/*
* Copyright (c) 2012 embedded brains GmbH. All rights reserved.
*
* embedded brains GmbH
* Obere Lagerstr. 30
* 82178 Puchheim
* Germany
* <rtems@embedded-brains.de>
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.org/license/LICENSE.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <fcntl.h>
#include <rtems/blkdev.h>
#include "rtems/sparse-disk.h"
#include "tmacros.h"
const char rtems_test_name[] = "SPARSEDISK 1";
/* Number of bytes for test pattern within a sparse disk container */
#define STATIC_PATTERN_SIZE 4096
/* Block size used for the sparse disk in a sparse disk container */
#define STATIC_BLOCK_SIZE 4096
/* Number of block allocated for the sparse disk in a sparse disk container */
#define STATIC_ALLOCATED_BLOCK_COUNT 1
/* Blocks simulated by the sparse disk in a disk container */
#define STATIC_SIMULATED_BLOCK_COUNT 4096
/*
* Container which cotains a sparse disk + memory for key table and data as would get
* allocated by rtems_sparse_disk_create() + memory for a memory test pattern
* By using this container white box testing of a sparse disk becomes possible
*/
typedef struct {
rtems_sparse_disk sparse_disk;
rtems_sparse_disk_key keytable[STATIC_ALLOCATED_BLOCK_COUNT];
uint8_t data[STATIC_BLOCK_SIZE * STATIC_ALLOCATED_BLOCK_COUNT];
uint8_t pattern[STATIC_PATTERN_SIZE];
} sparse_disk_container;
/*
* Black box test the disk parameters of a sparse disk
*/
static void test_disk_params(
const int file_descriptor,
const uint32_t block_size,
const uint32_t media_block_size,
const rtems_blkdev_bnum block_number )
{
int rv;
uint32_t value = 0;
rtems_disk_device *fd_dd = NULL;
rtems_blkdev_bnum block_count = 0;
rv = rtems_disk_fd_get_media_block_size( file_descriptor, &value );
rtems_test_assert( 0 == rv );
rtems_test_assert( media_block_size == value );
value = 0;
rv = rtems_disk_fd_get_block_size( file_descriptor, &value );
rtems_test_assert( 0 == rv );
rtems_test_assert( block_size == value );
block_count = 0;
rv = rtems_disk_fd_get_block_count( file_descriptor, &block_count );
rtems_test_assert( 0 == rv );
rtems_test_assert( block_number == block_count );
rv = rtems_disk_fd_get_disk_device( file_descriptor, &fd_dd );
rtems_test_assert( 0 == rv );
rtems_test_assert( NULL != fd_dd );
}
/*
* Verify that writing to a sparse disk delivers expected results
*/
static void test_writing(
const int file_descriptor,
const uint32_t block_size,
const rtems_blkdev_bnum blocks_allocated )
{
int rv;
rtems_blkdev_bnum block_count = 0;
unsigned int byte_count;
off_t file_pos;
uint8_t buff[block_size];
/* Write a pattern to all allocated blocks */
for ( block_count = 0; block_count < blocks_allocated; block_count++ ) {
file_pos = (off_t) block_count * block_size;
rv = lseek( file_descriptor, file_pos, SEEK_SET );
rtems_test_assert( file_pos == rv );
rv = read( file_descriptor, buff, block_size );
rtems_test_assert( block_size == rv );
for ( byte_count = 0;
byte_count < ( block_size / sizeof( byte_count ) );
byte_count++ ) {
memcpy( buff + ( byte_count * sizeof( byte_count ) ), &byte_count,
sizeof( byte_count ) );
}
rv = lseek( file_descriptor, file_pos, SEEK_SET );
rtems_test_assert( file_pos == rv );
rv = write( file_descriptor, buff, block_size );
rtems_test_assert( block_size == rv );
}
}
/*
* Verify that black box reading for a sparse disk delivers expected results
*/
static void test_reading(
