blob: 2fecc9279d68ea22f605a5270b6b8e4c2501eba0 (
plain) (
tree)
|
|
/* Blackfin CPU Dependent Source
*
* Copyright (c) 2006 by Atos Automacao Industrial Ltda.
* written by Alain Schaefer <alain.schaefer@easc.ch>
* and Antonio Giovanini <antonio@atos.com.br>
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.com/license/LICENSE.
*
* $Id$
*/
#include <rtems/system.h>
#include <rtems/score/isr.h>
#include <rtems/score/wkspace.h>
#include <rtems/score/bfin.h>
#include <rtems/bfin/bfin.h>
/* _CPU_Initialize
*
* This routine performs processor dependent initialization.
*
* INPUT PARAMETERS:
* thread_dispatch - address of disptaching routine
*
* NO_CPU Specific Information:
*
* XXX document implementation including references if appropriate
*/
void _CPU_Initialize(
void (*thread_dispatch) /* ignored on this CPU */
)
{
/*
* The thread_dispatch argument is the address of the entry point
* for the routine called at the end of an ISR once it has been
* decided a context switch is necessary. On some compilation
* systems it is difficult to call a high-level language routine
* from assembly. This allows us to trick these systems.
*
* If you encounter this problem save the entry point in a CPU
* dependent variable.
*/
_CPU_Thread_dispatch_pointer = thread_dispatch;
/*
* If there is not an easy way to initialize the FP context
* during Context_Initialize, then it is usually easier to
* save an "uninitialized" FP context here and copy it to
* the task's during Context_Initialize.
*/
/* FP context initialization support goes here */
}
/*PAGE
*
* _CPU_ISR_Get_level
*
* NO_CPU Specific Information:
*
* XXX document implementation including references if appropriate
*/
uint32_t _CPU_ISR_Get_level( void )
{
/*
* This routine returns the current interrupt level.
*/
register uint32_t _tmpimask;
/*read from the IMASK registers*/
_tmpimask = *((uint32_t*)IMASK);
return _tmpimask;
}
/*PAGE
*
* _CPU_ISR_install_raw_handler
*
* NO_CPU Specific Information:
*
* XXX document implementation including references if appropriate
*/
void _CPU_ISR_install_raw_handler(
uint32_t vector,
proc_ptr new_handler,
proc_ptr *old_handler
)
{
proc_ptr *interrupt_table = NULL;
/*
* This is where we install the interrupt handler into the "raw" interrupt
* table used by the CPU to dispatch interrupt handlers.
*/
/* base of vector table on blackfin architecture */
interrupt_table = (void*)0xFFE02000;
*old_handler = interrupt_table[ vector ];
interrupt_table[ vector ] = new_handler;
}
/*PAGE
*
* _CPU_ISR_install_vector
*
* This kernel routine installs the RTEMS handler for the
* specified vector.
*
* Input parameters:
* vector - interrupt vector number
* old_handler - former ISR for this vector number
* new_handler - replacement ISR for this vector number
*
* Output parameters: NONE
*
*
* NO_CPU Specific Information:
*
* XXX document implementation including references if appropriate
*/
void _CPU_ISR_install_vector(
uint32_t vector,
proc_ptr new_handler,
proc_ptr *old_handler
)
{
*old_handler = _ISR_Vector_table[ vector ];
/*
* If the interrupt vector table is a table of pointer to isr entry
* points, then we need to install the appropriate RTEMS interrupt
* handler for this vector number.
*/
_CPU_ISR_install_raw_handler( vector, _ISR_Handler, old_handler );
/*
* We put the actual user ISR address in '_ISR_vector_table'. This will
* be used by the _ISR_Handler so the user gets control.
*/
_ISR_Vector_table[ vector ] = new_handler;
}
/*
* Copied from the arm port.
*/
void _CPU_Context_Initialize(
Context_Control *the_context,
uint32_t *stack_base,
uint32_t size,
uint32_t new_level,
void *entry_point,
boolean is_fp
)
{
uint32_t stack_high; /* highest "stack aligned" address */
stack_high = ((uint32_t )(stack_base) + size);
the_context->register_sp = stack_high;
// gcc/config/bfin/bfin.h defines CPU_MINIMUM_STACK_FRAME_SIZE = 0 thus we do sp=fp
// is this correct ?????
the_context->register_fp = stack_high;
the_context->register_rets = (uint32_t) entry_point;
//mask the interrupt level
}
/*PAGE
*
* _CPU_Install_interrupt_stack
*
* NO_CPU Specific Information:
*
* XXX document implementation including references if appropriate
*/
void _CPU_Install_interrupt_stack( void )
{
}
|
