/* SPDX-License-Identifier: BSD-2-Clause */
/**
* @file
*
* @ingroup RTEMSImplClassicClock
*
* @brief This header file defines the Clock Manager API.
*/
/*
* Copyright (C) 2014, 2021 embedded brains GmbH (http://www.embedded-brains.de)
* Copyright (C) 1988, 2008 On-Line Applications Research Corporation (OAR)
*
* Redistribution and use in source and binary forms, with or without
* modification, are permitted provided that the following conditions
* are met:
* 1. Redistributions of source code must retain the above copyright
* notice, this list of conditions and the following disclaimer.
* 2. Redistributions in binary form must reproduce the above copyright
* notice, this list of conditions and the following disclaimer in the
* documentation and/or other materials provided with the distribution.
*
* THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS"
* AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE
* IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE
* ARE DISCLAIMED. IN NO EVENT SHALL THE COPYRIGHT OWNER OR CONTRIBUTORS BE
* LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR
* CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF
* SUBSTITUTE GOODS OR SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS
* INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN
* CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE)
* ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE
* POSSIBILITY OF SUCH DAMAGE.
*/
/*
* This file is part of the RTEMS quality process and was automatically
* generated. If you find something that needs to be fixed or
* worded better please post a report or patch to an RTEMS mailing list
* or raise a bug report:
*
* https://www.rtems.org/bugs.html
*
* For information on updating and regenerating please refer to the How-To
* section in the Software Requirements Engineering chapter of the
* RTEMS Software Engineering manual. The manual is provided as a part of
* a release. For development sources please refer to the online
* documentation at:
*
* https://docs.rtems.org
*/
/* Generated from spec:/rtems/clock/if/header */
#ifndef _RTEMS_RTEMS_CLOCK_H
#define _RTEMS_RTEMS_CLOCK_H
#include <stdbool.h>
#include <stdint.h>
#include <time.h>
#include <rtems/config.h>
#include <sys/_timespec.h>
#include <sys/_timeval.h>
#include <rtems/rtems/status.h>
#include <rtems/rtems/types.h>
#include <rtems/score/watchdogticks.h>
#ifdef __cplusplus
extern "C" {
#endif
/* Generated from spec:/rtems/clock/if/group */
/**
* @defgroup RTEMSAPIClassicClock Clock Manager
*
* @ingroup RTEMSAPIClassic
*
* @brief The Clock Manager provides support for time of day and other time
* related capabilities.
*/
/* Generated from spec:/rtems/clock/if/bintime */
/* Forward declaration */
struct bintime;
/* Generated from spec:/rtems/clock/if/set */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Sets the CLOCK_REALTIME to the time of day.
*
* @param time_of_day is the time of day to set the clock.
*
* @retval ::RTEMS_SUCCESSFUL The requested operation was successful.
*
* @retval ::RTEMS_INVALID_ADDRESS The ``time_of_day`` parameter was NULL.
*
* @retval ::RTEMS_INVALID_CLOCK The time of day specified by ``time_of_day``
* was invalid.
*
* @par Notes
* @parblock
* The date, time, and ticks specified by ``time_of_day`` are all
* range-checked, and an error is returned if any one is out of its valid
* range.
*
* RTEMS can represent time points of the CLOCK_REALTIME clock in nanoseconds
* ranging from 1988-01-01T00:00:00.000000000Z to
* 2514-05-31T01:53:03.999999999Z. The future uptime of the system shall be in
* this range, otherwise the system behaviour is undefined. Due to
* implementation constraints, the time of day set by the directive shall be
* before 2100-01-01:00:00.000000000Z. The latest valid time of day accepted
* by the POSIX clock_settime() is 2400-01-01T00:00:00.999999999Z.
*
* The specified time is based on the configured clock tick rate, see the
* #CONFIGURE_MICROSECONDS_PER_TICK application configuration option.
*
* Setting the time forward will fire all CLOCK_REALTIME timers which are
* scheduled at a time point before or at the time set by the directive. This
* may unblock tasks, which may preempt the calling task. User-provided timer
* routines will execute in the context of the caller.
