/* SPDX-License-Identifier: BSD-2-Clause */
/*! @file
* @brief Check how read/release work in case of only one buffer in ready list.
*
* Test sequence:
* -# In thread #1 call rtems_bdbuf_get(#N) to get an empty block #N.
* -# In thread #1 call rtems_bdbuf_release_modified() for previously
* got buffer.
* -# In thread #1 call rtems_bdbuf_read(#N) to get the same buffer
* (after this call a buffer is in AVL tree with ACCESS_MODIFIED state).
* -# In thread #2 call rtems_bdbuf_read/get(#M).
* -# In thread #1 call rtems_bdbuf_release(#N).
* -# Check that in thread #2 a buffer is obtained.
*
* Copyright (C) 2010 OKTET Labs, St.-Petersburg, Russia
* Author: Oleg Kravtsov <Oleg.Kravtsov@oktetlabs.ru>
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include "bdbuf_tests.h"
static rtems_task bdbuf_test3_1_thread1(rtems_task_argument arg);
static rtems_task bdbuf_test3_1_thread2(rtems_task_argument arg);
/* Block number used in the test */
#define TEST_BLK_NUM_N 80
#define TEST_BLK_NUM_M 85
void
bdbuf_test3_1_main()
{
bdbuf_test_msg msg;
TEST_START("Test 3.1");
START_THREAD(1, bdbuf_test3_1_thread1);
START_THREAD(2, bdbuf_test3_1_thread2);
/*
* Step 1-3:
* Wait for sync from thread #1.
* Thread #1 switch a buffer for #N into ACCESS_MODIFIED state.
*/
WAIT_THREAD_SYNC(1);
TEST_CHECK_RESULT("3");
/*
* Step 4:
* Thread #2 calls get() function and blocks
* (there no buffers available in bdbuf library).
*/
CONTINUE_THREAD(2);
/* Make sure thread #2 managed to block on the buffer. */
CHECK_THREAD_BLOCKED(2);
/*
* Step 6:
* Thread #1 release buffer.
*/
CONTINUE_THREAD(1);
/*
* Buffer released in thread #1 was in MODIFIED state, so
* there will be a request for disk write
*/
WAIT_DRV_MSG_WR(&msg);
SEND_DRV_MSG(0, 0, RTEMS_SUCCESSFUL, 0);
/*
* Check that thread #2 unblocked after this.
*/
WAIT_THREAD_SYNC(2);
TEST_CHECK_RESULT("5");
/*
* Release buffer in thread #2
*/
CONTINUE_THREAD(2);
/*
* Buffer released in thread #2 switched to MODIFIED state, so
* there will be a request for disk write
*/
WAIT_DRV_MSG_WR(&msg);
SEND_DRV_MSG(0, 0, RTEMS_SUCCESSFUL, 0);
TEST_STOP();
}
static rtems_task
bdbuf_test3_1_thread1(rtems_task_argument arg)
{
rtems_status_code rc;
rtems_bdbuf_buffer *bd = NULL;
/*
* Step 1:
* Call rtems_bdbuf_get(#N) to get an empty block db;
* [this call will remove a buffer from ready list and insert
* it in AVL tree with ACCESS state.
* Step 2:
* Call release_modified(bd);
* [Now we have one entry in modified list and it is still
* in AVL tree with MODIFIED state]
* Step 3:
* Call read(#N) to get the same buffer.
* [An entry is found in AVL tree, removed from modified list and
* returned with state ACCESS_MODIFIED]
*/
rc = rtems_bdbuf_get(test_dd, TEST_BLK_NUM_N, &bd);
if (rc != RTEMS_SUCCESSFUL)
{
TEST_FAILED();
}
rc = rtems_bdbuf_release_modified(bd);
if (rc != RTEMS_SUCCESSFUL)
{
TEST_FAILED();
}
rc = rtems_bdbuf_read(test_dd, TEST_BLK_NUM_N, &bd);
if (rc != RTEMS_SUCCESSFUL)
{
TEST_FAILED();
}
CONTINUE_MAIN(1);
/* Step 5:
* Call rtems_bdbuf_release(#N).
* As the result buffer will be used by bdbuf to get
* buffer #M for thread #2.
*/
rc = rtems_bdbuf_release(bd);
if (rc != RTEMS_SUCCESSFUL)
{
TEST_FAILED();
}
THREAD_END();
}
static rtems_task
bdbuf_test3_1_thread2(rtems_task_argument arg)
{
rtems_status_code rc;
rtems_bdbuf_buffer *bd = NULL;
WAIT_MAIN_SYNC(2);
/*
* Step 4:
* In thread #2 call read/get(#M)
* [We ask for block number #M - there is no such entry in AVL,
* and all the lists are empty (ready, lru, modified), as a result
* this thread blocks on
* rtems_bdbuf_wait(pool, &pool->waiting, &pool->wait_waiters)]
*/
rc = rtems_bdbuf_get(test_dd, TEST_BLK_NUM_M, &bd);
if (rc != RTEMS_SUCCESSFUL)
{
TEST_FAILED();
}
CONTINUE_MAIN(2);
/*
* Release buffer.
*/
rc = rtems_bdbuf_release_modified(bd);
if (rc != RTEMS_SUCCESSFUL)
{
TEST_FAILED();
}
THREAD_END();
}
