diff -Naur -x autom4te.cache gdb-6.8.orig/sim/common/aclocal.m4 gdb-6.8-rtems4.9-20080428/sim/common/aclocal.m4
--- gdb-6.8.orig/sim/common/aclocal.m4 2006-06-13 10:06:48.000000000 +0200
+++ gdb-6.8-rtems4.9-20080428/sim/common/aclocal.m4 2008-04-28 07:18:30.000000000 +0200
@@ -18,7 +18,7 @@
#
# SIM_AC_OUTPUT
-AC_DEFUN(SIM_AC_COMMON,
+AC_DEFUN([SIM_AC_COMMON],
[
# autoconf.info says this should be called right after AC_INIT.
AC_CONFIG_HEADER(ifelse([$1],,config.h,[$1]):config.in)
@@ -245,7 +245,7 @@
dnl supported.
dnl ??? Until there is demonstrable value in doing something more complicated,
dnl let's not.
-AC_DEFUN(SIM_AC_OPTION_ENVIRONMENT,
+AC_DEFUN([SIM_AC_OPTION_ENVIRONMENT],
[
AC_ARG_ENABLE(sim-environment,
[ --enable-sim-environment=environment Specify mixed, user, virtual or operating environment.],
@@ -269,7 +269,7 @@
dnl Without this option all possible alignment restrictions are accommodated.
dnl arg[1] is hardwired target alignment
dnl arg[2] is default target alignment
-AC_DEFUN(SIM_AC_OPTION_ALIGNMENT,
+AC_DEFUN([SIM_AC_OPTION_ALIGNMENT],
wire_alignment="[$1]"
default_alignment="[$2]"
[
@@ -318,7 +318,7 @@
dnl Conditionally compile in assertion statements.
-AC_DEFUN(SIM_AC_OPTION_ASSERT,
+AC_DEFUN([SIM_AC_OPTION_ASSERT],
[
AC_ARG_ENABLE(sim-assert,
[ --enable-sim-assert Specify whether to perform random assertions.],
@@ -342,7 +342,7 @@
dnl arg[3] is the number of bits in an address
dnl arg[4] is the number of bits in an OpenFirmware cell.
dnl FIXME: this information should be obtained from bfd/archure
-AC_DEFUN(SIM_AC_OPTION_BITSIZE,
+AC_DEFUN([SIM_AC_OPTION_BITSIZE],
wire_word_bitsize="[$1]"
wire_word_msb="[$2]"
wire_address_bitsize="[$3]"
@@ -408,7 +408,7 @@
dnl that support both big and little endian targets.
dnl arg[1] is hardwired target endianness.
dnl arg[2] is default target endianness.
-AC_DEFUN(SIM_AC_OPTION_ENDIAN,
+AC_DEFUN([SIM_AC_OPTION_ENDIAN],
[
wire_endian="[$1]"
default_endian="[$2]"
@@ -458,7 +458,7 @@
dnl --enable-sim-hostendian is for users of the simulator when
dnl they find that AC_C_BIGENDIAN does not function correctly
dnl (for instance in a canadian cross)
-AC_DEFUN(SIM_AC_OPTION_HOSTENDIAN,
+AC_DEFUN([SIM_AC_OPTION_HOSTENDIAN],
[
AC_ARG_ENABLE(sim-hostendian,
[ --enable-sim-hostendian=end Specify host byte endian orientation.],
@@ -490,7 +490,7 @@
dnl And optionally the bitsize of the floating point register.
dnl arg[1] specifies the presence (or absence) of floating point hardware
dnl arg[2] specifies the number of bits in a floating point register
-AC_DEFUN(SIM_AC_OPTION_FLOAT,
+AC_DEFUN([SIM_AC_OPTION_FLOAT],
[
default_sim_float="[$1]"
default_sim_float_bitsize="[$2]"
@@ -519,7 +519,7 @@
dnl The argument is the default cache size if none is specified.
