/* SPDX-License-Identifier: BSD-2-Clause */
/**
* @file
*
* @ingroup RTEMSTestCaseAcfgValDefault
*/
/*
* Copyright (C) 2021 embedded brains GmbH (http://www.embedded-brains.de)
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* This file is part of the RTEMS quality process and was automatically
* generated. If you find something that needs to be fixed or
* worded better please post a report or patch to an RTEMS mailing list
* or raise a bug report:
*
* https://www.rtems.org/bugs.html
*
* For information on updating and regenerating please refer to the How-To
* section in the Software Requirements Engineering chapter of the
* RTEMS Software Engineering manual. The manual is provided as a part of
* a release. For development sources please refer to the online
* documentation at:
*
* https://docs.rtems.org
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <bsp.h>
#include <string.h>
#include <rtems/score/userextdata.h>
#include "tx-support.h"
#include <rtems/test.h>
/**
* @defgroup RTEMSTestCaseAcfgValDefault spec:/acfg/val/default
*
* @ingroup RTEMSTestSuiteTestsuitesValidationAcfg0
*
* @brief Tests the default values of application configuration options.
*
* This test case performs the following actions:
*
* - Check the effect of application configuration options with optional
* BSP-provided settings.
*
* - Check the configured CONFIGURE_IDLE_TASK_BODY.
*
* - Check the default value CONFIGURE_IDLE_TASK_STACK_SIZE where the
* optional BSP-provided default value is enabled.
*
* - Check the default value CONFIGURE_INTERRUPT_STACK_SIZE where the
* optional BSP-provided default value is enabled.
*
* - Check the BSP-provided initial extension is registered.
*
* - Try to create a barrier.
*
* - Check that the returned status code is RTEMS_TOO_MANY.
*
* - Try to construct a message queue.
*
* - Check that the returned status code is RTEMS_TOO_MANY.
*
* - Try to create a partition.
*
* - Check that the returned status code is RTEMS_TOO_MANY.
*
* - Try to create a period.
*
* - Check that the returned status code is RTEMS_TOO_MANY.
*
* - Check that the processor maximum is one.
*
* - Try to create a semaphore.
*
* - Check that the returned status code is RTEMS_TOO_MANY.
*
* - Try to construct a task.
*
* - Check that the returned status code is RTEMS_TOO_MANY.
*
* - Check the default CONFIGURE_MAXIMUM_TASKS value. A maximum Classic API
* task value of zero is only configurable if
* CONFIGURE_IDLE_TASK_INITIALIZES_APPLICATION is defined or
* CONFIGURE_MAXIMUM_POSIX_THREADS is set to a positive value. The default
* value of zero for CONFIGURE_MAXIMUM_POSIX_THREADS is used by the test
* suite containing the test case. The test suite defines
* CONFIGURE_IDLE_TASK_INITIALIZES_APPLICATION.
*
* - Try to create a timer.
*
* - Check that the returned status code is RTEMS_TOO_MANY.
*
* - Try to create a user extension set.
*
* - Check that the returned status code is RTEMS_TOO_MANY.
*
* @{
*/
#define NAME rtems_build_name( 'N', 'A', 'M', 'E' )
RTEMS_ALIGNED(RTEMS_TASK_STORAGE_ALIGNMENT) static char task_storage[
RTEMS_TASK_STORAGE_SIZE(
RTEMS_MINIMUM_STACK_SIZE,
RTEMS_DEFAULT_ATTRIBUTES
)
];
static const rtems_task_config task_config = {
.name = NAME,
.initial_priority = 1,
.storage_area = task_storage,
.storage_size = sizeof( task_storage ),
.maximum_thread_local_storage_size = 0,
.initial_modes = RTEMS_DEFAULT_MODES,
.attributes = RTEMS_DEFAULT_ATTRIBUTES
};
/**
* @brief Check the effect of application configuration options with optional
* BSP-provided settings.
*/
static void AcfgValDefault_Action_0( void )
{
rtems_extensions_table bsp = BSP_INITIAL_EXTENSION;
/*
* Check the configured CONFIGURE_IDLE_TASK_BODY.
*/
T_step_eq_ptr( 0, rtems_configuration_get_idle_task(), IdleBody );
/*
* Check the default value CONFIGURE_IDLE_TASK_STACK_SIZE where the optional
* BSP-provided default value is enabled.
*/
T_step_eq_sz(
1,
rtems_configuration_get_idle_task_stack_size(),
#if defined(BSP_IDLE_TASK_STACK_SIZE)
BSP_IDLE_TASK_STACK_SIZE
#else
CPU_STACK_MINIMUM_SIZE
#endif
);
/*
* Check the default value CONFIGURE_INTERRUPT_STACK_SIZE where the optional
* BSP-provided default value is enabled.
*/
T_step_eq_sz(
2,
rtems_configuration_get_interrupt_stack_size(),
#if defined(BSP_INTERRUPT_STACK_SIZE)
BSP_INTERRUPT_STACK_SIZE
#else
CPU_STACK_MINIMUM_SIZE
#endif
);
/*
* Check the BSP-provided initial extension is registered.
*/
T_step_eq_sz( 3, _User_extensions_Initial_count, 1 );
T_step_eq_ptr(
4,
_User_extensions_Initial_extensions[ 0 ].fatal,
bsp.fatal
);
}
/**
* @brief Try to create a barrier.