const int file_descriptor,
const uint32_t block_size,
const rtems_blkdev_bnum blocks_allocated,
const uint8_t fill_pattern )
{
int rv;
rtems_blkdev_bnum block_count = 0;
unsigned int byte_count;
off_t file_pos;
uint8_t buff[block_size];
uint32_t value = 0;
rv = fsync( file_descriptor );
rtems_test_assert( 0 == rv );
/* Read back the patterns */
for ( block_count = 0; block_count < blocks_allocated; block_count++ ) {
file_pos = (off_t) block_count * block_size;
value = lseek( file_descriptor, file_pos, SEEK_SET );
rtems_test_assert( file_pos == value );
rv = read( file_descriptor, &buff, block_size );
rtems_test_assert( block_size <= rv );
for ( byte_count = 0;
byte_count < ( block_size / sizeof( byte_count ) );
byte_count++ ) {
rv = memcmp( buff + ( byte_count * sizeof( byte_count ) ),
&byte_count,
sizeof( byte_count ) );
rtems_test_assert( 0 == rv );
}
}
/* Try to read from unallocated block */
file_pos = (off_t) block_count * block_size;
rv = lseek( file_descriptor, file_pos, SEEK_SET );
rtems_test_assert( file_pos == rv );
rv = read( file_descriptor, buff, block_size );
rtems_test_assert( block_size == rv );
for ( byte_count = 0; byte_count < block_size; ++byte_count )
rtems_test_assert( fill_pattern == buff[byte_count] );
}
/*
* Do black box io testing on a sparse disk
*/
static void test_device_io( const char *device_name,
const uint32_t block_size,
const uint32_t media_block_size,
const rtems_blkdev_bnum block_number,
const rtems_blkdev_bnum blocks_allocated,
const uint8_t fill_pattern )
{
int rv;
int file_descriptor;
file_descriptor = open( device_name, O_RDWR );
rtems_test_assert( 0 <= file_descriptor );
test_disk_params(
file_descriptor,
block_size,
media_block_size,
block_number
);
test_writing(
file_descriptor,
block_size,
blocks_allocated
);
test_reading(
file_descriptor,
block_size,
blocks_allocated,
fill_pattern
);
rv = close( file_descriptor );
rtems_test_assert( 0 == rv );
}
/*
* In white box testing verify the key table of the sparse disk is correct
*/
static void test_static_key_table(
const sparse_disk_container *disk_container,
const rtems_blkdev_bnum blocks_allocated,
const uint32_t block_size )
{
unsigned int i;
for ( i = 0; i < blocks_allocated; ++i ) {
rtems_test_assert( i == disk_container->keytable[i].block );
rtems_test_assert(
&disk_container->data[i * block_size]
== disk_container->keytable[i].data );
}
}
/*
* Verify the test pattern used in white box testing is as expected
*/
static void test_static_pattern(
const unsigned int pattern_size,
const uint8_t *pattern )
{
unsigned int i;
for ( i = 0; i < pattern_size; ++i )
rtems_test_assert( ( (uint8_t) ( pattern_size - 1 - i ) ) == pattern[i] );
}
/*
* Read write testing with a statically allocated disk. Thus white box testing can be done
*/
static void test_with_whitebox( const char *device_name )
{
rtems_status_code sc;
int rv;
unsigned int i;
sparse_disk_container disk_container;
int file_descriptor;
rtems_blkdev_bnum block_count = 0;
unsigned int byte_count;
uint8_t fill_pattern = 0;
memset( disk_container.data, 0, sizeof( disk_container.data ) );
memset( disk_container.keytable, 0, sizeof( disk_container.keytable ) );
for ( i = 0; i < STATIC_PATTERN_SIZE; ++i )
disk_container.pattern[i] = (uint8_t) ( STATIC_PATTERN_SIZE - 1 - i );
sc = rtems_sparse_disk_register(
"/dev/sda1",
&disk_container.sparse_disk,
