/* SPDX-License-Identifier: BSD-2-Clause */
/*! @file
* @brief Check how rtems_bdbuf_sync() works.
*
* Test sequence:
* -# Call rtems_bdbuf_read(#N) in thread #1.
* -# Call rtems_bdbuf_sync(#N) in thread #1.
* -# After a while disk driver gets write request for block #N.
* -# Call rtems_bdbuf_read(#N) from thread #2 (before reply from the driver).
* Thread #2 blocks on this call.
* -# Notify bdbuf library about write complete event.
* -# Check that rtems_bdbuf_sync(#N) in thread #1 unlocked after this.
* (in fact a thread to unlock might be any).
* -# Check that thread #2 unblocks and get buffer #N.
* -# Release buffer in thread #2.
* .
*
* Copyright (C) 2010 OKTET Labs, St.-Petersburg, Russia
* Author: Oleg Kravtsov <Oleg.Kravtsov@oktetlabs.ru>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "bdbuf_tests.h"
static rtems_task bdbuf_test4_2_thread1(rtems_task_argument arg);
static rtems_task bdbuf_test4_2_thread2(rtems_task_argument arg);
/* Block number used in the test */
#define TEST_BLK_NUM_N 114
void
bdbuf_test4_2_main()
{
bdbuf_test_msg msg;
TEST_START("Test 4.2");
START_THREAD(1, bdbuf_test4_2_thread1);
START_THREAD(2, bdbuf_test4_2_thread2);
/*
* Step 1:
* Call rtems_bdbuf_read(#N) in thread #1.
* Wait for read request in disk driver.
*/
WAIT_DRV_MSG(&msg);
SEND_DRV_MSG(0, 0, RTEMS_SUCCESSFUL, 0);
/*
* Step 2, 3:
* Call rtems_bdbuf_sync(#N) in thread #1.
* As the result buffer is asked to be flashed onto the disk.
*/
WAIT_DRV_MSG_WR(&msg);
TEST_CHECK_RESULT("3");
/*
* Step 4:
* Call rtems_bdbuf_read(#N) in thread #2
*/
CONTINUE_THREAD(2);
/* Make sure that thread #2 blocks */
CHECK_THREAD_BLOCKED(2);
/*
* Step 5:
* Notify bdbuf library about write complete event.
*/
SEND_DRV_MSG(0, 0, RTEMS_SUCCESSFUL, 0);
/* Check that rtems_bdbuf_sync() is unlocked in thread #1 */
WAIT_THREAD_SYNC(1);
/*
* Step 7:
* Check that rtems_bdbuf_read(#N) call is unlocked in thread #2.
*/
WAIT_THREAD_SYNC(2);
TEST_CHECK_RESULT("7");
/*
* Step 8:
* Release buffer in thread #2
*/
CONTINUE_THREAD(2);
/* Exit from thread #1 */
CONTINUE_THREAD(1);
TEST_STOP();
}
static rtems_task
bdbuf_test4_2_thread1(rtems_task_argument arg)
{
rtems_status_code rc;
rtems_bdbuf_buffer *bd = NULL;
/*
* Step 1:
* Call rtems_bdbuf_read(#N) in thread #1;
*/
rc = rtems_bdbuf_read(test_dd, TEST_BLK_NUM_N, &bd);
if (rc != RTEMS_SUCCESSFUL)
{
TEST_FAILED();
}
/*
* Step 2:
* Call rtems_bdbuf_sync(#N)
*/
rc = rtems_bdbuf_sync(bd);
if (rc != RTEMS_SUCCESSFUL)
{
TEST_FAILED();
}
CONTINUE_MAIN(1);
THREAD_END();
}
static rtems_task
bdbuf_test4_2_thread2(rtems_task_argument arg)
{
rtems_status_code rc;
rtems_bdbuf_buffer *bd = NULL;
WAIT_MAIN_SYNC(2);
/*
* Step 4:
* In thread #2 call read(#N).
* We will block on this call.
*/
rc = rtems_bdbuf_read(test_dd, TEST_BLK_NUM_N, &bd);
if (rc != RTEMS_SUCCESSFUL)
{
TEST_FAILED();
}
CONTINUE_MAIN(2);
/*
* Release buffer.
*/
rc = rtems_bdbuf_release(bd);
if (rc != RTEMS_SUCCESSFUL)
{
TEST_FAILED();
}
THREAD_END();
}