|
|
/*
* File: MCD_dma.h
* Purpose: Main header file for multi-channel DMA API.
*
* Notes:
*/
#ifndef _MCD_API_H
#define _MCD_API_H
/*
* Turn Execution Unit tasks ON (#define) or OFF (#undef)
*/
#define MCD_INCLUDE_EU
/*
* Number of DMA channels
*/
#define NCHANNELS 16
/*
* Total number of variants
*/
#ifdef MCD_INCLUDE_EU
#define NUMOFVARIANTS 6
#else
#define NUMOFVARIANTS 4
#endif
/*
* Define sizes of the various tables
*/
#define TASK_TABLE_SIZE (NCHANNELS*32)
#define VAR_TAB_SIZE (128)
#define CONTEXT_SAVE_SIZE (128)
#define FUNCDESC_TAB_SIZE (256)
#ifdef MCD_INCLUDE_EU
#define FUNCDESC_TAB_NUM 16
#else
#define FUNCDESC_TAB_NUM 1
#endif
#ifndef DEFINESONLY
/*
* Portability typedefs
*/
typedef int s32;
typedef unsigned int u32;
typedef short s16;
typedef unsigned short u16;
typedef char s8;
typedef unsigned char u8;
/*
* These structures represent the internal registers of the
* multi-channel DMA
*/
struct dmaRegs_s {
u32 taskbar; /* task table base address register */
u32 currPtr;
u32 endPtr;
u32 varTablePtr;
u16 dma_rsvd0;
u16 ptdControl; /* ptd control */
u32 intPending; /* interrupt pending register */
u32 intMask; /* interrupt mask register */
u16 taskControl[16]; /* task control registers */
u8 priority[32]; /* priority registers */
u32 initiatorMux; /* initiator mux control */
u32 taskSize0; /* task size control register 0. */
u32 taskSize1; /* task size control register 1. */
u32 dma_rsvd1; /* reserved */
u32 dma_rsvd2; /* reserved */
u32 debugComp1; /* debug comparator 1 */
u32 debugComp2; /* debug comparator 2 */
u32 debugControl; /* debug control */
u32 debugStatus; /* debug status */
u32 ptdDebug; /* priority task decode debug */
u32 dma_rsvd3[31]; /* reserved */
};
typedef volatile struct dmaRegs_s dmaRegs;
#endif
/*
* PTD contrl reg bits
*/
#define PTD_CTL_TSK_PRI 0x8000
#define PTD_CTL_COMM_PREFETCH 0x0001
/*
* Task Control reg bits and field masks
*/
#define TASK_CTL_EN 0x8000
#define TASK_CTL_VALID 0x4000
#define TASK_CTL_ALWAYS 0x2000
#define TASK_CTL_INIT_MASK 0x1f00
#define TASK_CTL_ASTRT 0x0080
#define TASK_CTL_HIPRITSKEN 0x0040
#define TASK_CTL_HLDINITNUM 0x0020
#define TASK_CTL_ASTSKNUM_MASK 0x000f
/*
* Priority reg bits and field masks
*/
#define PRIORITY_HLD 0x80
#define PRIORITY_PRI_MASK 0x07
/*
* Debug Control reg bits and field masks
*/
#define DBG_CTL_BLOCK_TASKS_MASK 0xffff0000
#define DBG_CTL_AUTO_ARM 0x00008000
#define DBG_CTL_BREAK 0x00004000
#define DBG_CTL_COMP1_TYP_MASK 0x00003800
#define DBG_CTL_COMP2_TYP_MASK 0x00000070
#define DBG_CTL_EXT_BREAK 0x00000004
#define DBG_CTL_INT_BREAK 0x00000002
/*
* PTD Debug reg selector addresses
* This reg must be written with a value to show the contents of
* one of the desired internal register.
