blob: b113545cce26b94bb070622c320dc78045059510 (
plain) (
tree)
|
|
/**
* @file
*
* @brief RTEMS Port of Linux I2C API
*
* @ingroup I2CLinux
*/
/*
* Copyright (c) 2014 embedded brains GmbH. All rights reserved.
*
* embedded brains GmbH
* Dornierstr. 4
* 82178 Puchheim
* Germany
* <rtems@embedded-brains.de>
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.org/license/LICENSE.
*/
#ifndef _UAPI_LINUX_I2C_H
#define _UAPI_LINUX_I2C_H
#include <stdint.h>
/**
* @defgroup I2CLinux Linux I2C User-Space API
*
* @ingroup I2C
*
* @brief RTEMS port of Linux I2C user-space API.
*
* Additional documentation is available through the Linux sources, see:
*
* - /usr/src/linux/include/uapi/linux/i2c.h,
* - /usr/src/linux/include/uapi/linux/i2c-dev.h
* - https://www.kernel.org/doc/Documentation/i2c/i2c-protocol
* - https://www.kernel.org/doc/Documentation/i2c/dev-interface
*
* @{
*/
/**
* @name I2C Message Flags
*
* @{
*/
/**
* @brief I2C message flag to indicate a 10-bit address.
*
* The controller must support this as indicated by the I2C_FUNC_10BIT_ADDR
* functionality.
*
* @see i2c_msg.
*/
#define I2C_M_TEN 0x0010
/**
* @brief I2C message flag to indicate a read transfer (from slave to master).
*
* @see i2c_msg.
*/
#define I2C_M_RD 0x0001
/**
* @brief I2C message flag to signal a stop condition even if this is not the
* last message.
*
* The controller must support this as indicated by the
* @ref I2C_FUNC_PROTOCOL_MANGLING functionality.
*
* @see i2c_msg.
*/
#define I2C_M_STOP 0x8000
/**
* @brief I2C message flag to omit start condition and slave address.
*
* The controller must support this as indicated by the
* @ref I2C_FUNC_NOSTART functionality.
*
* @see i2c_msg.
*/
#define I2C_M_NOSTART 0x4000
/**
* @brief I2C message flag to reverse the direction flag.
*
* The controller must support this as indicated by the
* @ref I2C_FUNC_PROTOCOL_MANGLING functionality.
*
* @see i2c_msg.
*/
#define I2C_M_REV_DIR_ADDR 0x2000
/**
* @brief I2C message flag to ignore a non-acknowledge.
*
* The controller must support this as indicated by the
* @ref I2C_FUNC_PROTOCOL_MANGLING functionality.
*
* @see i2c_msg.
*/
#define I2C_M_IGNORE_NAK 0x1000
/**
* @brief I2C message flag to omit a master acknowledge/non-acknowledge in a
* read transfer.
*
* The controller must support this as indicated by the
* @ref I2C_FUNC_PROTOCOL_MANGLING functionality.
*
* @see i2c_msg.
*/
#define I2C_M_NO_RD_ACK 0x0800
/**
* @brief I2C message flag to indicate that the message data length is the
* first received byte.
*
* The message data buffer must be large enough to store up to 32 bytes, the
* initial length byte and the SMBus PEC (if used). Initialize the message
* length to one. The message length is incremented by the count of received
* data bytes.
*
* @see i2c_msg.
*/
#define I2C_M_RECV_LEN 0x0400
/** @} */
/**
* @brief I2C transfer message.
*/
struct i2c_msg {
/**
* @brief The slave address.
*
* In case the @ref I2C_M_TEN flag is set, then this is a 10-bit address,
* otherwise it is a 7-bit address.
*/
uint16_t addr;
/**
* @brief The message flags.
*
* Valid flags are
* - @ref I2C_M_TEN,
* - @ref I2C_M_RD,
* - @ref I2C_M_STOP,
* - @ref I2C_M_NOSTART,
* - @ref I2C_M_REV_DIR_ADDR,
* - @ref I2C_M_IGNORE_NAK,
* - @ref I2C_M_NO_RD_ACK, and
* - @ref I2C_M_RECV_LEN.
*/
uint16_t flags;
/**
* @brief The message data length in bytes.
*/
uint16_t len;
/**
* @brief Pointer to the message data.
