/*
* Rate Monotonic Manager - Period Blocking and Status
*
* COPYRIGHT (c) 1989-2009.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.com/license/LICENSE.
*
* $Id$
*/
#if HAVE_CONFIG_H
#include "config.h"
#endif
#include <rtems/system.h>
#include <rtems/rtems/status.h>
#include <rtems/rtems/support.h>
#include <rtems/score/isr.h>
#include <rtems/score/object.h>
#include <rtems/rtems/ratemon.h>
#include <rtems/score/thread.h>
void _Rate_monotonic_Initiate_statistics(
Rate_monotonic_Control *the_period
)
{
Thread_Control *owning_thread = the_period->owner;
/*
* If using nanosecond statistics, we need to obtain the uptime.
*/
#ifndef __RTEMS_USE_TICKS_FOR_STATISTICS__
Timestamp_Control uptime;
_TOD_Get_uptime( &uptime );
#endif
/*
* Set the starting point and the CPU time used for the statistics.
*/
#ifndef __RTEMS_USE_TICKS_FOR_STATISTICS__
the_period->time_at_period = uptime;
#else
the_period->time_at_period = _Watchdog_Ticks_since_boot;
#endif
the_period->owner_executed_at_period = owning_thread->cpu_time_used;
/*
* If using nanosecond statistics and the period's thread is currently
* executing, then we need to take into account how much time the
* executing thread has run since the last context switch. When this
* routine is invoked from rtems_rate_monotonic_period, the owner will
* be the executing thread. When this routine is invoked from
* _Rate_monotonic_Timeout, it will not.
*/
#ifndef __RTEMS_USE_TICKS_FOR_STATISTICS__
if (owning_thread == _Thread_Executing) {
rtems_thread_cpu_usage_t ran;
/*
* Adjust the CPU time used to account for the time since last
* context switch.
*/
_Timespec_Subtract(
&_Thread_Time_of_last_context_switch, &uptime, &ran
);
_Timespec_Add_to( &the_period->owner_executed_at_period, &ran );
}
#endif
}
void _Rate_monotonic_Update_statistics(
Rate_monotonic_Control *the_period
)
{
Rate_monotonic_Statistics *stats;
Thread_CPU_usage_t executed;
Rate_monotonic_Period_time_t since_last_period;
/*
* If using nanosecond statistics, we need to obtain the uptime.
*/
#ifndef __RTEMS_USE_TICKS_FOR_STATISTICS__
Timestamp_Control uptime;
_TOD_Get_uptime( &uptime );
#endif
/*
* Assume we are only called in states where it is appropriate
* to update the statistics. This should only be RATE_MONOTONIC_ACTIVE
* and RATE_MONOTONIC_EXPIRED.
*/
/*
* Update the counts.
*/
stats = &the_period->Statistics;
stats->count++;
if ( the_period->state == RATE_MONOTONIC_EXPIRED )
stats->missed_count++;
/*
* Grab basic information for time statistics.
*/
#ifndef __RTEMS_USE_TICKS_FOR_STATISTICS__
_Timespec_Subtract(
&the_period->time_at_period,
&uptime,
&since_last_period
);
#else
since_last_period = _Watchdog_Ticks_since_boot - the_period->time_at_period;
#endif
#ifndef __RTEMS_USE_TICKS_FOR_STATISTICS__
{
Thread_CPU_usage_t ran, used;
/* Grab CPU usage when the thread got switched in */
used = _Thread_Executing->cpu_time_used;
/* partial period, cpu usage info reset while executing. Throw away */
if (_Timestamp_Less_than( &used, &the_period->owner_executed_at_period))
return;
/* How much time time since last context switch */
_Timestamp_Subtract(&_Thread_Time_of_last_context_switch, &uptime, &ran);
/* executed += ran */
_Timestamp_Add_to( &used, &ran );
/* executed = current cpu usage - value at start of period */
_Timestamp_Subtract(
&the_period->owner_executed_at_period,
&used,
&executed
);
}
#else
/* partial period, cpu usage info reset while executing. Throw away */
if (the_period->owner->cpu_time_used <
the_period->owner_executed_at_period)
return;
executed = the_period->owner->cpu_time_used -
the_period->owner_executed_at_period;
#endif
/*
* Update CPU time
*/
#ifndef __RTEMS_USE_TICKS_FOR_STATISTICS__
_Timestamp_Add_to( &stats->total_cpu_time, &executed );
if ( _Timestamp_Less_than( &executed, &stats->min_cpu_time ) )
stats->min_cpu_time = executed;
if ( _Timestamp_Greater_than( &executed, &stats->max_cpu_time ) )
stats->max_cpu_time = executed;
#else
stats->total_cpu_time += executed;
if ( executed < stats->min_cpu_time )
stats->min_cpu_time = executed;
if ( executed > stats->max_cpu_time )
stats->max_cpu_time = executed;
#endif
/*
* Update Wall time
*/
#ifndef __RTEMS_USE_TICKS_FOR_STATISTICS__
_Timestamp_Add_to( &stats->total_wall_time, &since_last_period );
if ( _Timestamp_Less_than( &since_last_period, &stats->min_wall_time ) )
stats->min_wall_time = since_last_period;
if ( _Timestamp_Greater_than( &since_last_period, &stats->max_wall_time ) )
stats->max_wall_time = since_last_period;
#else
/* Sanity check wall time */
if ( since_last_period < executed )
since_last_period = executed;
stats->total_wall_time += since_last_period;
if ( since_last_period < stats->min_wall_time )
stats->min_wall_time = since_last_period;
if ( since_last_period > stats->max_wall_time )
stats->max_wall_time = since_last_period;
#endif
}
/*PAGE
*
* rtems_rate_monotonic_period
*
* This directive allows a thread to manipulate a rate monotonic timer.