*/
#define PTD_DBG_REQ 0x00 /* shows the state of 31 initiators */
#define PTD_DBG_TSK_VLD_INIT 0x01 /* shows which 16 tasks are valid and
have initiators asserted */
/*
* General return values
*/
#define MCD_OK 0
#define MCD_ERROR -1
#define MCD_TABLE_UNALIGNED -2
#define MCD_CHANNEL_INVALID -3
/*
* MCD_initDma input flags
*/
#define MCD_RELOC_TASKS 0x00000001
#define MCD_NO_RELOC_TASKS 0x00000000
#define MCD_COMM_PREFETCH_EN 0x00000002 /* Commbus Prefetching - MCF547x/548x ONLY */
/*
* MCD_dmaStatus Status Values for each channel
*/
#define MCD_NO_DMA 1 /* No DMA has been requested since reset */
#define MCD_IDLE 2 /* DMA active, but the initiator is currently inactive */
#define MCD_RUNNING 3 /* DMA active, and the initiator is currently active */
#define MCD_PAUSED 4 /* DMA active but it is currently paused */
#define MCD_HALTED 5 /* the most recent DMA has been killed with MCD_killTask() */
#define MCD_DONE 6 /* the most recent DMA has completed. */
/*
* MCD_startDma parameter defines
*/
/*
* Constants for the funcDesc parameter
*/
/* Byte swapping: */
#define MCD_NO_BYTE_SWAP 0x00045670 /* to disable byte swapping. */
#define MCD_BYTE_REVERSE 0x00076540 /* to reverse the bytes of each u32 of the DMAed data. */
#define MCD_U16_REVERSE 0x00067450 /* to reverse the 16-bit halves of
each 32-bit data value being DMAed.*/
#define MCD_U16_BYTE_REVERSE 0x00054760 /* to reverse the byte halves of each
16-bit half of each 32-bit data value DMAed */
#define MCD_NO_BIT_REV 0x00000000 /* do not reverse the bits of each byte DMAed. */
#define MCD_BIT_REV 0x00088880 /* reverse the bits of each byte DMAed */
/* CRCing: */
#define MCD_CRC16 0xc0100000 /* to perform CRC-16 on DMAed data. */
#define MCD_CRCCCITT 0xc0200000 /* to perform CRC-CCITT on DMAed data. */
#define MCD_CRC32 0xc0300000 /* to perform CRC-32 on DMAed data. */
#define MCD_CSUMINET 0xc0400000 /* to perform internet checksums on DMAed data.*/
#define MCD_NO_CSUM 0xa0000000 /* to perform no checksumming. */
#define MCD_FUNC_NOEU1 (MCD_NO_BYTE_SWAP | MCD_NO_BIT_REV | MCD_NO_CSUM)
#define MCD_FUNC_NOEU2 (MCD_NO_BYTE_SWAP | MCD_NO_CSUM)
/*
* Constants for the flags parameter
*/
#define MCD_TT_FLAGS_RL 0x00000001 /* Read line */
#define MCD_TT_FLAGS_CW 0x00000002 /* Combine Writes */
#define MCD_TT_FLAGS_SP 0x00000004 /* Speculative prefetch(XLB) MCF547x/548x ONLY */
#define MCD_TT_FLAGS_MASK 0x000000ff
#define MCD_TT_FLAGS_DEF (MCD_TT_FLAGS_RL | MCD_TT_FLAGS_CW)
#define MCD_SINGLE_DMA 0x00000100 /* Unchained DMA */
#define MCD_CHAIN_DMA /* TBD */
#define MCD_EU_DMA /* TBD */
#define MCD_FECTX_DMA 0x00001000 /* FEC TX ring DMA */
#define MCD_FECRX_DMA 0x00002000 /* FEC RX ring DMA */
/* these flags are valid for MCD_startDma and the chained buffer descriptors */
#define MCD_BUF_READY 0x80000000 /* indicates that this buffer is now under the DMA's control */
#define MCD_WRAP 0x20000000 /* to tell the FEC Dmas to wrap to the first BD */
#define MCD_INTERRUPT 0x10000000 /* to generate an interrupt after completion of the DMA. */
#define MCD_END_FRAME 0x08000000 /* tell the DMA to end the frame when transferring
last byte of data in buffer */
#define MCD_CRC_RESTART 0x40000000 /* to empty out the accumulated checksum
prior to performing the DMA. */
/* Defines for the FEC buffer descriptor control/status word*/
#define MCD_FEC_BUF_READY 0x8000
#define MCD_FEC_WRAP 0x2000
#define MCD_FEC_INTERRUPT 0x1000
#define MCD_FEC_END_FRAME 0x0800
/*
* Defines for general intuitiveness
*/
#define MCD_TRUE 1
#define MCD_FALSE 0
/*
* Three different cases for destination and source.
