blob: e613ee6e73e78a7e6bf6160db7041007c7f5234c (
plain) (
tree)
|
|
/* erc32.h
*
* This include file contains information pertaining to the LEON-1.
* The LEON-1 is a custom SPARC V7 implementation.
* This CPU has a number of on-board peripherals and
* was developed by the European Space Agency to target space applications.
*
* NOTE: Other than where absolutely required, this version currently
* supports only the peripherals and bits used by the basic board
* support package. This includes at least significant pieces of
* the following items:
*
* + UART Channels A and B
* + Real Time Clock
* + Memory Control Register
* + Interrupt Control
*
* COPYRIGHT (c) 1989-1998.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.OARcorp.com/rtems/license.html.
*
* Ported to LEON implementation of the SPARC by On-Line Applications
* Research Corporation (OAR) under contract to the European Space
* Agency (ESA).
*
* LEON modifications of respective RTEMS file: COPYRIGHT (c) 1995.
* European Space Agency.
*
* $Id$
*/
#ifndef _INCLUDE_LEON_h
#define _INCLUDE_LEON_h
#include <rtems/score/sparc.h>
#ifdef __cplusplus
extern "C" {
#endif
/*
* Interrupt Sources
*
* The interrupt source numbers directly map to the trap type and to
* the bits used in the Interrupt Clear, Interrupt Force, Interrupt Mask,
* and the Interrupt Pending Registers.
*/
#define LEON_INTERRUPT_CORRECTABLE_MEMORY_ERROR 1
#define LEON_INTERRUPT_UART_2_RX_TX 2
#define LEON_INTERRUPT_UART_1_RX_TX 3
#define LEON_INTERRUPT_EXTERNAL_0 4
#define LEON_INTERRUPT_EXTERNAL_1 5
#define LEON_INTERRUPT_EXTERNAL_2 6
#define LEON_INTERRUPT_EXTERNAL_3 7
#define LEON_INTERRUPT_TIMER1 8
#define LEON_INTERRUPT_TIMER2 9
#define LEON_INTERRUPT_EMPTY1 10
#define LEON_INTERRUPT_EMPTY2 11
#define LEON_INTERRUPT_EMPTY3 12
#define LEON_INTERRUPT_EMPTY4 13
#define LEON_INTERRUPT_EMPTY5 14
#define LEON_INTERRUPT_EMPTY6 15
#ifndef ASM
/*
* Trap Types for on-chip peripherals
*
* Source: Table 8 - Interrupt Trap Type and Default Priority Assignments
*
* NOTE: The priority level for each source corresponds to the least
* significant nibble of the trap type.
*/
#define LEON_TRAP_TYPE( _source ) SPARC_ASYNCHRONOUS_TRAP((_source) + 0x10)
#define LEON_TRAP_SOURCE( _trap ) ((_trap) - 0x10)
#define LEON_INT_TRAP( _trap ) \
( (_trap) >= LEON_TRAP_TYPE( LEON_INTERRUPT_CORRECTABLE_MEMORY_ERROR ) && \
(_trap) <= LEON_TRAP_TYPE( LEON_INTERRUPT_EMPTY6 ) )
/*
* Structure for LEON memory mapped registers.
*
* Source: Section 6.1 - On-chip registers
*
* NOTE: There is only one of these structures per CPU, its base address
* is 0x80000000, and the variable LEON_REG is placed there by the
* linkcmds file.
*/
typedef struct {
volatile unsigned int Memory_Config_1;
volatile unsigned int Memory_Config_2;
volatile unsigned int Edac_Control;
volatile unsigned int Failed_Address;
volatile unsigned int Memory_Status;
volatile unsigned int Cache_Control;
volatile unsigned int Power_Down;
volatile unsigned int Write_Protection_1;
volatile unsigned int Write_Protection_2;
volatile unsigned int Leon_Configuration;
volatile unsigned int dummy2;
volatile unsigned int dummy3;
volatile unsigned int dummy4;
volatile unsigned int dummy5;
volatile unsigned int dummy6;
volatile unsigned int dummy7;
volatile unsigned int Timer_Counter_1;
volatile unsigned int Timer_Reload_1;
volatile unsigned int Timer_Control_1;
volatile unsigned int Watchdog;
volatile unsigned int Timer_Counter_2;
volatile unsigned int Timer_Reload_2;
volatile unsigned int Timer_Control_2;
volatile unsigned int dummy8;
volatile unsigned int Scaler_Counter;
volatile unsigned int Scaler_Reload;
volatile unsigned int dummy9;
volatile unsigned int dummy10;
volatile unsigned int UART_Channel_1;
volatile unsigned int UART_Status_1;
volatile unsigned int UART_Control_1;
volatile unsigned int UART_Scaler_1;
volatile unsigned int UART_Channel_2;
volatile unsigned int UART_Status_2;
volatile unsigned int UART_Control_2;
volatile unsigned int UART_Scaler_2;
volatile unsigned int Interrupt_Mask;
volatile unsigned int Interrupt_Pending;
volatile unsigned int Interrupt_Force;
volatile unsigned int Interrupt_Clear;
volatile unsigned int PIO_Data;
volatile unsigned int PIO_Direction;
volatile unsigned int PIO_Interrupt;
} LEON_Register_Map;
#endif
/*
* The following constants are intended to be used ONLY in assembly
* language files.