*
* Input parameters:
* id - rate monotonic id
* length - length of period (in ticks)
*
* Output parameters:
* RTEMS_SUCCESSFUL - if successful
* error code - if unsuccessful
*/
rtems_status_code rtems_rate_monotonic_period(
Objects_Id id,
rtems_interval length
)
{
Rate_monotonic_Control *the_period;
Objects_Locations location;
rtems_status_code return_value;
rtems_rate_monotonic_period_states local_state;
ISR_Level level;
the_period = _Rate_monotonic_Get( id, &location );
switch ( location ) {
case OBJECTS_LOCAL:
if ( !_Thread_Is_executing( the_period->owner ) ) {
_Thread_Enable_dispatch();
return RTEMS_NOT_OWNER_OF_RESOURCE;
}
if ( length == RTEMS_PERIOD_STATUS ) {
switch ( the_period->state ) {
case RATE_MONOTONIC_INACTIVE:
return_value = RTEMS_NOT_DEFINED;
break;
case RATE_MONOTONIC_EXPIRED:
case RATE_MONOTONIC_EXPIRED_WHILE_BLOCKING:
return_value = RTEMS_TIMEOUT;
break;
case RATE_MONOTONIC_ACTIVE:
default: /* unreached -- only to remove warnings */
return_value = RTEMS_SUCCESSFUL;
break;
}
_Thread_Enable_dispatch();
return( return_value );
}
_ISR_Disable( level );
switch ( the_period->state ) {
case RATE_MONOTONIC_INACTIVE: {
_ISR_Enable( level );
/*
* Baseline statistics information for the beginning of a period.
*/
_Rate_monotonic_Initiate_statistics( the_period );
the_period->state = RATE_MONOTONIC_ACTIVE;
_Watchdog_Initialize(
&the_period->Timer,
_Rate_monotonic_Timeout,
id,
NULL
);
the_period->next_length = length;
_Watchdog_Insert_ticks( &the_period->Timer, length );
_Thread_Enable_dispatch();
return RTEMS_SUCCESSFUL;
}
case RATE_MONOTONIC_ACTIVE:
/*
* Update statistics from the concluding period.
*/
_Rate_monotonic_Update_statistics( the_period );
/*
* This tells the _Rate_monotonic_Timeout that this task is
* in the process of blocking on the period and that we
* may be changing the length of the next period.
*/
the_period->state = RATE_MONOTONIC_OWNER_IS_BLOCKING;
the_period->next_length = length;
_ISR_Enable( level );
_Thread_Executing->Wait.id = the_period->Object.id;
_Thread_Set_state( _Thread_Executing, STATES_WAITING_FOR_PERIOD );
/*
* Did the watchdog timer expire while we were actually blocking
* on it?
*/
_ISR_Disable( level );
local_state = the_period->state;
the_period->state = RATE_MONOTONIC_ACTIVE;
_ISR_Enable( level );
/*
* If it did, then we want to unblock ourself and continue as
* if nothing happen. The period was reset in the timeout routine.
*/
if ( local_state == RATE_MONOTONIC_EXPIRED_WHILE_BLOCKING )
_Thread_Clear_state( _Thread_Executing, STATES_WAITING_FOR_PERIOD );
_Thread_Enable_dispatch();
return RTEMS_SUCCESSFUL;
break;
case RATE_MONOTONIC_EXPIRED:
/*
* Update statistics from the concluding period
*/
_Rate_monotonic_Initiate_statistics( the_period );
_ISR_Enable( level );
the_period->state = RATE_MONOTONIC_ACTIVE;
the_period->next_length = length;
_Watchdog_Insert_ticks( &the_period->Timer, length );
_Thread_Enable_dispatch();
return RTEMS_TIMEOUT;
case RATE_MONOTONIC_OWNER_IS_BLOCKING:
case RATE_MONOTONIC_EXPIRED_WHILE_BLOCKING:
/*
* These should never happen.
*/
break;
}
#if defined(RTEMS_MULTIPROCESSING)
case OBJECTS_REMOTE: /* should never return this */
#endif
case OBJECTS_ERROR:
break;
}
return RTEMS_INVALID_ID;
}
