/* cpu.h
*
* This include file contains information pertaining to the PowerPC
* processor.
*
* Author: Andrew Bray <andy@i-cubed.co.uk>
*
* COPYRIGHT (c) 1995 by i-cubed ltd.
*
* To anyone who acknowledges that this file is provided "AS IS"
* without any express or implied warranty:
* permission to use, copy, modify, and distribute this file
* for any purpose is hereby granted without fee, provided that
* the above copyright notice and this notice appears in all
* copies, and that the name of i-cubed limited not be used in
* advertising or publicity pertaining to distribution of the
* software without specific, written prior permission.
* i-cubed limited makes no representations about the suitability
* of this software for any purpose.
*
* Derived from c/src/exec/cpu/no_cpu/cpu.h:
*
* COPYRIGHT (c) 1989-1997.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may in
* the file LICENSE in this distribution or at
* http://www.rtems.com/license/LICENSE.
*
* $Id$
*/
#ifndef _RTEMS_OLD_EXCEPTIONS_CPU_H
#define _RTEMS_OLD_EXCEPTIONS_CPU_H
#ifndef _RTEMS_SCORE_CPU_H
#error "You should include <rtems/score/cpu.h>"
#endif
#ifdef __cplusplus
extern "C" {
#endif
#ifndef ASM
struct CPU_Interrupt_frame;
typedef void ( *ppc_isr_entry )( int, struct CPU_Interrupt_frame * );
#endif
/* conditional compilation parameters */
/*
* Does RTEMS manage a dedicated interrupt stack in software?
*
* If TRUE, then a stack is allocated in _ISR_Handler_initialization.
* If FALSE, nothing is done.
*
* If the CPU supports a dedicated interrupt stack in hardware,
* then it is generally the responsibility of the BSP to allocate it
* and set it up.
*
* If the CPU does not support a dedicated interrupt stack, then
* the porter has two options: (1) execute interrupts on the
* stack of the interrupted task, and (2) have RTEMS manage a dedicated
* interrupt stack.
*
* If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE.
*
* Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and
* CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is
* possible that both are FALSE for a particular CPU. Although it
* is unclear what that would imply about the interrupt processing
* procedure on that CPU.
*/
#define CPU_HAS_SOFTWARE_INTERRUPT_STACK FALSE
/*
* Does this CPU have hardware support for a dedicated interrupt stack?
*
* If TRUE, then it must be installed during initialization.
* If FALSE, then no installation is performed.
*
* If this is TRUE, CPU_ALLOCATE_INTERRUPT_STACK should also be TRUE.
*
* Only one of CPU_HAS_SOFTWARE_INTERRUPT_STACK and
* CPU_HAS_HARDWARE_INTERRUPT_STACK should be set to TRUE. It is
* possible that both are FALSE for a particular CPU. Although it
* is unclear what that would imply about the interrupt processing
* procedure on that CPU.
*/
/*
* ACB: This is a lie, but it gets us a handle on a call to set up
* a variable derived from the top of the interrupt stack.
*/
#define CPU_HAS_HARDWARE_INTERRUPT_STACK TRUE
/*
* Does RTEMS allocate a dedicated interrupt stack in the Interrupt Manager?
*
* If TRUE, then the memory is allocated during initialization.
* If FALSE, then the memory is allocated during initialization.
*
* This should be TRUE is CPU_HAS_SOFTWARE_INTERRUPT_STACK is TRUE
* or CPU_INSTALL_HARDWARE_INTERRUPT_STACK is TRUE.
*/
#define CPU_ALLOCATE_INTERRUPT_STACK TRUE
/*
* Does the RTEMS invoke the user's ISR with the vector number and
* a pointer to the saved interrupt frame (1) or just the vector
* number (0)?
*/
#define CPU_ISR_PASSES_FRAME_POINTER 1
/*
* Should the saving of the floating point registers be deferred
* until a context switch is made to another different floating point
* task?
*
* If TRUE, then the floating point context will not be stored until
* necessary. It will remain in the floating point registers and not
* disturned until another floating point task is switched to.