-AC_DEFUN(SIM_AC_OPTION_SCACHE,
+AC_DEFUN([SIM_AC_OPTION_SCACHE],
[
default_sim_scache="ifelse([$1],,0,[$1])"
AC_ARG_ENABLE(sim-scache,
@@ -539,7 +539,7 @@
dnl The argument is the default model if none is specified.
-AC_DEFUN(SIM_AC_OPTION_DEFAULT_MODEL,
+AC_DEFUN([SIM_AC_OPTION_DEFAULT_MODEL],
[
default_sim_default_model="ifelse([$1],,0,[$1])"
AC_ARG_ENABLE(sim-default-model,
@@ -559,7 +559,7 @@
dnl arg[1] Enable sim-hw by default? ("yes" or "no")
dnl arg[2] is a space separated list of devices that override the defaults
dnl arg[3] is a space separated list of extra target specific devices.
-AC_DEFUN(SIM_AC_OPTION_HARDWARE,
+AC_DEFUN([SIM_AC_OPTION_HARDWARE],
[
if test x"[$1]" = x"yes"; then
sim_hw_p=yes
@@ -621,7 +621,7 @@
dnl performance by inlining functions.
dnl Guarantee that unconfigured simulators do not do any inlining
sim_inline="-DDEFAULT_INLINE=0"
-AC_DEFUN(SIM_AC_OPTION_INLINE,
+AC_DEFUN([SIM_AC_OPTION_INLINE],
[
default_sim_inline="ifelse([$1],,,-DDEFAULT_INLINE=[$1])"
AC_ARG_ENABLE(sim-inline,
@@ -666,7 +666,7 @@
AC_SUBST(sim_inline)
-AC_DEFUN(SIM_AC_OPTION_PACKAGES,
+AC_DEFUN([SIM_AC_OPTION_PACKAGES],
[
AC_ARG_ENABLE(sim-packages,
[ --enable-sim-packages=list Specify the packages to be included in the build.],
@@ -692,7 +692,7 @@
AC_SUBST(sim_packages)
-AC_DEFUN(SIM_AC_OPTION_REGPARM,
+AC_DEFUN([SIM_AC_OPTION_REGPARM],
[
AC_ARG_ENABLE(sim-regparm,
[ --enable-sim-regparm=nr-parm Pass parameters in registers instead of on the stack - x86/GCC specific.],
@@ -709,7 +709,7 @@
AC_SUBST(sim_regparm)
-AC_DEFUN(SIM_AC_OPTION_RESERVED_BITS,
+AC_DEFUN([SIM_AC_OPTION_RESERVED_BITS],
[
default_sim_reserved_bits="ifelse([$1],,1,[$1])"
AC_ARG_ENABLE(sim-reserved-bits,
@@ -726,7 +726,7 @@
AC_SUBST(sim_reserved_bits)
-AC_DEFUN(SIM_AC_OPTION_SMP,
+AC_DEFUN([SIM_AC_OPTION_SMP],
[
default_sim_smp="ifelse([$1],,5,[$1])"
AC_ARG_ENABLE(sim-smp,
@@ -746,7 +746,7 @@
AC_SUBST(sim_smp)
-AC_DEFUN(SIM_AC_OPTION_STDCALL,
+AC_DEFUN([SIM_AC_OPTION_STDCALL],
[
AC_ARG_ENABLE(sim-stdcall,
[ --enable-sim-stdcall=type Use an alternative function call/return mechanism - x86/GCC specific.],
@@ -763,7 +763,7 @@
AC_SUBST(sim_stdcall)
-AC_DEFUN(SIM_AC_OPTION_XOR_ENDIAN,
+AC_DEFUN([SIM_AC_OPTION_XOR_ENDIAN],
[
default_sim_xor_endian="ifelse([$1],,8,[$1])"
AC_ARG_ENABLE(sim-xor-endian,
@@ -782,7 +782,7 @@
dnl --enable-build-warnings is for developers of the simulator.
dnl it enables extra GCC specific warnings.