*
* It is allowed to call this directive from within interrupt context, however,
* this is not recommended since an arbitrary number of timers may fire.
*
* The directive shall be called at least once to enable the service of
* CLOCK_REALTIME related directives. If the clock is not set at least once,
* they may return an error status.
* @endparblock
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive may change the priority of a task. This may cause the
* calling task to be preempted.
*
* * The directive may unblock a task. This may cause the calling task to be
* preempted.
*
* * The time of day set by the directive shall be
* 1988-01-01T00:00:00.000000000Z or later.
*
* * The time of day set by the directive shall be before
* 2100-01-01T00:00:00.000000000Z.
* @endparblock
*/
rtems_status_code rtems_clock_set( const rtems_time_of_day *time_of_day );
/* Generated from spec:/rtems/clock/if/get-tod */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the time of day associated with the current CLOCK_REALTIME.
*
* @param time_of_day is the pointer to an rtems_time_of_day object. When the
* directive call is successful, the time of day associated with the
* CLOCK_REALTIME at some point during the directive call will be stored in
* this object.
*
* @retval ::RTEMS_SUCCESSFUL The requested operation was successful.
*
* @retval ::RTEMS_INVALID_ADDRESS The ``time_of_day`` parameter was NULL.
*
* @retval ::RTEMS_NOT_DEFINED The CLOCK_REALTIME was not set. It can be set
* with rtems_clock_set().
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
rtems_status_code rtems_clock_get_tod( rtems_time_of_day *time_of_day );
/* Generated from spec:/rtems/clock/if/get-tod-timeval */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the seconds and microseconds elapsed since the Unix epoch and
* the current CLOCK_REALTIME.
*
* @param[out] time_of_day is the pointer to a struct timeval object. When the
* directive call is successful, the seconds and microseconds elapsed since
* the Unix epoch and the CLOCK_REALTIME at some point during the directive
* call will be stored in this object.
*
* @retval ::RTEMS_SUCCESSFUL The requested operation was successful.
*
* @retval ::RTEMS_INVALID_ADDRESS The ``time_of_day`` parameter was NULL.
*
* @retval ::RTEMS_NOT_DEFINED The CLOCK_REALTIME was not set. It can be set
* with rtems_clock_set().
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
rtems_status_code rtems_clock_get_tod_timeval( struct timeval *time_of_day );
/* Generated from spec:/rtems/clock/if/get-realtime */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the time elapsed since the Unix epoch measured using
* CLOCK_REALTIME in seconds and nanoseconds format.
*
* @param[out] time_snapshot is the pointer to a struct timespec object. The
* time elapsed since the Unix epoch measured using the CLOCK_REALTIME at
* some time point during the directive call will be stored in this object.
* Calling the directive with a pointer equal to NULL is undefined behaviour.
*
* @par Notes
* @parblock
* The directive accesses a device provided by the Clock Driver to get the time
* in the highest precision available to the system. Alternatively, the
* rtems_clock_get_realtime_coarse() directive may be used to get the time with
* less precision and less runtime overhead.
*
* See rtems_clock_get_realtime_bintime() and
* rtems_clock_get_realtime_timeval() to get the time in alternative formats.
* @endparblock
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
void rtems_clock_get_realtime( struct timespec *time_snapshot );
/* Generated from spec:/rtems/clock/if/get-realtime-bintime */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the time elapsed since the Unix epoch measured using
* CLOCK_REALTIME in binary time format.
*
* @param[out] time_snapshot is the pointer to a bintime object. The time
* elapsed since the Unix epoch measured using the CLOCK_REALTIME at some
* time point during the directive call will be stored in this object.
* Calling the directive with a pointer equal to NULL is undefined behaviour.
*
* @par Notes
* @parblock
* The directive accesses a device provided by the Clock Driver to get the time
* in the highest precision available to the system. Alternatively, the
* rtems_clock_get_realtime_coarse_bintime() directive may be used to get the
* time with less precision and less runtime overhead.