*
* NOTE: The intended style of usage is to load the address of LEON REGS
* into a register and then use these as displacements from
* that register.
*/
#ifdef ASM
#define LEON_REG_MEMCFG1_OFFSET 0x00
#define LEON_REG_MEMCFG2_OFFSET 0x04
#define LEON_REG_EDACCTRL_OFFSET 0x08
#define LEON_REG_FAILADDR_OFFSET 0x0C
#define LEON_REG_MEMSTATUS_OFFSET 0x10
#define LEON_REG_CACHECTRL_OFFSET 0x14
#define LEON_REG_POWERDOWN_OFFSET 0x18
#define LEON_REG_WRITEPROT1_OFFSET 0x1C
#define LEON_REG_WRITEPROT2_OFFSET 0x20
#define LEON_REG_LEONCONF_OFFSET 0x24
#define LEON_REG_UNIMPLEMENTED_2_OFFSET 0x28
#define LEON_REG_UNIMPLEMENTED_3_OFFSET 0x2C
#define LEON_REG_UNIMPLEMENTED_4_OFFSET 0x30
#define LEON_REG_UNIMPLEMENTED_5_OFFSET 0x34
#define LEON_REG_UNIMPLEMENTED_6_OFFSET 0x38
#define LEON_REG_UNIMPLEMENTED_7_OFFSET 0x3C
#define LEON_REG_TIMERCNT1_OFFSET 0x40
#define LEON_REG_TIMERLOAD1_OFFSET 0x44
#define LEON_REG_TIMERCTRL1_OFFSET 0x48
#define LEON_REG_WDOG_OFFSET 0x4C
#define LEON_REG_TIMERCNT2_OFFSET 0x50
#define LEON_REG_TIMERLOAD2_OFFSET 0x54
#define LEON_REG_TIMERCTRL2_OFFSET 0x58
#define LEON_REG_UNIMPLEMENTED_8_OFFSET 0x5C
#define LEON_REG_SCALERCNT_OFFSET 0x60
#define LEON_REG_SCALER_LOAD_OFFSET 0x64
#define LEON_REG_UNIMPLEMENTED_9_OFFSET 0x68
#define LEON_REG_UNIMPLEMENTED_10_OFFSET 0x6C
#define LEON_REG_UARTDATA1_OFFSET 0x70
#define LEON_REG_UARTSTATUS1_OFFSET 0x74
#define LEON_REG_UARTCTRL1_OFFSET 0x78
#define LEON_REG_UARTSCALER1_OFFSET 0x7C
#define LEON_REG_UARTDATA2_OFFSET 0x80
#define LEON_REG_UARTSTATUS2_OFFSET 0x84
#define LEON_REG_UARTCTRL2_OFFSET 0x88
#define LEON_REG_UARTSCALER2_OFFSET 0x8C
#define LEON_REG_IRQMASK_OFFSET 0x90
#define LEON_REG_IRQPEND_OFFSET 0x94
#define LEON_REG_IRQFORCE_OFFSET 0x98
#define LEON_REG_IRQCLEAR_OFFSET 0x9C
#define LEON_REG_PIODATA_OFFSET 0xA0
#define LEON_REG_PIODIR_OFFSET 0xA4
#define LEON_REG_PIOIRQ_OFFSET 0xA8
#define LEON_REG_SIM_RAM_SIZE_OFFSET 0xF4
#define LEON_REG_SIM_ROM_SIZE_OFFSET 0xF8
#endif
/*
* The following defines the bits in Memory Configuration Register 1.
*/
#define LEON_MEMORY_CONFIGURATION_PROM_SIZE_MASK 0x0003C000
/*
* The following defines the bits in Memory Configuration Register 1.
*/
#define LEON_MEMORY_CONFIGURATION_RAM_SIZE_MASK 0x00001E00
/*
* The following defines the bits in the Timer Control Register.
*/
#define LEON_REG_TIMER_CONTROL_EN 0x00000001 /* 1 = enable counting */
/* 0 = hold scalar and counter */
#define LEON_REG_TIMER_CONTROL_RL 0x00000002 /* 1 = reload at 0 */
/* 0 = stop at 0 */
#define LEON_REG_TIMER_CONTROL_LD 0x00000004 /* 1 = load counter */
/* 0 = no function */
/*
* The following defines the bits in the UART Control Registers.
*
*/
#define LEON_REG_UART_CONTROL_RTD 0x000000FF /* RX/TX data */
/*
* The following defines the bits in the LEON UART Status Registers.