*/
static void AcfgValDefault_Action_1( void )
{
rtems_status_code sc;
rtems_id id;
sc = rtems_barrier_create(
NAME,
RTEMS_DEFAULT_ATTRIBUTES,
1,
&id
);
/*
* Check that the returned status code is RTEMS_TOO_MANY.
*/
T_step_rsc( 5, sc, RTEMS_TOO_MANY );
}
/**
* @brief Try to construct a message queue.
*/
static void AcfgValDefault_Action_2( void )
{
rtems_message_queue_config config;
RTEMS_MESSAGE_QUEUE_BUFFER( 1 ) buffers[ 1 ];
rtems_status_code sc;
rtems_id id;
memset( &config, 0, sizeof( config ) );
config.name = NAME;
config.maximum_pending_messages = 1;
config.maximum_message_size = 1;
config.storage_size = sizeof( buffers );
config.storage_area = buffers;
config.attributes = RTEMS_DEFAULT_ATTRIBUTES;
sc = rtems_message_queue_construct( &config, &id );
/*
* Check that the returned status code is RTEMS_TOO_MANY.
*/
T_step_rsc( 6, sc, RTEMS_TOO_MANY );
}
/**
* @brief Try to create a partition.
*/
static void AcfgValDefault_Action_3( void )
{
RTEMS_ALIGNED( RTEMS_PARTITION_ALIGNMENT ) uint8_t buffers[ 1 ][ 32 ];
rtems_status_code sc;
rtems_id id;
sc = rtems_partition_create(
NAME,
buffers,
sizeof( buffers ),
sizeof( buffers[ 0 ] ),
RTEMS_DEFAULT_ATTRIBUTES,
&id
);
/*
* Check that the returned status code is RTEMS_TOO_MANY.
*/
T_step_rsc( 7, sc, RTEMS_TOO_MANY );
}
/**
* @brief Try to create a period.
*/
static void AcfgValDefault_Action_4( void )
{
rtems_status_code sc;
rtems_id id;
sc = rtems_rate_monotonic_create( NAME, &id );
/*
* Check that the returned status code is RTEMS_TOO_MANY.
*/
T_step_rsc( 8, sc, RTEMS_TOO_MANY );
}
/**
* @brief Check that the processor maximum is one.
*/
static void AcfgValDefault_Action_5( void )
{
T_step_eq_u32( 9, rtems_scheduler_get_processor_maximum(), 1 );
}
/**
* @brief Try to create a semaphore.
*/
static void AcfgValDefault_Action_6( void )
{
rtems_status_code sc;
rtems_id id;
sc = rtems_semaphore_create(
NAME,
0,
RTEMS_DEFAULT_ATTRIBUTES,
0,
&id
);
/*
* Check that the returned status code is RTEMS_TOO_MANY.
*/
T_step_rsc( 10, sc, RTEMS_TOO_MANY );
}
/**
* @brief Try to construct a task.
*/
static void AcfgValDefault_Action_7( void )
{
rtems_status_code sc;
rtems_id id;
sc = rtems_task_construct( &task_config, &id );
/*
* Check that the returned status code is RTEMS_TOO_MANY.
*/
T_step_rsc( 11, sc, RTEMS_TOO_MANY );
/*
* Check the default CONFIGURE_MAXIMUM_TASKS value. A maximum Classic API
* task value of zero is only configurable if
* CONFIGURE_IDLE_TASK_INITIALIZES_APPLICATION is defined or
* CONFIGURE_MAXIMUM_POSIX_THREADS is set to a positive value. The default
* value of zero for CONFIGURE_MAXIMUM_POSIX_THREADS is used by the test
* suite containing the test case. The test suite defines
* CONFIGURE_IDLE_TASK_INITIALIZES_APPLICATION.
*/
T_step_eq_u32( 12, rtems_configuration_get_maximum_tasks(), 0 );
}
/**
* @brief Try to create a timer.
*/
static void AcfgValDefault_Action_8( void )
{
rtems_status_code sc;
rtems_id id;
sc = rtems_timer_create( NAME, &id );
/*
* Check that the returned status code is RTEMS_TOO_MANY.
*/
T_step_rsc( 13, sc, RTEMS_TOO_MANY );
}
/**
* @brief Try to create a user extension set.
*/
static void AcfgValDefault_Action_9( void )
{
rtems_extensions_table table;
rtems_status_code sc;
rtems_id id;
memset( &table, 0, sizeof( table ) );
sc = rtems_extension_create( NAME, &table, &id );
/*
* Check that the returned status code is RTEMS_TOO_MANY.
*/
T_step_rsc( 14, sc, RTEMS_TOO_MANY );
}
/**
* @fn void T_case_body_AcfgValDefault( void )
*/
T_TEST_CASE( AcfgValDefault )
{
T_plan( 15 );
AcfgValDefault_Action_0();
AcfgValDefault_Action_1();
AcfgValDefault_Action_2();
AcfgValDefault_Action_3();
AcfgValDefault_Action_4();
AcfgValDefault_Action_5();
AcfgValDefault_Action_6();
AcfgValDefault_Action_7();
AcfgValDefault_Action_8();
AcfgValDefault_Action_9();
}
/** @} */