/*
* Opencore Or1k CPU Dependent Source
*
*
* COPYRIGHT (c) 1989-1999.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.com/license/LICENSE.
*
* This file adapted from no_bsp board library of the RTEMS distribution.
* The body has been modified for the Bender Or1k implementation by
* Chris Ziomkowski. <chris@asics.ws>
*/
#include <rtems/system.h>
#include <rtems/score/isr.h>
#include <rtems/score/wkspace.h>
/* _CPU_Initialize
*
* This routine performs processor dependent initialization.
*
* INPUT PARAMETERS:
* cpu_table - CPU table to initialize
* thread_dispatch - address of disptaching routine
*
*/
void _CPU_Initialize(
rtems_cpu_table *cpu_table,
void (*thread_dispatch)
)
{
/*
* The thread_dispatch argument is the address of the entry point
* for the routine called at the end of an ISR once it has been
* decided a context switch is necessary. On some compilation
* systems it is difficult to call a high-level language routine
* from assembly. This allows us to trick these systems.
*
* If you encounter this problem save the entry point in a CPU
* dependent variable.
*/
_CPU_Thread_dispatch_pointer = thread_dispatch;
/*
* If there is not an easy way to initialize the FP context
* during Context_Initialize, then it is usually easier to
* save an "uninitialized" FP context here and copy it to
* the task's during Context_Initialize.
*/
/* FP context initialization support goes here */
_CPU_Table = *cpu_table;
}
/*PAGE
*
* _CPU_ISR_Get_level
*
* or1k Specific Information:
*
* There are only 2 interrupt levels for the or1k architecture.
* Either interrupts are enabled or disabled. They are considered
* enabled if both exceptions are enabled (SR_EXR) and interrupts
* are enabled (SR_EIR). If either of these conditions are not
* met, interrupts are disabled, and a level of 1 is returned.
*/
inline uint32_t _CPU_ISR_Get_level( void )
{
register uint32_t sr;
asm("l.mfspr %0,r0,0x17" : "=r" (sr));
return !((sr & SR_EXR) && (sr & SR_EIR));
}
/*PAGE
*
* _CPU_ISR_install_raw_handler
*
* or1k Specific Information:
*
* As a general rule the following is done for interrupts:
*
* For normal exceptions, exceptions are immediately reenabled
* by setting the SR_EXR bit. For interrupt exceptions, the
* SR_EIR bit is first cleared, and then exceptions are reenabled.
*/
void _CPU_ISR_install_raw_handler(
uint32_t vector,
proc_ptr new_handler,
proc_ptr *old_handler
)
{
register uint32_t sr;
register uint32_t tmp;
extern uint32_t Or1k_Interrupt_Vectors[];
asm volatile ("l.mfspr %0,r0,0x11\n\t"
"l.addi %1,r0,-5\n\t"
"l.and %1,%1,%0\n\t": "=r" (sr) : "r" (tmp));
*old_handler = *((proc_ptr*)&Or1k_Interrupt_Vectors[vector]);
*((proc_ptr*)&Or1k_Interrupt_Vectors[vector]) = new_handler;
asm volatile ("l.mtspr r0,%0,0x11\n\t":: "r" (sr));
}
/*PAGE
*
* _CPU_ISR_install_vector
*
* This kernel routine installs the RTEMS handler for the
* specified vector.
*
* Input parameters:
* vector - interrupt vector number
* old_handler - former ISR for this vector number
* new_handler - replacement ISR for this vector number
*
* Output parameters: NONE
*
*
* NO_CPU Specific Information:
*
* XXX document implementation including references if appropriate
*/
void _CPU_ISR_install_vector(
uint32_t vector,
proc_ptr new_handler,
proc_ptr *old_handler
)
{
*old_handler = _ISR_Vector_table[ vector ];
/*
* If the interrupt vector table is a table of pointer to isr entry
* points, then we need to install the appropriate RTEMS interrupt
* handler for this vector number.
*/
_CPU_ISR_install_raw_handler( vector, new_handler, old_handler );
/*
* We put the actual user ISR address in '_ISR_vector_table'. This will
* be used by the _ISR_Handler so the user gets control.
*/
_ISR_Vector_table[ vector ] = new_handler;
}
/*PAGE
*
* _CPU_Install_interrupt_stack
*
* We don't use a separate interrupt stack.
*
*/
void _CPU_Install_interrupt_stack( void )
{
}
/*PAGE
*
* _CPU_Thread_Idle_body
*
* NOTES:
*
* 1. This is the same as the regular CPU independent algorithm.
*
* 2. If you implement this using a "halt", "idle", or "shutdown"
* instruction, then don't forget to put it in an infinite loop.
*
* 3. Be warned. Some processors with onboard DMA have been known
* to stop the DMA if the CPU were put in IDLE mode. This might
* also be a problem with other on-chip peripherals. So use this
* hook with caution.
*
*/
void _CPU_Thread_Idle_body( void )
{
for( ; ; )
/* insert your "halt" instruction here */ ;
}