*** RTEMS++ TEST ***
INIT - Task.create() - RTEMS[19] invalid thread priority
INIT - Task.create() - RTEMS[00] successful completion
INIT - Task.create() - RTEMS[16] illegal on calling thread
INIT - Task.restart() - RTEMS[14] thread is in wrong state
INIT - Task.start(0xDEADDEAD) - RTEMS[00] successful completion
<pause - screen 1>
* START Task Class test *
TA1 - test argument - argument matched
TA1 - copy constructor - local and this id's match
TA1 - copy constructor - local and this name's match
TA1 - copy operator - local and this id's match
TA1 - copy operator - local and this name's match
TA1 - not owner destroy's task - RTEMS[23] not owner of resource
TA1 - connect to a local valid task name - RTEMS[00] successful completion
TA1 - connect to an invalid task name - RTEMS[03] invalid object name
SELF - connect to a task on an invalid node - RTEMS[21] invalid node id
TA1 - restart from a non-owner - RTEMS[23] not owner of resource
<pause - screen 2>
TA1 - wake after 0 secs - RTEMS[00] successful completion
TA1 - wake after 500 msecs - RTEMS[00] successful completion
TA1 - wake after 5 secs - RTEMS[00] successful completion
TA1 - wake when - to do
TA1 - connected object wake after 0 secs - RTEMS[00] successful completion
TA1 - connected object wake after 500 msecs - RTEMS[00] successful completion
TA1 - connected object wake after 5 secs - RTEMS[00] successful completion
TA1 - connected object wake when - to do
SELF - self object wake after 0 secs - RTEMS[00] successful completion
SELF - self object wake after 500 msecs - RTEMS[00] successful completion
SELF - self object wake after 5 secs - RTEMS[00] successful completion
SELF - self object wake when - to do
TA1 - get priority - RTEMS[00] successful completion, priority is 10
TA1 - set priority to 512 - RTEMS[19] invalid thread priority
TA1 - set priority to 25 - RTEMS[00] successful completion
TA1 - set priority to original - RTEMS[00] successful completion, priority was 25
TA1 - connected object get priority - RTEMS[00] successful completion, priority is 10
TA1 - connected object set priority to 512 - RTEMS[19] invalid thread priority
TA1 - connected object set priority to 25 - RTEMS[00] successful completion
TA1 - connected object set priority to original - RTEMS[00] successful completion, priority was 25
SELF - self object get priority - RTEMS[00] successful completion, priority is 10
SELF - self object set priority to 512 - RTEMS[19] invalid thread priority
SELF - self object set priority to 25 - RTEMS[00] successful completion
SELF - self object set priority to original - RTEMS[00] successful completion, priority was 25
TA1 - get note - RTEMS[00] successful completion, note is 0
TA1 - get with bad notepad number - RTEMS[10] number was invalid, note is 0
TA1 - set note to 0xDEADBEEF - RTEMS[00] successful completion
TA1 - get note - RTEMS[00] successful completion, note is 0xDEADBEEF
TA1 - set note to original value - RTEMS[00] successful completion
TA1 - connected object get note - RTEMS[00] successful completion, notepad is 0
TA1 - connected object get with bad notepad number - RTEMS[10] number was invalid, note is 0
TA1 - connected object set note to 0xDEADBEEF - RTEMS[00] successful completion
TA1 - connected object get note - RTEMS[00] successful completion, note is 0xDEADBEEF
TA1 - connected object set note to original value - RTEMS[00] successful completion
SELF - self object get note - RTEMS[00] successful completion, note is 0
SELF - self object get with bad notepad number - RTEMS[10] number was invalid, note is 0
SELF - self object set note to 0xDEADBEEF - RTEMS[00] successful completion
SELF - self object get note - RTEMS[00] successful completion, notepad is 0xDEADBEEF
SELF - self object set note to original value - RTEMS[00] successful completion
* END Task Class test *
<pause - screen 3>
* START TaskMode Class test *
SELF - get mode - RTEMS[00] successful completion,
mode is 0x00000100, RTEMS_NO_PREEMPT RTEMS_NO_TIMESLICE RTEMS_NO_ASR INTMASK=0
SELF - get preemption state - RTEMS[00] successful completion,
mode is 0x00000100, RTEMS_NO_PREEMPT
SELF - set preemption state to RTEMS_PREEMPT - RTEMS[00] successful completion,
mode is 0x00000000, RTEMS_PREEMPT RTEMS_TIMESLICE RTEMS_NO_ASR INTMASK=0
SELF - set preemption state to RTEMS_NO_PREEMPT - RTEMS[00] successful completion,
mode is 0x00000100, RTEMS_NO_PREEMPT RTEMS_NO_TIMESLICE RTEMS_NO_ASR INTMASK=0
SELF - get timeslice state - RTEMS[00] successful completion,
mode is 0x00000000, RTEMS_TIMESLICE
SELF - set timeslice state to RTEMS_TIMESLICE - RTEMS[00] successful completion,
mode is 0x00000300, RTEMS_NO_PREEMPT RTEMS_NO_TIMESLICE RTEMS_NO_ASR INTMASK=0
SELF - set timeslice state to RTEMS_NO_TIMESLICE - RTEMS[00] successful completion,
mode is 0x00000100, RTEMS_NO_PREEMPT RTEMS_NO_TIMESLICE RTEMS_NO_ASR INTMASK=0
SELF - get asr state - RTEMS[00] successful completion,
mode is 0x00000000, RTEMS_NO_ASR
SELF - set asr state to RTEMS_ASR - RTEMS[00] successful completion,
mode is 0x00000100, RTEMS_NO_PREEMPT RTEMS_NO_TIMESLICE RTEMS_NO_ASR INTMASK=0
SELF - set asr state to RTEMS_NO_ASR - RTEMS[00] successful completion,
mode is 0x00000500, RTEMS_NO_PREEMPT RTEMS_NO_TIMESLICE RTEMS_ASR INTMASK=0
SELF - get current interrupt level - RTEMS[00] successful completion, level is 0
SELF - set interrupt level to 102 - RTEMS[00] successful completion
SELF - set interrupt level to original level - RTEMS[00] successful completion, level was 0
SELF - set mode to original mode - RTEMS[00] successful completion,
mode is 0x00000100, RTEMS_NO_PREEMPT RTEMS_NO_TIMESLICE RTEMS_NO_ASR INTMASK=0
* END TaskMode Class test *
<pause - screen 4>
* START Event Class test *
TA1 - create task 2 - RTEMS[00] successful completion
TA1 - start task 2 - RTEMS[00] successful completion
TA1 - construct event connecting to task 2 - RTEMS[00] successful completion
TA2 - event no wait - RTEMS[13] request not satisfied
TA2 - event 5 secs timeout - RTEMS[06] timed out waiting
TA2 - event wait forever for signal 0 from TA1 ....
