPermission = kBEE_AccessProtDisabled;
- *   config->endianSwapEn = kBEE_EndianSwapEnabled;
- * @endcode
- *
- * @param config Configuration structure for BEE peripheral.
- */
-void BEE_GetDefaultConfig(bee_region_config_t *config);
-
-/*!
- * @brief Sets BEE configuration.
- *
- * This function sets BEE peripheral and BEE region settings accorging to given configuration structure.
- *
- * @param base BEE peripheral address.
- * @param config Configuration structure for BEE.
- */
-void BEE_SetConfig(BEE_Type *base, const bee_region_config_t *config);
-
-/*!
- * @brief Loads the AES key for selected region into BEE key registers.
- *
- * This function loads given AES key to BEE register for the given region.
- * The key must be 32-bit aligned and stored in little-endian format.
- *
- * Please note, that eFuse BEE_KEYx_SEL must be set accordingly to be able to load and use key loaded in BEE registers.
- * Otherwise, key cannot loaded and BEE will use key from OTPMK or SW_GP2.
- *
- * @param base BEE peripheral address.
- * @param region Selection of the BEE region to be configured.
- * @param key AES key (in little-endian format).
- * @param keySize Size of AES key.
- */
-status_t BEE_SetRegionKey(BEE_Type *base, bee_region_t region, const uint8_t *key, size_t keySize);
-
-/*!
- * @brief Loads the nonce for selected region into BEE nonce registers.
- *
- * This function loads given nonce(only AES CTR mode) to BEE register for the given region.
- * The nonce must be 32-bit aligned and stored in little-endian format.
- *
- * @param base BEE peripheral address.
- * @param region Selection of the BEE region to be configured.
- * @param nonce AES nonce (in little-endian format).
- * @param nonceSize Size of AES nonce.
- */
-status_t BEE_SetRegionNonce(BEE_Type *base, bee_region_t region, const uint8_t *nonce, size_t nonceSize);
-
-/*!
- * @brief Gets the BEE status flags.
- *
- * This function returns status of BEE peripheral.
- *
- * @param base BEE peripheral address.
- *
- * @return The status flags. This is the logical OR of members of the
- *         enumeration ::bee_status_flags_t
- */
-uint32_t BEE_GetStatusFlags(BEE_Type *base);
-
-/*!
- * @brief Clears the BEE status flags.
- *
- * @param base BEE peripheral base address.
- * @param mask The status flags to clear. This is a logical OR of members of the
- *             enumeration ::bee_status_flags_t
- */
-void BEE_ClearStatusFlags(BEE_Type *base, uint32_t mask);
-
-#if defined(__cplusplus)
-}
-#endif
-
-/*@}*/
-
-#endif /* _FSL_BEE_H_ */