*
* See rtems_clock_get_realtime() and rtems_clock_get_realtime_timeval() to get
* the time in alternative formats.
* @endparblock
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
void rtems_clock_get_realtime_bintime( struct bintime *time_snapshot );
/* Generated from spec:/rtems/clock/if/get-realtime-timeval */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the time elapsed since the Unix epoch measured using
* CLOCK_REALTIME in seconds and microseconds format.
*
* @param[out] time_snapshot is the pointer to a struct timeval object. The
* time elapsed since the Unix epoch measured using the CLOCK_REALTIME at
* some time point during the directive call will be stored in this object.
* Calling the directive with a pointer equal to NULL is undefined behaviour.
*
* @par Notes
* @parblock
* The directive accesses a device provided by the Clock Driver to get the time
* in the highest precision available to the system. Alternatively, the
* rtems_clock_get_realtime_coarse_timeval() directive may be used to get the
* time with less precision and less runtime overhead.
*
* See rtems_clock_get_realtime() and rtems_clock_get_realtime_bintime() to get
* the time in alternative formats.
* @endparblock
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
void rtems_clock_get_realtime_timeval( struct timeval *time_snapshot );
/* Generated from spec:/rtems/clock/if/get-realtime-coarse */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the time elapsed since the Unix epoch measured using
* CLOCK_REALTIME in coarse precision in seconds and nanoseconds format.
*
* @param[out] time_snapshot is the pointer to a struct timespec object. The
* time elapsed since the Unix epoch measured using the CLOCK_REALTIME at
* some time point close to the directive call will be stored in this object.
* Calling the directive with a pointer equal to NULL is undefined behaviour.
*
* @par Notes
* @parblock
* The directive does not access a device to get the time. It uses a recent
* snapshot provided by the Clock Driver. Alternatively, the
* rtems_clock_get_realtime() directive may be used to get the time with higher
* precision and higher runtime overhead.
*
* See rtems_clock_get_realtime_coarse_bintime() and
* rtems_clock_get_realtime_coarse_timeval() to get the time in alternative
* formats.
* @endparblock
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
void rtems_clock_get_realtime_coarse( struct timespec *time_snapshot );
/* Generated from spec:/rtems/clock/if/get-realtime-coarse-bintime */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the time elapsed since the Unix epoch measured using
* CLOCK_REALTIME in coarse precision in binary time format.
*
* @param[out] time_snapshot is the pointer to a bintime object. The time
* elapsed since the Unix epoch measured using the CLOCK_REALTIME at some
* time point close to the directive call will be stored in this object.
* Calling the directive with a pointer equal to NULL is undefined behaviour.
*
* @par Notes
* @parblock
* The directive does not access a device to get the time. It uses a recent
* snapshot provided by the Clock Driver. Alternatively, the
* rtems_clock_get_realtime_bintime() directive may be used to get the time
* with higher precision and higher runtime overhead.
*
* See rtems_clock_get_realtime_coarse() and
* rtems_clock_get_realtime_coarse_timeval() to get the time in alternative
* formats.
* @endparblock
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
void rtems_clock_get_realtime_coarse_bintime( struct bintime *time_snapshot );
/* Generated from spec:/rtems/clock/if/get-realtime-coarse-timeval */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the time elapsed since the Unix epoch measured using
* CLOCK_REALTIME in coarse precision in seconds and microseconds format.
*
* @param[out] time_snapshot is the pointer to a struct timeval object. The
* time elapsed since the Unix epoch measured using the CLOCK_REALTIME at
* some time point close to the directive call will be stored in this object.
* Calling the directive with a pointer equal to NULL is undefined behaviour.
*
* @par Notes
* @parblock
* The directive does not access a device to get the time. It uses a recent
* snapshot provided by the Clock Driver. Alternatively, the
* rtems_clock_get_realtime_timeval() directive may be used to get the time
* with higher precision and higher runtime overhead.
*
* See rtems_clock_get_realtime_coarse() and
* rtems_clock_get_realtime_coarse_timeval() to get the time in alternative
* formats.