*/
uint8_t *buf;
};
/**
* @name I2C Controller Functionality
*
* @{
*/
#define I2C_FUNC_I2C 0x00000001
#define I2C_FUNC_10BIT_ADDR 0x00000002
#define I2C_FUNC_PROTOCOL_MANGLING 0x00000004
#define I2C_FUNC_SMBUS_PEC 0x00000008
#define I2C_FUNC_NOSTART 0x00000010
#define I2C_FUNC_SMBUS_BLOCK_PROC_CALL 0x00008000
#define I2C_FUNC_SMBUS_QUICK 0x00010000
#define I2C_FUNC_SMBUS_READ_BYTE 0x00020000
#define I2C_FUNC_SMBUS_WRITE_BYTE 0x00040000
#define I2C_FUNC_SMBUS_READ_BYTE_DATA 0x00080000
#define I2C_FUNC_SMBUS_WRITE_BYTE_DATA 0x00100000
#define I2C_FUNC_SMBUS_READ_WORD_DATA 0x00200000
#define I2C_FUNC_SMBUS_WRITE_WORD_DATA 0x00400000
#define I2C_FUNC_SMBUS_PROC_CALL 0x00800000
#define I2C_FUNC_SMBUS_READ_BLOCK_DATA 0x01000000
#define I2C_FUNC_SMBUS_WRITE_BLOCK_DATA 0x02000000
#define I2C_FUNC_SMBUS_READ_I2C_BLOCK 0x04000000
#define I2C_FUNC_SMBUS_WRITE_I2C_BLOCK 0x08000000
#define I2C_FUNC_SMBUS_BYTE \
(I2C_FUNC_SMBUS_READ_BYTE | I2C_FUNC_SMBUS_WRITE_BYTE)
#define I2C_FUNC_SMBUS_BYTE_DATA \
(I2C_FUNC_SMBUS_READ_BYTE_DATA | I2C_FUNC_SMBUS_WRITE_BYTE_DATA)
#define I2C_FUNC_SMBUS_WORD_DATA \
(I2C_FUNC_SMBUS_READ_WORD_DATA | I2C_FUNC_SMBUS_WRITE_WORD_DATA)
#define I2C_FUNC_SMBUS_BLOCK_DATA \
(I2C_FUNC_SMBUS_READ_BLOCK_DATA | I2C_FUNC_SMBUS_WRITE_BLOCK_DATA)
#define I2C_FUNC_SMBUS_I2C_BLOCK \
(I2C_FUNC_SMBUS_READ_I2C_BLOCK | I2C_FUNC_SMBUS_WRITE_I2C_BLOCK)
#define I2C_FUNC_SMBUS_EMUL \
(I2C_FUNC_SMBUS_QUICK | I2C_FUNC_SMBUS_BYTE | I2C_FUNC_SMBUS_BYTE_DATA \
| I2C_FUNC_SMBUS_WORD_DATA | I2C_FUNC_SMBUS_PROC_CALL \
| I2C_FUNC_SMBUS_WRITE_BLOCK_DATA | I2C_FUNC_SMBUS_I2C_BLOCK \
| I2C_FUNC_SMBUS_PEC)
/** @} */
/**
* @brief Maximum SMBus data block count.
*/
#define I2C_SMBUS_BLOCK_MAX 32
/**
* @brief SMBus data.
*/
union i2c_smbus_data {
uint8_t byte;
uint16_t word;
uint8_t block[I2C_SMBUS_BLOCK_MAX + 2];
};
/**
* @name SMBus Transfer Read and Write Markers
*
* @{
*/
#define I2C_SMBUS_READ 1
#define I2C_SMBUS_WRITE 0
/** @} */
/**
* @name SMBus Transaction Types
*
* @{
*/
#define I2C_SMBUS_QUICK 0
#define I2C_SMBUS_BYTE 1
#define I2C_SMBUS_BYTE_DATA 2
#define I2C_SMBUS_WORD_DATA 3
#define I2C_SMBUS_PROC_CALL 4
#define I2C_SMBUS_BLOCK_DATA 5
#define I2C_SMBUS_I2C_BLOCK_BROKEN 6
#define I2C_SMBUS_BLOCK_PROC_CALL 7
#define I2C_SMBUS_I2C_BLOCK_DATA 8
/** @} */
/** @} */
#endif /* _UAPI_LINUX_I2C_H */
|