blob: 4592e8ced3cae73be63cb07949be9b46d56d49c3 (
plain) (
tree)
|
|
/**
* @file
*
* @brief M32C CPU Dependent Source
*/
/*
* COPYRIGHT (c) 1989-1999.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.org/license/LICENSE.
*/
#ifdef HAVE_CONFIG_H
#include "config.h"
#endif
#include <rtems/system.h>
#include <rtems/score/isr.h>
#include <varvects.h>
/* _CPU_Initialize
*
* This routine performs processor dependent initialization.
*
* INPUT PARAMETERS: NONE
*
* NO_CPU Specific Information:
*
* XXX document implementation including references if appropriate
*/
void _CPU_Initialize(void)
{
#if !defined(__r8c_cpu__)
__asm__ volatile( "ldc #__var_vects,intb" );
#endif
}
/*
* This routine returns the current interrupt level.
*
* NO_CPU Specific Information:
*
* XXX document implementation including references if appropriate
*/
uint32_t _CPU_ISR_Get_level( void )
{
int flag;
m32c_get_flg( flag );
return ((flag & 0x40) ? 0 : 1);
}
/*
* _CPU_ISR_install_raw_handler
*
* NO_CPU Specific Information:
*
* XXX document implementation including references if appropriate
*/
void _CPU_ISR_install_raw_handler(
uint32_t vector,
proc_ptr new_handler,
proc_ptr *old_handler
)
{
/*
* This is where we install the interrupt handler into the "raw" interrupt
* table used by the CPU to dispatch interrupt handlers.
*/
#if defined(__r8c_cpu__)
#warning "_CPU_ISR_install_raw_handler not implemented on R8C"
#else
_set_var_vect(new_handler,vector);
#endif
}
/*
* _CPU_ISR_install_vector
*
* NO_CPU Specific Information:
*
* XXX document implementation including references if appropriate
*/
void _CPU_ISR_install_vector(
uint32_t vector,
proc_ptr new_handler,
proc_ptr *old_handler
)
{
*old_handler = _ISR_Vector_table[ vector ];
/*
* If the interrupt vector table is a table of pointer to isr entry
* points, then we need to install the appropriate RTEMS interrupt
* handler for this vector number.
*/
_CPU_ISR_install_raw_handler( vector, new_handler, old_handler );
/*
* We put the actual user ISR address in '_ISR_vector_table'. This will
* be used by the _ISR_Handler so the user gets control.
*/
_ISR_Vector_table[ vector ] = new_handler;
}
/*
* _CPU_Install_interrupt_stack
*
* NO_CPU Specific Information:
*
* XXX document implementation including references if appropriate
*/
void _CPU_Install_interrupt_stack( void )
{
}
/*
* _CPU_Thread_Idle_body
*
* NOTES:
*
* 1. This is the same as the regular CPU independent algorithm.
*
* 2. If you implement this using a "halt", "idle", or "shutdown"
* instruction, then don't forget to put it in an infinite loop.
*
* 3. Be warned. Some processors with onboard DMA have been known
* to stop the DMA if the CPU were put in IDLE mode. This might
* also be a problem with other on-chip peripherals. So use this
* hook with caution.
*
* NO_CPU Specific Information:
*
* XXX document implementation including references if appropriate
*/
void *_CPU_Thread_Idle_body( uintptr_t ignored )
{
for( ; ; )
/* insert your "halt" instruction here */ ;
}
|