* @endparblock
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
void rtems_clock_get_realtime_coarse_timeval( struct timeval *time_snapshot );
/* Generated from spec:/rtems/clock/if/get-monotonic */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the time elapsed since some fixed time point in the past
* measured using the CLOCK_MONOTONIC in seconds and nanoseconds format.
*
* @param[out] time_snapshot is the pointer to a bintime object. The time
* elapsed since some fixed time point in the past measured using the
* CLOCK_MONOTONIC at some time point during the directive call will be
* stored in this object. Calling the directive with a pointer equal to NULL
* is undefined behaviour.
*
* @par Notes
* @parblock
* The directive accesses a device provided by the Clock Driver to get the time
* in the highest precision available to the system. Alternatively, the
* rtems_clock_get_monotonic_coarse() directive may be used to get the time
* with less precision and less runtime overhead.
*
* See rtems_clock_get_monotonic_bintime(),
* rtems_clock_get_monotonic_sbintime(), and
* rtems_clock_get_monotonic_timeval() to get the time in alternative formats.
* @endparblock
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
void rtems_clock_get_monotonic( struct timespec *time_snapshot );
/* Generated from spec:/rtems/clock/if/get-monotonic-bintime */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the time elapsed since some fixed time point in the past
* measured using the CLOCK_MONOTONIC in binary time format.
*
* @param[out] time_snapshot is the pointer to a bintime object. The time
* elapsed since some fixed time point in the past measured using the
* CLOCK_MONOTONIC at some time point during the directive call will be
* stored in this object. Calling the directive with a pointer equal to NULL
* is undefined behaviour.
*
* @par Notes
* @parblock
* The directive accesses a device provided by the Clock Driver to get the time
* in the highest precision available to the system. Alternatively, the
* rtems_clock_get_monotonic_coarse_bintime() directive may be used to get the
* time with less precision and less runtime overhead.
*
* See rtems_clock_get_monotonic(), rtems_clock_get_monotonic_sbintime(), and
* rtems_clock_get_monotonic_timeval() to get the time in alternative formats.
* @endparblock
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
void rtems_clock_get_monotonic_bintime( struct bintime *time_snapshot );
/* Generated from spec:/rtems/clock/if/get-monotonic-sbintime */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the time elapsed since some fixed time point in the past
* measured using the CLOCK_MONOTONIC in signed binary time format.
*
* @return Returns the time elapsed since some fixed time point in the past
* measured using the CLOCK_MONOTONIC at some time point during the directive
* call.
*
* @par Notes
* @parblock
* The directive accesses a device provided by the Clock Driver to get the time
* in the highest precision available to the system.
*
* See rtems_clock_get_monotonic(), rtems_clock_get_monotonic_bintime(), and
* rtems_clock_get_monotonic_timeval() to get the time in alternative formats.
* @endparblock
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
int64_t rtems_clock_get_monotonic_sbintime( void );
/* Generated from spec:/rtems/clock/if/get-monotonic-timeval */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the time elapsed since some fixed time point in the past
* measured using the CLOCK_MONOTONIC in seconds and microseconds format.
*
* @param[out] time_snapshot is the pointer to a bintime object. The time
* elapsed since some fixed time point in the past measured using the
* CLOCK_MONOTONIC at some time point during the directive call will be
* stored in this object. Calling the directive with a pointer equal to NULL
* is undefined behaviour.
*
* @par Notes
* @parblock
* The directive accesses a device provided by the Clock Driver to get the time
* in the highest precision available to the system. Alternatively, the
* rtems_clock_get_monotonic_coarse_timeval() directive may be used to get the
* time with less precision and less runtime overhead.
*
* See rtems_clock_get_monotonic(), rtems_clock_get_monotonic_bintime(), and
* rtems_clock_get_monotonic_sbintime() to get the time in alternative formats.
* @endparblock
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
void rtems_clock_get_monotonic_timeval( struct timeval *time_snapshot );
/* Generated from spec:/rtems/clock/if/get-monotonic-coarse */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the time elapsed since some fixed time point in the past
* measured using the CLOCK_MONOTONIC in coarse precision in seconds and
* nanoseconds format.