*/
#define MINUS1 -1
#define ZERO 0
#define PLUS1 1
#ifndef DEFINESONLY
/* Task Table Entry struct*/
typedef struct {
u32 TDTstart; /* task descriptor table start */
u32 TDTend; /* task descriptor table end */
u32 varTab; /* variable table start */
u32 FDTandFlags; /* function descriptor table start and flags */
volatile u32 descAddrAndStatus;
volatile u32 modifiedVarTab;
u32 contextSaveSpace; /* context save space start */
u32 literalBases;
} TaskTableEntry;
/* Chained buffer descriptor */
typedef volatile struct MCD_bufDesc_struct MCD_bufDesc;
struct MCD_bufDesc_struct {
u32 flags; /* flags describing the DMA */
u32 csumResult; /* checksum from checksumming performed since last checksum reset */
s8 *srcAddr; /* the address to move data from */
s8 *destAddr; /* the address to move data to */
s8 *lastDestAddr; /* the last address written to */
u32 dmaSize; /* the number of bytes to transfer independent of the transfer size */
MCD_bufDesc *next; /* next buffer descriptor in chain */
u32 info; /* private information about this descriptor; DMA does not affect it */
};
/* Progress Query struct */
typedef volatile struct MCD_XferProg_struct {
s8 *lastSrcAddr; /* the most-recent or last, post-increment source address */
s8 *lastDestAddr; /* the most-recent or last, post-increment destination address */
u32 dmaSize; /* the amount of data transferred for the current buffer */
MCD_bufDesc *currBufDesc;/* pointer to the current buffer descriptor being DMAed */
} MCD_XferProg;
/* FEC buffer descriptor */
typedef volatile struct MCD_bufDescFec_struct {
u16 statCtrl;
u16 length;
u32 dataPointer;
} MCD_bufDescFec;
/*************************************************************************/
/*
* API function Prototypes - see MCD_dmaApi.c for further notes
*/
/*
* MCD_startDma starts a particular kind of DMA .
*/
int MCD_startDma (
int channel, /* the channel on which to run the DMA */
s8 *srcAddr, /* the address to move data from, or buffer-descriptor address */
s16 srcIncr, /* the amount to increment the source address per transfer */
s8 *destAddr, /* the address to move data to */
s16 destIncr, /* the amount to increment the destination address per transfer */
u32 dmaSize, /* the number of bytes to transfer independent of the transfer size */
u32 xferSize, /* the number bytes in of each data movement (1, 2, or 4) */
u32 initiator, /* what device initiates the DMA */
int priority, /* priority of the DMA */
u32 flags, /* flags describing the DMA */
u32 funcDesc /* a description of byte swapping, bit swapping, and CRC actions */
);
/*
* MCD_initDma() initializes the DMA API by setting up a pointer to the DMA
* registers, relocating and creating the appropriate task structures, and
* setting up some global settings
*/
int MCD_initDma (dmaRegs *sDmaBarAddr, void *taskTableDest, u32 flags);
/*
* MCD_dmaStatus() returns the status of the DMA on the requested channel.
*/
int MCD_dmaStatus (int channel);
/*
* MCD_XferProgrQuery() returns progress of DMA on requested channel
*/
int MCD_XferProgrQuery (int channel, MCD_XferProg *progRep);
/*
* MCD_killDma() halts the DMA on the requested channel, without any
* intention of resuming the DMA.
*/
int MCD_killDma (int channel);
/*
* MCD_continDma() continues a DMA which as stopped due to encountering an
* unready buffer descriptor.
*/
int MCD_continDma (int channel);
/*
* MCD_pauseDma() pauses the DMA on the given channel ( if any DMA is
* running on that channel).
*/
int MCD_pauseDma (int channel);
/*
* MCD_resumeDma() resumes the DMA on a given channel (if any DMA is
* running on that channel).
*/
int MCD_resumeDma (int channel);
/*
* MCD_csumQuery provides the checksum/CRC after performing a non-chained DMA
*/
int MCD_csumQuery (int channel, u32 *csum);
/*
* MCD_getCodeSize provides the packed size required by the microcoded task
* and structures.
*/
int MCD_getCodeSize(void);
/*
* MCD_getVersion provides a pointer to a version string and returns a
* version number.
*/
int MCD_getVersion(char **longVersion);
/* macro for setting a location in the variable table */
#define MCD_SET_VAR(taskTab,idx,value) ((u32 *)(taskTab)->varTab)[idx] = value
/* Note that MCD_SET_VAR() is invoked many times in firing up a DMA function,
so I'm avoiding surrounding it with "do {} while(0)" */
#endif /* DEFINESONLY */
#endif /* _MCD_API_H */
|