*
* If FALSE, then the floating point context is saved when a floating
* point task is switched out and restored when the next floating point
* task is restored. The state of the floating point registers between
* those two operations is not specified.
*
* If the floating point context does NOT have to be saved as part of
* interrupt dispatching, then it should be safe to set this to TRUE.
*
* Setting this flag to TRUE results in using a different algorithm
* for deciding when to save and restore the floating point context.
* The deferred FP switch algorithm minimizes the number of times
* the FP context is saved and restored. The FP context is not saved
* until a context switch is made to another, different FP task.
* Thus in a system with only one FP task, the FP context will never
* be saved or restored.
*/
/*
* ACB Note: This could make debugging tricky..
*/
#define CPU_USE_DEFERRED_FP_SWITCH TRUE
/*
* The following defines the number of bits actually used in the
* interrupt field of the task mode. How those bits map to the
* CPU interrupt levels is defined by the routine _CPU_ISR_Set_level().
*
* The interrupt level is bit mapped for the PowerPC family. The
* bits are set to 0 to indicate that a particular exception source
* enabled and 1 if it is disabled. This keeps with RTEMS convention
* that interrupt level 0 means all sources are enabled.
*
* The bits are assigned to correspond to enable bits in the MSR.
*/
#define PPC_INTERRUPT_LEVEL_ME 0x01
#define PPC_INTERRUPT_LEVEL_EE 0x02
#define PPC_INTERRUPT_LEVEL_CE 0x04
/* XXX should these be maskable? */
#if 0
#define PPC_INTERRUPT_LEVEL_DE 0x08
#define PPC_INTERRUPT_LEVEL_BE 0x10
#define PPC_INTERRUPT_LEVEL_SE 0x20
#endif
#define CPU_MODES_INTERRUPT_MASK 0x00000007
/*
* Processor defined structures required for cpukit/score.
*/
#ifndef ASM
/*
* The following table contains the information required to configure
* the PowerPC processor specific parameters.
*/
typedef struct {
void (*pretasking_hook)( void );
void (*predriver_hook)( void );
void (*postdriver_hook)( void );
void (*idle_task)( void );
boolean do_zero_of_workspace;
uint32_t idle_task_stack_size;
uint32_t interrupt_stack_size;
uint32_t extra_mpci_receive_server_stack;
void * (*stack_allocate_hook)( uint32_t );
void (*stack_free_hook)( void* );
/* end of fields required on all CPUs */
uint32_t clicks_per_usec; /* Timer clicks per microsecond */
void (*spurious_handler)(uint32_t vector, CPU_Interrupt_frame *);
boolean exceptions_in_RAM; /* TRUE if in RAM */
#if (defined(ppc403) || defined(ppc405) \
|| defined(mpc860) || defined(mpc821) || defined(mpc8260))
uint32_t serial_per_sec; /* Serial clocks per second */
boolean serial_external_clock;
boolean serial_xon_xoff;
boolean serial_cts_rts;
uint32_t serial_rate;
uint32_t timer_average_overhead; /* Average overhead of timer in ticks */
uint32_t timer_least_valid; /* Least valid number from timer */
boolean timer_internal_clock; /* TRUE, when timer runs with CPU clk */
#endif
#if (defined(mpc555) \
|| defined(mpc860) || defined(mpc821) || defined(mpc8260))
uint32_t clock_speed; /* Speed of CPU in Hz */
#endif
} rtems_cpu_table;
#endif
/*
* Macros to access required entires in the CPU Table are in
* the file rtems/system.h.
*/
/*
* Macros to access PowerPC specific additions to the CPU Table
*/
#ifndef ASM
#define rtems_cpu_configuration_get_spurious_handler() \
(_CPU_Table.spurious_handler)
#endif /* ASM */
/*
* The following type defines an entry in the PPC's trap table.
*
* NOTE: The instructions chosen are RTEMS dependent although one is
* obligated to use two of the four instructions to perform a
* long jump. The other instructions load one register with the
* trap type (a.k.a. vector) and another with the psr.