*
* @param[out] time_snapshot is the pointer to a bintime object. The time
* elapsed since some fixed time point in the past measured using the
* CLOCK_MONOTONIC at some time point close to the directive call will be
* stored in this object. Calling the directive with a pointer equal to NULL
* is undefined behaviour.
*
* @par Notes
* @parblock
* The directive does not access a device to get the time. It uses a recent
* snapshot provided by the Clock Driver. Alternatively, the
* rtems_clock_get_monotonic() directive may be used to get the time with
* higher precision and higher runtime overhead.
*
* See rtems_clock_get_monotonic_coarse_bintime() and
* rtems_clock_get_monotonic_coarse_timeval() to get the time in alternative
* formats.
* @endparblock
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
void rtems_clock_get_monotonic_coarse( struct timespec *time_snapshot );
/* Generated from spec:/rtems/clock/if/get-monotonic-coarse-bintime */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the time elapsed since some fixed time point in the past
* measured using the CLOCK_MONOTONIC in coarse precision in binary time
* format.
*
* @param[out] time_snapshot is the pointer to a bintime object. The time
* elapsed since some fixed time point in the past measured using the
* CLOCK_MONOTONIC at some time point close to the directive call will be
* stored in this object. Calling the directive with a pointer equal to NULL
* is undefined behaviour.
*
* @par Notes
* @parblock
* The directive does not access a device to get the time. It uses a recent
* snapshot provided by the Clock Driver. Alternatively, the
* rtems_clock_get_monotonic_bintime() directive may be used to get the time
* with higher precision and higher runtime overhead.
*
* See rtems_clock_get_monotonic_coarse() and
* rtems_clock_get_monotonic_coarse_timeval() to get the time in alternative
* formats.
* @endparblock
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
void rtems_clock_get_monotonic_coarse_bintime( struct bintime *time_snapshot );
/* Generated from spec:/rtems/clock/if/get-monotonic-coarse-timeval */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the time elapsed since some fixed time point in the past
* measured using the CLOCK_MONOTONIC in coarse precision in seconds and
* microseconds format.
*
* @param[out] time_snapshot is the pointer to a bintime object. The time
* elapsed since some fixed time point in the past measured using the
* CLOCK_MONOTONIC at some time point close to the directive call will be
* stored in this object. Calling the directive with a pointer equal to NULL
* is undefined behaviour.
*
* @par Notes
* @parblock
* The directive does not access a device to get the time. It uses a recent
* snapshot provided by the Clock Driver. Alternatively, the
* rtems_clock_get_monotonic_timeval() directive may be used to get the time
* with higher precision and higher runtime overhead.
*
* See rtems_clock_get_monotonic_coarse() and
* rtems_clock_get_monotonic_coarse_bintime() to get the time in alternative
* formats.
* @endparblock
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
void rtems_clock_get_monotonic_coarse_timeval( struct timeval *time_snapshot );
/* Generated from spec:/rtems/clock/if/get-boot-time */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the time elapsed since the Unix epoch at some time point during
* system initialization in seconds and nanoseconds format.
*
* @param[out] boot_time is the pointer to a struct timespec object. The time
* elapsed since the Unix epoch at some time point during system
* initialization call will be stored in this object. Calling the directive
* with a pointer equal to NULL is undefined behaviour.
*
* @par Notes
* See rtems_clock_get_boot_time_bintime() and
* rtems_clock_get_boot_time_timeval() to get the boot time in alternative
* formats. Setting the CLOCK_REALTIME will also set the boot time.
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
void rtems_clock_get_boot_time( struct timespec *boot_time );
/* Generated from spec:/rtems/clock/if/get-boot-time-bintime */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the time elapsed since the Unix epoch at some time point during
* system initialization in binary time format.
*
* @param[out] boot_time is the pointer to a bintime object. The time elapsed
* since the Unix epoch at some time point during system initialization call
* will be stored in this object. Calling the directive with a pointer equal
* to NULL is undefined behaviour.