-AC_DEFUN(SIM_AC_OPTION_WARNINGS,
+AC_DEFUN([SIM_AC_OPTION_WARNINGS],
[
# NOTE: Don't add -Wall or -Wunused, they both include
# -Wunused-parameter which reports bogus warnings.
@@ -866,7 +866,7 @@
dnl one afterwards. The two pieces of the common fragment are inserted into
dnl the target's fragment at the appropriate points.
-AC_DEFUN(SIM_AC_OUTPUT,
+AC_DEFUN([SIM_AC_OUTPUT],
[
AC_LINK_FILES($sim_link_files, $sim_link_links)
dnl Make @cgen_breaks@ non-null only if the sim uses CGEN.
@@ -895,7 +895,7 @@
sinclude(../../config/gettext-sister.m4)
dnl --enable-cgen-maint support
-AC_DEFUN(SIM_AC_OPTION_CGEN_MAINT,
+AC_DEFUN([SIM_AC_OPTION_CGEN_MAINT],
[
cgen_maint=no
dnl Default is to use one in build tree.
diff -Naur -x autom4te.cache gdb-6.8.orig/sim/erc32/configure gdb-6.8-rtems4.9-20080428/sim/erc32/configure
--- gdb-6.8.orig/sim/erc32/configure 2006-12-20 23:35:51.000000000 +0100
+++ gdb-6.8-rtems4.9-20080428/sim/erc32/configure 2008-04-28 13:55:32.000000000 +0200
@@ -309,7 +309,7 @@
# include <unistd.h>
#endif"
-ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS sim_environment sim_alignment sim_assert sim_bitsize sim_endian sim_hostendian sim_float sim_scache sim_default_model sim_hw_cflags sim_hw_objs sim_hw sim_inline sim_packages sim_regparm sim_reserved_bits sim_smp sim_stdcall sim_xor_endian WARN_CFLAGS WERROR_CFLAGS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CC_FOR_BUILD HDEFINES AR RANLIB ac_ct_RANLIB USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT CPP EGREP MAINT sim_bswap sim_cflags sim_debug sim_stdio sim_trace sim_profile TERMCAP READLINE cgen_breaks LIBOBJS LTLIBOBJS'
+ac_subst_vars='SHELL PATH_SEPARATOR PACKAGE_NAME PACKAGE_TARNAME PACKAGE_VERSION PACKAGE_STRING PACKAGE_BUGREPORT exec_prefix prefix program_transform_name bindir sbindir libexecdir datadir sysconfdir sharedstatedir localstatedir libdir includedir oldincludedir infodir mandir build_alias host_alias target_alias DEFS ECHO_C ECHO_N ECHO_T LIBS sim_environment sim_alignment sim_assert sim_bitsize sim_endian sim_hostendian sim_float sim_scache sim_default_model sim_hw_cflags sim_hw_objs sim_hw sim_inline sim_packages sim_regparm sim_reserved_bits sim_smp sim_stdcall sim_xor_endian WARN_CFLAGS WERROR_CFLAGS build build_cpu build_vendor build_os host host_cpu host_vendor host_os target target_cpu target_vendor target_os CC CFLAGS LDFLAGS CPPFLAGS ac_ct_CC EXEEXT OBJEXT INSTALL_PROGRAM INSTALL_SCRIPT INSTALL_DATA CC_FOR_BUILD HDEFINES AR RANLIB ac_ct_RANLIB USE_NLS LIBINTL LIBINTL_DEP INCINTL XGETTEXT GMSGFMT POSUB CATALOGS DATADIRNAME INSTOBJEXT GENCAT CATOBJEXT CPP EGREP MAINT sim_bswap sim_cflags sim_debug sim_stdio sim_trace sim_profile READLINE READLINE_DEPS READLINE_CFLAGS cgen_breaks LIBOBJS LTLIBOBJS'
ac_subst_files=''
# Initialize some variables set by options.
@@ -858,6 +858,11 @@
--enable-sim-trace=opts Enable tracing flags
--enable-sim-profile=opts Enable profiling flags
+Optional Packages:
+ --with-PACKAGE[=ARG] use PACKAGE [ARG=yes]
+ --without-PACKAGE do not use PACKAGE (same as --with-PACKAGE=no)
+ --with-system-readline use installed readline library
+
Some influential environment variables:
CC C compiler command
CFLAGS C compiler flags
@@ -4493,45 +4498,22 @@
done
-# In the Cygwin environment, we need some additional flags.