*/
#ifndef ASM
typedef struct {
uint32_t stwu_r1; /* stwu %r1, -(??+IP_END)(%1)*/
uint32_t stw_r0; /* stw %r0, IP_0(%r1) */
uint32_t li_r0_IRQ; /* li %r0, _IRQ */
uint32_t b_Handler; /* b PROC (_ISR_Handler) */
} CPU_Trap_table_entry;
#endif
/*
* This variable is optional. It is used on CPUs on which it is difficult
* to generate an "uninitialized" FP context. It is filled in by
* _CPU_Initialize and copied into the task's FP context area during
* _CPU_Context_Initialize.
*/
#ifndef ASM
/* EXTERN Context_Control_fp _CPU_Null_fp_context; */
#endif
/*
* On some CPUs, RTEMS supports a software managed interrupt stack.
* This stack is allocated by the Interrupt Manager and the switch
* is performed in _ISR_Handler. These variables contain pointers
* to the lowest and highest addresses in the chunk of memory allocated
* for the interrupt stack. Since it is unknown whether the stack
* grows up or down (in general), this give the CPU dependent
* code the option of picking the version it wants to use.
*
* NOTE: These two variables are required if the macro
* CPU_HAS_SOFTWARE_INTERRUPT_STACK is defined as TRUE.
*/
#ifndef ASM
SCORE_EXTERN void *_CPU_Interrupt_stack_low;
SCORE_EXTERN void *_CPU_Interrupt_stack_high;
#endif
/*
* With some compilation systems, it is difficult if not impossible to
* call a high-level language routine from assembly language. This
* is especially true of commercial Ada compilers and name mangling
* C++ ones. This variable can be optionally defined by the CPU porter
* and contains the address of the routine _Thread_Dispatch. This
* can make it easier to invoke that routine at the end of the interrupt
* sequence (if a dispatch is necessary).
*/
#ifndef ASM
/* EXTERN void (*_CPU_Thread_dispatch_pointer)(); */
#endif
/*
* Nothing prevents the porter from declaring more CPU specific variables.
*/
#ifndef ASM
SCORE_EXTERN struct {
uint32_t volatile* Nest_level;
uint32_t volatile* Disable_level;
void *Vector_table;
void *Stack;
uint32_t Default_r2;
uint32_t Default_r13;
volatile boolean *Switch_necessary;
boolean *Signal;
uint32_t msr_initial;
} _CPU_IRQ_info CPU_STRUCTURE_ALIGNMENT;
#endif
/*
* The size of the floating point context area. On some CPUs this
* will not be a "sizeof" because the format of the floating point
* area is not defined -- only the size is. This is usually on
* CPUs with a "floating point save context" instruction.
*/
#define CPU_CONTEXT_FP_SIZE sizeof( Context_Control_fp )
/*
* (Optional) # of bytes for libmisc/stackchk to check
* If not specifed, then it defaults to something reasonable
* for most architectures.
*/
#define CPU_STACK_CHECK_SIZE (128)
/*
* Amount of extra stack (above minimum stack size) required by
* MPCI receive server thread. Remember that in a multiprocessor
* system this thread must exist and be able to process all directives.
*/
#define CPU_MPCI_RECEIVE_SERVER_EXTRA_STACK 0
/*
* This defines the number of entries in the ISR_Vector_table managed
* by RTEMS.
*/
#define CPU_INTERRUPT_NUMBER_OF_VECTORS (PPC_INTERRUPT_MAX)
#define CPU_INTERRUPT_MAXIMUM_VECTOR_NUMBER (PPC_INTERRUPT_MAX - 1)
/*
* This is defined if the port has a special way to report the ISR nesting
* level. Most ports maintain the variable _ISR_Nest_level.
*/
#define CPU_PROVIDES_ISR_IS_IN_PROGRESS TRUE
/*
* ISR handler macros
*/
#ifndef ASM
void _CPU_Initialize_vectors(void);
#endif
/*
* Disable all interrupts for an RTEMS critical section. The previous
* level is returned in _isr_cookie.