*
* @par Notes
* See rtems_clock_get_boot_time() and rtems_clock_get_boot_time_timeval() to
* get the boot time in alternative formats. Setting the CLOCK_REALTIME will
* also set the boot time.
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
void rtems_clock_get_boot_time_bintime( struct bintime *boot_time );
/* Generated from spec:/rtems/clock/if/get-boot-time-timeval */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the time elapsed since the Unix epoch at some time point during
* system initialization in seconds and microseconds format.
*
* @param[out] boot_time is the pointer to a struct timeval object. The time
* elapsed since the Unix epoch at some time point during system
* initialization call will be stored in this object. Calling the directive
* with a pointer equal to NULL is undefined behaviour.
*
* @par Notes
* See rtems_clock_get_boot_time() and rtems_clock_get_boot_time_bintime() to
* get the boot time in alternative formats. Setting the CLOCK_REALTIME will
* also set the boot time.
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
void rtems_clock_get_boot_time_timeval( struct timeval *boot_time );
/* Generated from spec:/rtems/clock/if/get-seconds-since-epoch */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the seconds elapsed since the RTEMS epoch and the current
* CLOCK_REALTIME.
*
* @param[out] seconds_since_rtems_epoch is the pointer to an ::rtems_interval
* object. When the directive call is successful, the seconds elapsed since
* the RTEMS epoch and the CLOCK_REALTIME at some point during the directive
* call will be stored in this object.
*
* @retval ::RTEMS_SUCCESSFUL The requested operation was successful.
*
* @retval ::RTEMS_INVALID_ADDRESS The ``seconds_since_rtems_epoch`` parameter
* was NULL.
*
* @retval ::RTEMS_NOT_DEFINED The CLOCK_REALTIME was not set. It can be set
* with rtems_clock_set().
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
rtems_status_code rtems_clock_get_seconds_since_epoch(
rtems_interval *seconds_since_rtems_epoch
);
/* Generated from spec:/rtems/clock/if/get-ticks-per-second */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the number of clock ticks per second configured for the
* application.
*
* @return Returns the number of clock ticks per second configured for this
* application.
*
* @par Notes
* The number of clock ticks per second is defined indirectly by the
* #CONFIGURE_MICROSECONDS_PER_TICK configuration option.
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
* @endparblock
*/
rtems_interval rtems_clock_get_ticks_per_second( void );
/* Generated from spec:/rtems/clock/if/get-ticks-per-second-macro */
#define rtems_clock_get_ticks_per_second() _Watchdog_Ticks_per_second
/* Generated from spec:/rtems/clock/if/get-ticks-since-boot */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the number of clock ticks since some time point during the
* system initialization or the last overflow of the clock tick counter.
*
* @return Returns the number of clock ticks since some time point during the
* system initialization or the last overflow of the clock tick counter.
*
* @par Notes
* With a 1ms clock tick, this counter overflows after 50 days since boot.
* This is the historical measure of uptime in an RTEMS system. The newer
* service rtems_clock_get_uptime() is another and potentially more accurate
* way of obtaining similar information.
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
* @endparblock
*/
rtems_interval rtems_clock_get_ticks_since_boot( void );
/* Generated from spec:/rtems/clock/if/get-ticks-since-boot-macro */
#define rtems_clock_get_ticks_since_boot() _Watchdog_Ticks_since_boot
/* Generated from spec:/rtems/clock/if/get-uptime */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the seconds and nanoseconds elapsed since some time point during
* the system initialization using CLOCK_MONOTONIC.
*
* @param[out] uptime is the pointer to a struct timeval object. When the
* directive call is successful, the seconds and nanoseconds elapsed since
* some time point during the system initialization and some point during the
* directive call using CLOCK_MONOTONIC will be stored in this object.
*
* @retval ::RTEMS_SUCCESSFUL The requested operation was successful.
*
* @retval ::RTEMS_INVALID_ADDRESS The ``uptime`` parameter was NULL.