-echo "$as_me:$LINENO: checking for cygwin" >&5
-echo $ECHO_N "checking for cygwin... $ECHO_C" >&6
-if test "${sim_cv_os_cygwin+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- cat >conftest.$ac_ext <<_ACEOF
-/* confdefs.h. */
-_ACEOF
-cat confdefs.h >>conftest.$ac_ext
-cat >>conftest.$ac_ext <<_ACEOF
-/* end confdefs.h. */
-#ifdef __CYGWIN__
-lose
-#endif
-_ACEOF
-if (eval "$ac_cpp conftest.$ac_ext") 2>&5 |
- $EGREP "lose" >/dev/null 2>&1; then
- sim_cv_os_cygwin=yes
-else
- sim_cv_os_cygwin=no
-fi
-rm -f conftest*
+# Check whether --with-system-readline or --without-system-readline was given.
+if test "${with_system_readline+set}" = set; then
+ withval="$with_system_readline"
-fi
-echo "$as_me:$LINENO: result: $sim_cv_os_cygwin" >&5
-echo "${ECHO_T}$sim_cv_os_cygwin" >&6
+fi;
-if test x$sim_cv_os_cygwin = xyes; then
- TERMCAP='`if test -r ../../libtermcap/libtermcap.a; then echo ../../libtermcap/libtermcap.a; else echo -ltermcap; fi` -luser32'
-else
- echo "$as_me:$LINENO: checking for main in -ltermcap" >&5
-echo $ECHO_N "checking for main in -ltermcap... $ECHO_C" >&6
-if test "${ac_cv_lib_termcap_main+set}" = set; then
+if test "$with_system_readline" = yes; then
+ save_LIBS="$LIBS"
+ echo "$as_me:$LINENO: checking for library containing readline" >&5
+echo $ECHO_N "checking for library containing readline... $ECHO_C" >&6
+if test "${ac_cv_search_readline+set}" = set; then
echo $ECHO_N "(cached) $ECHO_C" >&6
else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-ltermcap $LIBS"
+ ac_func_search_save_LIBS=$LIBS
+ac_cv_search_readline=no
cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
@@ -4539,11 +4521,17 @@
cat >>conftest.$ac_ext <<_ACEOF
/* end confdefs.h. */
-
+/* Override any gcc2 internal prototype to avoid an error. */
+#ifdef __cplusplus
+extern "C"
+#endif
+/* We use char because int might match the return type of a gcc2
+ builtin and then its argument prototype would still apply. */
+char readline ();
int
main ()
{
-main ();
+readline ();
;
return 0;
}
@@ -4570,41 +4558,18 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_cv_lib_termcap_main=yes
+ ac_cv_search_readline="none required"
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_lib_termcap_main=no
fi
rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
-fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_termcap_main" >&5
-echo "${ECHO_T}$ac_cv_lib_termcap_main" >&6
-if test $ac_cv_lib_termcap_main = yes; then
- TERMCAP=-ltermcap
-else
- TERMCAP=""
-fi
-
-fi
-
-
-# We prefer the in-tree readline. Top-level dependencies make sure
-# src/readline (if it's there) is configured before src/sim.
-if test -r ../../readline/Makefile; then
- READLINE=../../readline/libreadline.a
-else
- echo "$as_me:$LINENO: checking for readline in -lreadline" >&5
-echo $ECHO_N "checking for readline in -lreadline... $ECHO_C" >&6
-if test "${ac_cv_lib_readline_readline+set}" = set; then
- echo $ECHO_N "(cached) $ECHO_C" >&6
-else
- ac_check_lib_save_LIBS=$LIBS
-LIBS="-lreadline $TERMCAP $LIBS"
-cat >conftest.$ac_ext <<_ACEOF
+if test "$ac_cv_search_readline" = no; then
+ for ac_lib in readline; do
+ LIBS="-l$ac_lib $ac_func_search_save_LIBS"
+ cat >conftest.$ac_ext <<_ACEOF
/* confdefs.h. */
_ACEOF
cat confdefs.h >>conftest.$ac_ext
@@ -4648,29 +4613,40 @@
ac_status=$?