*/
#define LEON_REG_UART_STATUS_DR 0x00000001 /* Data Ready */
#define LEON_REG_UART_STATUS_TSE 0x00000002 /* TX Send Register Empty */
#define LEON_REG_UART_STATUS_THE 0x00000004 /* TX Hold Register Empty */
#define LEON_REG_UART_STATUS_BR 0x00000008 /* Break Error */
#define LEON_REG_UART_STATUS_OE 0x00000010 /* RX Overrun Error */
#define LEON_REG_UART_STATUS_PE 0x00000020 /* RX Parity Error */
#define LEON_REG_UART_STATUS_FE 0x00000040 /* RX Framing Error */
#define LEON_REG_UART_STATUS_ERR 0x00000078 /* Error Mask */
/*
* The following defines the bits in the LEON UART Status Registers.
*/
#define LEON_REG_UART_CTRL_RE 0x00000001 /* Receiver enable */
#define LEON_REG_UART_CTRL_TE 0x00000002 /* Transmitter enable */
#define LEON_REG_UART_CTRL_RI 0x00000004 /* Receiver interrupt enable */
#define LEON_REG_UART_CTRL_TI 0x00000008 /* Transmitter interrupt enable */
#define LEON_REG_UART_CTRL_PS 0x00000010 /* Parity select */
#define LEON_REG_UART_CTRL_PE 0x00000020 /* Parity enable */
#define LEON_REG_UART_CTRL_FL 0x00000040 /* Flow control enable */
#define LEON_REG_UART_CTRL_LB 0x00000080 /* Loop Back enable */
#ifndef ASM
/*
* This is used to manipulate the on-chip registers.
*
* The following symbol must be defined in the linkcmds file and point
* to the correct location.
*/
extern LEON_Register_Map LEON_REG;
/*
* Macros to manipulate the Interrupt Clear, Interrupt Force, Interrupt Mask,
* and the Interrupt Pending Registers.
*
* NOTE: For operations which are not atomic, this code disables interrupts
* to guarantee there are no intervening accesses to the same register.
* The operations which read the register, modify the value and then
* store the result back are vulnerable.
*/
#define LEON_Clear_interrupt( _source ) \
do { \
LEON_REG.Interrupt_Clear = (1 << (_source)); \
} while (0)
#define LEON_Force_interrupt( _source ) \
do { \
LEON_REG.Interrupt_Force = (1 << (_source)); \
} while (0)
#define LEON_Is_interrupt_pending( _source ) \
(LEON_REG.Interrupt_Pending & (1 << (_source)))
#define LEON_Is_interrupt_masked( _source ) \
(LEON_REG.Interrupt_Masked & (1 << (_source)))
#define LEON_Mask_interrupt( _source ) \
do { \
unsigned32 _level; \
\
_level = sparc_disable_interrupts(); \
LEON_REG.Interrupt_Mask &= ~(1 << (_source)); \
sparc_enable_interrupts( _level ); \
} while (0)
#define LEON_Unmask_interrupt( _source ) \
do { \
unsigned32 _level; \
\
_level = sparc_disable_interrupts(); \
LEON_REG.Interrupt_Mask |= (1 << (_source)); \
sparc_enable_interrupts( _level ); \
} while (0)
#define LEON_Disable_interrupt( _source, _previous ) \
do { \
unsigned32 _level; \
unsigned32 _mask = 1 << (_source); \
\
_level = sparc_disable_interrupts(); \
(_previous) = LEON_REG.Interrupt_Mask; \
LEON_REG.Interrupt_Mask = _previous & ~_mask; \
sparc_enable_interrupts( _level ); \
(_previous) &= _mask; \
} while (0)
#define LEON_Restore_interrupt( _source, _previous ) \
do { \
unsigned32 _level; \
unsigned32 _mask = 1 << (_source); \
\
_level = sparc_disable_interrupts(); \
LEON_REG.Interrupt_Mask = \
(LEON_REG.Interrupt_Mask & ~_mask) | (_previous); \
sparc_enable_interrupts( _level ); \
} while (0)
/*
* Each timer control register is organized as follows:
*
* D0 - Enable
* 1 = enable counting
* 0 = hold scaler and counter
*
* D1 - Counter Reload
* 1 = reload counter at zero and restart
* 0 = stop counter at zero
*
* D2 - Counter Load
* 1 = load counter with preset value
* 0 = no function
*
*/
#define LEON_REG_TIMER_COUNTER_RELOAD_AT_ZERO 0x00000002
#define LEON_REG_TIMER_COUNTER_STOP_AT_ZERO 0x00000000
#define LEON_REG_TIMER_COUNTER_LOAD_COUNTER 0x00000004
#define LEON_REG_TIMER_COUNTER_ENABLE_COUNTING 0x00000001
#define LEON_REG_TIMER_COUNTER_DISABLE_COUNTING 0x00000000
#define LEON_REG_TIMER_COUNTER_RELOAD_MASK 0x00000002
#define LEON_REG_TIMER_COUNTER_ENABLE_MASK 0x00000001
#define LEON_REG_TIMER_COUNTER_DEFINED_MASK 0x00000003
#define LEON_REG_TIMER_COUNTER_CURRENT_MODE_MASK 0x00000003
#endif /* !ASM */
#ifdef __cplusplus
}
#endif
#endif /* !_INCLUDE_LEON_h */
/* end of include file */
|