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
rtems_status_code rtems_clock_get_uptime( struct timespec *uptime );
/* Generated from spec:/rtems/clock/if/get-uptime-timeval */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the seconds and microseconds elapsed since some time point
* during the system initialization using CLOCK_MONOTONIC.
*
* @param[out] uptime is the pointer to a struct timeval object. The seconds
* and microseconds elapsed since some time point during the system
* initialization and some point during the directive call using
* CLOCK_MONOTONIC will be stored in this object. The pointer shall be
* valid, otherwise the behaviour is undefined.
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
void rtems_clock_get_uptime_timeval( struct timeval *uptime );
/* Generated from spec:/rtems/clock/if/get-uptime-seconds */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the seconds elapsed since some time point during the system
* initialization using CLOCK_MONOTONIC.
*
* @return Returns the seconds elapsed since some time point during the system
* initialization and some point during the directive call using
* CLOCK_MONOTONIC.
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
time_t rtems_clock_get_uptime_seconds( void );
/* Generated from spec:/rtems/clock/if/get-uptime-nanoseconds */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets the nanoseconds elapsed since some time point during the system
* initialization using CLOCK_MONOTONIC.
*
* @return Returns the nanoseconds elapsed since some time point during the
* system initialization and some point during the directive call using
* CLOCK_MONOTONIC.
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
uint64_t rtems_clock_get_uptime_nanoseconds( void );
/* Generated from spec:/rtems/clock/if/tick-later */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets a clock tick value which is at least delta clock ticks in the
* future.
*
* @param delta is the delta value in clock ticks.
*
* @return Returns a clock tick counter value which is at least ``delta`` clock
* ticks in the future.
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
static inline rtems_interval rtems_clock_tick_later( rtems_interval delta )
{
return _Watchdog_Ticks_since_boot + delta;
}
/* Generated from spec:/rtems/clock/if/tick-later-usec */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Gets a clock tick value which is at least delta microseconds in the
* future.
*
* @param delta_in_usec is the delta value in microseconds.
*
* @return Returns a clock tick counter value which is at least
* ``delta_in_usec`` microseconds in the future.
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
static inline rtems_interval rtems_clock_tick_later_usec(
rtems_interval delta_in_usec
)
{
rtems_interval us_per_tick;
us_per_tick = rtems_configuration_get_microseconds_per_tick();
/*
* Add one additional tick, since we do not know the time to the clock
* next tick.
*/
return _Watchdog_Ticks_since_boot + 1
+ ( delta_in_usec + us_per_tick - 1 ) / us_per_tick;
}
/* Generated from spec:/rtems/clock/if/tick-before */
/**
* @ingroup RTEMSAPIClassicClock
*
* @brief Indicates if the current clock tick counter is before the ticks.
*
* @param ticks is the ticks value to check.
*
* @return Returns true, if current clock tick counter indicates a time before
* the time in ticks, otherwise returns false.
*
* @par Notes
* @parblock
* This directive can be used to write busy loops with a timeout.
*
* @code
* status busy( void )
* {
* rtems_interval timeout;
*
* timeout = rtems_clock_tick_later_usec( 10000 );
*
* do {
* if ( ok() ) {
* return success;
* }
* } while ( rtems_clock_tick_before( timeout ) );
*
* return timeout;
* }
* @endcode
* @endparblock
*
* @par Constraints
* @parblock
* The following constraints apply to this directive:
*
* * The directive may be called from within any runtime context.
*
* * The directive will not cause the calling task to be preempted.
*
* * The directive requires a Clock Driver.
* @endparblock
*/
static inline bool rtems_clock_tick_before( rtems_interval ticks )
{
return (int32_t) ( ticks - _Watchdog_Ticks_since_boot ) > 0;
}
/* Generated from spec:/rtems/clock/if/tick */
/**
* @brief Announces a clock tick.
*
* @par Notes
* The directive is a legacy interface. It should not be called by
* applications directly. A Clock Driver may call this directive.
*/
rtems_status_code rtems_clock_tick( void );
#ifdef __cplusplus
}
#endif
#endif /* _RTEMS_RTEMS_CLOCK_H */