*/
#ifndef ASM
extern const unsigned int _PPC_MSR_DISABLE_MASK;
#define _CPU_MSR_GET( _msr_value ) \
do { \
_msr_value = 0; \
asm volatile ("mfmsr %0" : "=&r" ((_msr_value)) : "0" ((_msr_value))); \
} while (0)
/* FIXME: Backward compatibility
* new-exception-processing uses _CPU_MSR_GET
* old-exception-processing had used _CPU_MSR_Value
*/
#define _CPU_MSR_Value(_msr_value) _CPU_MSR_GET(_msr_value)
#define _CPU_MSR_SET( _msr_value ) \
{ asm volatile ("mtmsr %0" : "=&r" ((_msr_value)) : "0" ((_msr_value))); }
#if 0
#define _CPU_ISR_Disable( _isr_cookie ) \
{ register unsigned int _disable_mask = _PPC_MSR_DISABLE_MASK; \
_isr_cookie = 0; \
asm volatile (
"mfmsr %0" : \
"=r" ((_isr_cookie)) : \
"0" ((_isr_cookie)) \
); \
asm volatile (
"andc %1,%0,%1" : \
"=r" ((_isr_cookie)), "=&r" ((_disable_mask)) : \
"0" ((_isr_cookie)), "1" ((_disable_mask)) \
); \
asm volatile (
"mtmsr %1" : \
"=r" ((_disable_mask)) : \
"0" ((_disable_mask)) \
); \
}
#endif
#define _CPU_ISR_Disable( _isr_cookie ) \
{ register unsigned int _disable_mask = _PPC_MSR_DISABLE_MASK; \
_isr_cookie = 0; \
asm volatile ( \
"mfmsr %0; andc %1,%0,%1; mtmsr %1" : \
"=&r" ((_isr_cookie)), "=&r" ((_disable_mask)) : \
"0" ((_isr_cookie)), "1" ((_disable_mask)) \
); \
}
#endif
/*
* Enable interrupts to the previous level (returned by _CPU_ISR_Disable).
* This indicates the end of an RTEMS critical section. The parameter
* _isr_cookie is not modified.
*/
#ifndef ASM
#define _CPU_ISR_Enable( _isr_cookie ) \
{ \
asm volatile ( "mtmsr %0" : \
"=r" ((_isr_cookie)) : \
"0" ((_isr_cookie))); \
}
#endif
/*
* This temporarily restores the interrupt to _isr_cookie before immediately
* disabling them again. This is used to divide long RTEMS critical
* sections into two or more parts. The parameter _isr_cookie is not
* modified.
*
* NOTE: The version being used is not very optimized but it does
* not trip a problem in gcc where the disable mask does not
* get loaded. Check this for future (post 10/97 gcc versions.
*/
#ifndef ASM
#define _CPU_ISR_Flash( _isr_cookie ) \
{ register unsigned int _disable_mask = _PPC_MSR_DISABLE_MASK; \
asm volatile ( \
"mtmsr %0; andc %1,%0,%1; mtmsr %1" : \
"=r" ((_isr_cookie)), "=r" ((_disable_mask)) : \
"0" ((_isr_cookie)), "1" ((_disable_mask)) \
); \
}
#endif
/*
* Map interrupt level in task mode onto the hardware that the CPU
* actually provides. Currently, interrupt levels which do not
* map onto the CPU in a generic fashion are undefined. Someday,
* it would be nice if these were "mapped" by the application
* via a callout. For example, m68k has 8 levels 0 - 7, levels
* 8 - 255 would be available for bsp/application specific meaning.
* This could be used to manage a programmable interrupt controller
* via the rtems_task_mode directive.
*/
#ifndef ASM
uint32_t _CPU_ISR_Calculate_level(
uint32_t new_level
);
void _CPU_ISR_Set_level(
uint32_t new_level
);
uint32_t _CPU_ISR_Get_level( void );
void _CPU_ISR_install_raw_handler(
uint32_t vector,
proc_ptr new_handler,
proc_ptr *old_handler
);
#endif
/* end of ISR handler macros */
/* Fatal Error manager macros */
/*
* This routine copies _error into a known place -- typically a stack
* location or a register, optionally disables interrupts, and
* halts/stops the CPU.
*/
#define _CPU_Fatal_halt( _error ) \
_CPU_Fatal_error(_error)
/* end of Fatal Error manager macros */
#ifdef __cplusplus
}
#endif
#endif