STATIC_BLOCK_SIZE,
STATIC_ALLOCATED_BLOCK_COUNT,
STATIC_SIMULATED_BLOCK_COUNT,
fill_pattern,
NULL
);
rtems_test_assert( RTEMS_SUCCESSFUL == sc );
test_static_key_table(
&disk_container,
STATIC_ALLOCATED_BLOCK_COUNT,
STATIC_BLOCK_SIZE
);
for ( i = 0; i < ( STATIC_BLOCK_SIZE * STATIC_ALLOCATED_BLOCK_COUNT ); ++i )
rtems_test_assert( 0 == disk_container.data[i] );
test_static_pattern(
STATIC_PATTERN_SIZE,
&disk_container.pattern[0]
);
file_descriptor = open( device_name, O_RDWR );
rtems_test_assert( 0 <= file_descriptor );
test_disk_params(
file_descriptor,
STATIC_BLOCK_SIZE,
STATIC_BLOCK_SIZE,
STATIC_SIMULATED_BLOCK_COUNT
);
test_writing(
file_descriptor,
STATIC_BLOCK_SIZE,
STATIC_ALLOCATED_BLOCK_COUNT
);
test_reading(
file_descriptor,
STATIC_BLOCK_SIZE,
STATIC_ALLOCATED_BLOCK_COUNT,
fill_pattern
);
rv = close( file_descriptor );
rtems_test_assert( 0 == rv );
test_static_key_table(
&disk_container,
STATIC_ALLOCATED_BLOCK_COUNT,
STATIC_BLOCK_SIZE
);
for ( block_count = 0;
block_count < STATIC_ALLOCATED_BLOCK_COUNT;
block_count++ ) {
for ( byte_count = 0;
byte_count < ( STATIC_BLOCK_SIZE / sizeof( byte_count ) );
byte_count++ ) {
rv = memcmp( &disk_container.data[byte_count * sizeof( byte_count )],
&byte_count,
sizeof( byte_count ) );
rtems_test_assert( 0 == rv );
}
}
test_static_pattern(
STATIC_PATTERN_SIZE,
&disk_container.pattern[0]
);
}
/*
* The test sequence
*/
static
void test( void )
{
rtems_status_code sc;
int rv;
char device_name[] = "/dev/sda1";
uint32_t block_size;
rtems_blkdev_bnum block_number;
rtems_blkdev_bnum blocks_allocated;
int file_descriptor;
uint8_t fill_pattern = 0;
block_size = 512;
block_number = 4 * 2 * 1024;
blocks_allocated = 8;
sc = rtems_sparse_disk_create_and_register(
"/dev/sda1",
block_size,
blocks_allocated,
block_number,
fill_pattern
);
rtems_test_assert( RTEMS_SUCCESSFUL == sc );
/* Test reading and writing with sector size 512 and 8 such sectors
* allocated. Block size will default to 512 */
test_device_io(
device_name,
block_size,
block_size,
block_number,
blocks_allocated,
fill_pattern
);
file_descriptor = open( device_name, O_RDWR );
rtems_test_assert( 0 <= file_descriptor );
rv = rtems_disk_fd_set_block_size( file_descriptor,
blocks_allocated * block_size );
rtems_test_assert( 0 == rv );
rv = close( file_descriptor );
rtems_test_assert( 0 == rv );
/* Block size was increased to 4k. Thus all to allocated disk space
* corresponds to one block. Repeat the read write tests */
test_device_io(
device_name,
block_size * blocks_allocated,
block_size,
block_number,
1,
fill_pattern
);
rv = unlink( device_name );
rtems_test_assert( 0 == rv );
/* Do testing with a statically allocated disk. This permits white box
* testing */
test_with_whitebox( device_name );
}
static void Init( rtems_task_argument arg )
{
(void) arg;
TEST_BEGIN();
test();
TEST_END();
rtems_test_exit( 0 );
}
#define CONFIGURE_APPLICATION_NEEDS_CLOCK_DRIVER
#define CONFIGURE_APPLICATION_NEEDS_SIMPLE_CONSOLE_DRIVER
#define CONFIGURE_APPLICATION_NEEDS_LIBBLOCK
#define CONFIGURE_LIBIO_MAXIMUM_FILE_DESCRIPTORS 4
#define CONFIGURE_MAXIMUM_TASKS 1
#define CONFIGURE_MAXIMUM_SEMAPHORES 1
#define CONFIGURE_INIT_TASK_STACK_SIZE ( 16 * 1024 )
#define CONFIGURE_INITIAL_EXTENSIONS RTEMS_TEST_INITIAL_EXTENSION
#define CONFIGURE_RTEMS_INIT_TASKS_TABLE
#define CONFIGURE_INIT
#include <rtems/confdefs.h>