echo "$as_me:$LINENO: \$? = $ac_status" >&5
(exit $ac_status); }; }; then
- ac_cv_lib_readline_readline=yes
+ ac_cv_search_readline="-l$ac_lib"
+break
else
echo "$as_me: failed program was:" >&5
sed 's/^/| /' conftest.$ac_ext >&5
-ac_cv_lib_readline_readline=no
fi
rm -f conftest.err conftest.$ac_objext \
conftest$ac_exeext conftest.$ac_ext
-LIBS=$ac_check_lib_save_LIBS
+ done
fi
-echo "$as_me:$LINENO: result: $ac_cv_lib_readline_readline" >&5
-echo "${ECHO_T}$ac_cv_lib_readline_readline" >&6
-if test $ac_cv_lib_readline_readline = yes; then
- READLINE=-lreadline
-else
- { { echo "$as_me:$LINENO: error: the required \"readline\" library is missing" >&5
-echo "$as_me: error: the required \"readline\" library is missing" >&2;}
- { (exit 1); exit 1; }; }
+LIBS=$ac_func_search_save_LIBS
fi
+echo "$as_me:$LINENO: result: $ac_cv_search_readline" >&5
+echo "${ECHO_T}$ac_cv_search_readline" >&6
+if test "$ac_cv_search_readline" != no; then
+ test "$ac_cv_search_readline" = "none required" || LIBS="$ac_cv_search_readline $LIBS"
+
+ READLINE=-lreadline
+ READLINE_DEPS=
+ READLINE_CFLAGS=
fi
+ LIBS="$save_LIBS"
+else
+ READLINE='$(READLINE_DIR)/libreadline.a'
+ READLINE_DEPS='$(READLINE)'
+ READLINE_CFLAGS='-I$(READLINE_SRC)/..'
+fi
+
+
+
+
ac_sources="$sim_link_files"
ac_dests="$sim_link_links"
@@ -5389,8 +5365,9 @@
s,@sim_stdio@,$sim_stdio,;t t
s,@sim_trace@,$sim_trace,;t t
s,@sim_profile@,$sim_profile,;t t
-s,@TERMCAP@,$TERMCAP,;t t
s,@READLINE@,$READLINE,;t t
+s,@READLINE_DEPS@,$READLINE_DEPS,;t t
+s,@READLINE_CFLAGS@,$READLINE_CFLAGS,;t t
s,@cgen_breaks@,$cgen_breaks,;t t
s,@LIBOBJS@,$LIBOBJS,;t t
s,@LTLIBOBJS@,$LTLIBOBJS,;t t
diff -Naur -x autom4te.cache gdb-6.8.orig/sim/erc32/configure.ac gdb-6.8-rtems4.9-20080428/sim/erc32/configure.ac
--- gdb-6.8.orig/sim/erc32/configure.ac 2006-12-20 23:35:51.000000000 +0100
+++ gdb-6.8-rtems4.9-20080428/sim/erc32/configure.ac 2008-04-28 13:55:17.000000000 +0200
@@ -11,27 +11,25 @@
AC_CHECK_HEADERS(stdlib.h)
-# In the Cygwin environment, we need some additional flags.
-AC_CACHE_CHECK([for cygwin], sim_cv_os_cygwin,
-[AC_EGREP_CPP(lose, [
-#ifdef __CYGWIN__
-lose
-#endif],[sim_cv_os_cygwin=yes],[sim_cv_os_cygwin=no])])
+AC_ARG_WITH([system-readline],
+ [AS_HELP_STRING([--with-system-readline],
+ [use installed readline library])])
-if test x$sim_cv_os_cygwin = xyes; then
- TERMCAP='`if test -r ../../libtermcap/libtermcap.a; then echo ../../libtermcap/libtermcap.a; else echo -ltermcap; fi` -luser32'
+if test "$with_system_readline" = yes; then
+ save_LIBS="$LIBS"
+ AC_SEARCH_LIBS([readline],[readline],[
+ READLINE=-lreadline
+ READLINE_DEPS=
+ READLINE_CFLAGS=
+ ],[])
+ LIBS="$save_LIBS"
else
- AC_CHECK_LIB(termcap, main, TERMCAP=-ltermcap, TERMCAP="")
-fi
-AC_SUBST(TERMCAP)
-
-# We prefer the in-tree readline. Top-level dependencies make sure
-# src/readline (if it's there) is configured before src/sim.