TA1 - send event signal 0 using the task id - RTEMS[00] successful completion
TA2 - RTEMS[00] successful completion, signals out are 0x00000001
TA2 - event wait forever for signal 0 from TA1 ....
TA1 - send event signal 0 using the task object reference - RTEMS[00] successful completion
TA2 - RTEMS[00] successful completion, signals out are 0x00000001
TA2 - event wait forever for signal 31 from TA1 ....
TA1 - send event signal 31 using connected id - RTEMS[00] successful completion
TA2 - RTEMS[00] successful completion, signals out are 0x80000000
TA2 - event wait forever for signal 0 and 31 from TA1 ....
TA1 - send event signal 0 and 31 - RTEMS[00] successful completion
TA1 - waiting 5 secs for TA2 to finish
TA2 - RTEMS[00] successful completion, signals out are 0x80000001
TA2 - send event signal 1 - RTEMS[00] successful completion
TA2 - event wait forever for signal 1 from TA2 - RTEMS[00] successful completion, signals out are 0x00000002
TA2 - destory itself
* END Event Class test *
<pause - screen 5>
* START Interrupt Class test *
do not know a portable BSP type interrupt test
* END Interrupt Class test *
<pause - screen 6>
* START MessageQueue Class test *
TA1 - construct message queue 1 with no memory error - RTEMS[05] too many
TA1 - construct/create message queue 2 - RTEMS[00] successful completion
TA1 - send u1 to mq_2 - RTEMS[00] successful completion
TA1 - urgent send u2 to mq_2 - RTEMS[00] successful completion
TA1 - create task 3_1 - RTEMS[00] successful completion
TA1 - start task 3_1 - RTEMS[00] successful completion
TA1 - create task 3_2 - RTEMS[00] successful completion
TA1 - start task 3_2 - RTEMS[00] successful completion
TA31 - construction connect mq_2 - RTEMS[00] successful completion
TA31 - loopback from mq_2 to mq_2 ...
TA31 - mq_2 receive - RTEMS[00] successful completion, size=12, message string size=11
TA31 - loopback to mq_2 - RTEMS[00] successful completion
TA32 - construction connect mq_2 - RTEMS[00] successful completion
TA32 - loopback from mq_2 to mq_2 ...
TA32 - mq_2 receive - RTEMS[00] successful completion, size=12, message string size=11
TA32 - loopback to mq_2 - RTEMS[00] successful completion
TA1 - receive u2 on mq_2 ...
TA1 - RTEMS[00] successful completion
TA1 - message u2 received correctly
TA1 - receive u1 on mq_2 ...
TA1 - RTEMS[00] successful completion
TA1 - message u1 received correctly
TA31 - loopback from mq_2 to mq_2 ...
TA32 - loopback from mq_2 to mq_2 ...
TA1 - broadcast send b1 ...
TA1 - mq_2 broadcast send - RTEMS[00] successful completion, count=2
TA31 - mq_2 receive - RTEMS[00] successful completion, size=18, message string size=17
TA31 - loopback to mq_2 - RTEMS[00] successful completion
TA31 - destory itself
TA32 - mq_2 receive - RTEMS[00] successful completion, size=18, message string size=17
TA32 - loopback to mq_2 - RTEMS[00] successful completion
TA32 - destory itself
TA1 - receive message b1 on mq_2 from TA31...
TA1 - RTEMS[00] successful completion
TA1 - message b1 received correctly
TA1 - receive message b1 on mq_2 from TA31...
TA1 - RTEMS[00] successful completion
TA1 - message b1 received correctly
TA1 - send f1 to mq_2 - RTEMS[00] successful completion
TA1 - send f1 to mq_2 - RTEMS[00] successful completion
TA1 - send f1 to mq_2 - RTEMS[00] successful completion
TA1 - flush mq_2 - RTEMS[00] successful completion, flushed=3
* END MessageQueue Class test *
<pause - screen 7>
