blob: 7fb8f512a641547999b1565875b23d27dff01ffa (
plain) (
tree)
|
|
/*
* dpram.c
*
* MPC8260 dual-port RAM allocation routines
*
* Based on code in mpc8xx which is
* Based on code (alloc860.c in eth_comm port) by
* Jay Monkman (jmonkman@frasca.com),
* which, in turn, is based on code by
* W. Eric Norum (eric@skatter.usask.ca).
*
*
* Modifications :
* Copyright (c) 1999, National Research Council of Canada
*
* MPC8260 modifications Andy Dachs, <a.dachs@sstl.co.uk>
* Surrey Satellite Technology Limited, 2001
*/
#include <rtems.h>
#include <mpc8260.h>
#include <mpc8260/cpm.h>
/*
* Allocation order:
* - Dual-Port RAM section 0
* - Dual-Port RAM section 1
* - Dual-Port RAM section 2
* - Dual-Port RAM section 3
*/
static struct {
unsigned8 *base;
unsigned int size;
unsigned int used;
} dpram_regions[] = {
/* { (char *)&m8260.dpram0[0], sizeof m8260.dpram0, 0 },*/
{ (char *)&m8260.dpram1[0], sizeof m8260.dpram1, 0 },
/* { (char *)&m8260.dpram2[0], sizeof m8260.dpram2, 0 },*/
{ (char *)&m8260.dpram3[0], sizeof m8260.dpram3, 0 }
};
#define NUM_DPRAM_REGIONS (sizeof(dpram_regions) / sizeof(dpram_regions[0]))
void *
m8xx_dpram_allocate( unsigned int byte_count )
{
unsigned int i;
ISR_Level level;
void *blockp = NULL;
byte_count = (byte_count + 3) & ~0x3;
/*
* Running with interrupts disabled is usually considered bad
* form, but this routine is probably being run as part of an
* initialization sequence so the effect shouldn't be too severe.
*/
_ISR_Disable (level);
for ( i = 0; i < NUM_DPRAM_REGIONS; i++ ) {
/*
* Verify that the region is available for use.
* This test is necessary because if extra microcode modules
* are installed, some regions are locked and unavailable.
* See MPC860 User's Manual Pages 19-9 to 19-11.
*/
if (dpram_regions[i].used == 0) {
volatile unsigned char *cp = dpram_regions[i].base;
*cp = 0xAA;
if (*cp != 0xAA)
dpram_regions[i].used = dpram_regions[i].size;
else {
*cp = 0x55;
if (*cp != 0x55)
dpram_regions[i].used = dpram_regions[i].size;
}
*cp = 0x0;
}
if (dpram_regions[i].size - dpram_regions[i].used >= byte_count) {
blockp = dpram_regions[i].base + dpram_regions[i].used;
dpram_regions[i].used += byte_count;
break;
}
}
_ISR_Enable(level);
if (blockp == NULL)
rtems_panic("Can't allocate %d bytes of dual-port RAM.\n", byte_count);
return blockp;
}
|