-if test -r ../../readline/Makefile; then
- READLINE=../../readline/libreadline.a
-else
- AC_CHECK_LIB(readline, readline, READLINE=-lreadline,
- AC_ERROR([the required "readline" library is missing]), $TERMCAP)
+ READLINE='$(READLINE_DIR)/libreadline.a'
+ READLINE_DEPS='$(READLINE)'
+ READLINE_CFLAGS='-I$(READLINE_SRC)/..'
fi
AC_SUBST(READLINE)
+AC_SUBST(READLINE_DEPS)
+AC_SUBST(READLINE_CFLAGS)
+
SIM_AC_OUTPUT
diff -Naur -x autom4te.cache gdb-6.8.orig/sim/erc32/erc32.c gdb-6.8-rtems4.9-20080428/sim/erc32/erc32.c
--- gdb-6.8.orig/sim/erc32/erc32.c 1999-04-16 03:35:00.000000000 +0200
+++ gdb-6.8-rtems4.9-20080428/sim/erc32/erc32.c 2008-04-28 07:18:30.000000000 +0200
@@ -24,6 +24,7 @@
#include <sys/types.h>
#include <stdio.h>
+#include <string.h>
#include <termios.h>
#include <sys/fcntl.h>
#include <sys/file.h>
@@ -413,7 +414,7 @@
if (rom8) mec_memcfg &= ~0x20000;
else mec_memcfg |= 0x20000;
- mem_ramsz = (256 * 1024) << ((mec_memcfg >> 10) & 7);
+ mem_ramsz = (512 * 1024) << ((mec_memcfg >> 10) & 7);
mem_romsz = (128 * 1024) << ((mec_memcfg >> 18) & 7);
if (sparclite_board) {
@@ -1659,7 +1660,7 @@
errmec = 0;
return(1);
}
-#endif;
+#endif
if ((addr >= mem_ramstart) && (addr < (mem_ramstart + mem_ramsz))) {
fetch_bytes (asi, &ramb[addr & mem_rammask], data, sz);
@@ -1736,7 +1737,7 @@
errmec = 0;
return(1);
}
-#endif;
+#endif
if ((addr >= mem_ramstart) && (addr < (mem_ramstart + mem_ramsz))) {
if (mem_accprot) {
diff -Naur -x autom4te.cache gdb-6.8.orig/sim/erc32/exec.c gdb-6.8-rtems4.9-20080428/sim/erc32/exec.c
--- gdb-6.8.orig/sim/erc32/exec.c 2005-03-07 12:09:05.000000000 +0100
+++ gdb-6.8-rtems4.9-20080428/sim/erc32/exec.c 2008-04-28 07:18:30.000000000 +0200
@@ -1713,7 +1713,7 @@
sregs->fdp[rs2 | 1] = sregs->fs[rs2 & ~1];
sregs->fdp[rs2 & ~1] = sregs->fs[rs2 | 1];
default:
- ;
+ break;
}
#endif
@@ -1886,7 +1886,7 @@
sregs->fs[rd & ~1] = sregs->fdp[rd | 1];
sregs->fs[rd | 1] = sregs->fdp[rd & ~1];
default:
- ;
+ break;
}
#endif
if (sregs->fpstate == FP_EXC_PE) {
diff -Naur -x autom4te.cache gdb-6.8.orig/sim/erc32/Makefile.in gdb-6.8-rtems4.9-20080428/sim/erc32/Makefile.in
--- gdb-6.8.orig/sim/erc32/Makefile.in 2008-01-01 23:53:24.000000000 +0100
+++ gdb-6.8-rtems4.9-20080428/sim/erc32/Makefile.in 2008-04-28 07:18:30.000000000 +0200
@@ -18,12 +18,12 @@
## COMMON_PRE_CONFIG_FRAG
-TERMCAP_LIB = @TERMCAP@
+# TERMCAP_LIB = -lncurses
READLINE_LIB = @READLINE@
SIM_OBJS = exec.o erc32.o func.o help.o float.o interf.o
SIM_EXTRA_LIBS = $(READLINE_LIB) $(TERMCAP_LIB) -lm
-SIM_EXTRA_ALL = sis
+SIM_EXTRA_ALL = sis$(EXEEXT)
SIM_EXTRA_INSTALL = install-sis
SIM_EXTRA_CLEAN = clean-sis
@@ -37,8 +37,8 @@
# `sis' doesn't need interf.o.
SIS_OFILES = exec.o erc32.o func.o help.o float.o
-sis: sis.o $(SIS_OFILES) $(COMMON_OBJS) $(LIBDEPS)
- $(CC) $(ALL_CFLAGS) -o sis \
+sis$(EXEEXT): sis.o $(SIS_OFILES) $(COMMON_OBJS) $(LIBDEPS)
+ $(CC) $(ALL_CFLAGS) -o sis$(EXEEXT) \
sis.o $(SIS_OFILES) $(COMMON_OBJS) $(EXTRA_LIBS)
# FIXME: This computes the build host's endianness, doesn't it?
@@ -51,11 +51,11 @@
# Copy the files into directories where they will be run.
install-sis: installdirs
- n=`echo sis | sed '$(program_transform_name)'`; \
- $(INSTALL_PROGRAM) sis$(EXEEXT) $(DESTDIR)$(bindir)/$$n$(EXEEXT)
+ n=`echo sis$(EXEEXT) | sed '$(program_transform_name)'`; \
+ $(INSTALL_PROGRAM) sis$(EXEEXT) $(DESTDIR)$(bindir)/$$n
clean-sis:
- rm -f sis end end.h
+ rm -f sis$(EXEEXT) end end.h
configure:
@echo "Rebuilding configure..."
diff -Naur -x autom4te.cache gdb-6.8.orig/sim/ppc/ppc-instructions gdb-6.8-rtems4.9-20080428/sim/ppc/ppc-instructions
--- gdb-6.8.orig/sim/ppc/ppc-instructions 2006-11-29 16:20:55.000000000 +0100
+++ gdb-6.8-rtems4.9-20080428/sim/ppc/ppc-instructions 2008-04-28 07:18:30.000000000 +0200
@@ -3402,6 +3402,14 @@
case spr_dec:
*rT = cpu_get_decrementer(processor);
break;
+ case spr_tbrl:
+ if (is_64bit_implementation) *rT = TB;
+ else *rT = EXTRACTED64(TB, 32, 63);
+ break;
+ case spr_tbru:
+ if (is_64bit_implementation) *rT = EXTRACTED64(TB, 0, 31);
+ else *rT = EXTRACTED64(TB, 0, 31);
+ break;
case spr_tbu:
case spr_tbl:
/* NOTE - these SPR's are not readable. Use mftb[ul] */
diff -Naur -x autom4te.cache gdb-6.8.orig/sim/ppc/ppc-spr-table gdb-6.8-rtems4.9-20080428/sim/ppc/ppc-spr-table
--- gdb-6.8.orig/sim/ppc/ppc-spr-table 2003-06-22 18:48:12.000000000 +0200
+++ gdb-6.8-rtems4.9-20080428/sim/ppc/ppc-spr-table 2008-04-28 07:18:30.000000000 +0200
@@ -32,6 +32,8 @@
SRR0:26:0:0
SRR1:27:0:0
VRSAVE:256:0:0
+TBRL:268:0:0
+TBRU:269:0:0
SPRG0:272:0:0
SPRG1:273:0:0
SPRG2:274:0:0