2009-02-11 Joel Sherrill <joel.sherrill@oarcorp.com>
* tod.c: Use rtems_clock_get_tod().
2009-01-05 Ralf Corsépius <ralf.corsepius@rtems.org>
* src/irq-generic.c: #include <stdlib.h>.
2008-12-19 Sebastian Huber <sebastian.huber@embedded-brains.de>
* include/irq-info.h, src/irq-info.c, src/irq-shell.c: New files.
* include/irq-generic.h, src/irq-generic.c: Improved interrupt handler
dispatch function.
2008-12-15 Joel Sherrill <joel.sherrill@oarcorp.com>
* bootcard.c: Eliminate pointers to API configuration tables in the
main configuration table. Reference the main configuration table and
the API configuration tables directly using the confdefs.h version
rather than obtaining a pointer to it. This eliminated some
variables, a potential fatal error, some unnecessary default
configuration structures. Overall, about a 4.5% reduction in the code
size for minimum and hello on the SPARC.
2008-12-11 Ralf Corsepius <ralf.corsepius@rtems.org>
* clock_driver_stub.c: Remove (unused).
2008-10-13 Joel Sherrill <joel.sherrill@oarcorp.com>
* clock_driver_simidle.c: Ensure ISR nest level and Thread Dispatch
disable level are in the same state they would be in a true ISR. This
ensures that all of the clock tick handling is as similar as possible
in this limited environment.
2008-10-02 Joel Sherrill <joel.sherrill@OARcorp.com>
* include/tm27.h: Use shared tm27.h stub.
2008-10-02 Joel Sherrill <joel.sherrill@oarcorp.com>
* bootcard.c, bspgetworkarea.c, bsppretaskinghook.c,
include/bootcard.h: Change size_t to ssize_t on bsp_get_work_area().
On 16-bit architectures, size_t can be 16-bits which would limit the
work area to 64K.
2008-09-30 Sebastian Huber <sebastian.huber@embedded-brains.de>
* include/utility.h: Renamed various macros.
2008-09-30 Ralf Corsepius <ralf.corsepius@rtems.org>
* clockdrv_shell.c: Empty file. Add warning to not use this file.
* clock_driver_simidle.c: include clockdrv_shell.h.
2008-09-30 Ralf Corsepius <ralf.corsepius@rtems.org>
* clockdrv_shell.h: New (Copied from clockdrv_shell.c).
2008-09-24 Joel Sherrill <joel.sherrill@oarcorp.com>
* clock_driver_simidle.c: New file.
This implementation is for BSPs for simulators without a clock tick
ISR. It provides a special IDLE task that calls rtems_clock_tick()
repeatedly when the application ends up in the IDLE task. This
simulates time advancing. It is enough to run many tests but
will not result in the correct behavior when you want timeslicing.
This is because timeslicing assumes that a tick ISR determines
that the currently executing thread must be switched out. Without
a clock tick ISR, this will not occur.
2008-09-23 Joel Sherrill <joel.sherrill@oarcorp.com>
* bootcard.c, include/bootcard.h: Make letting boot_card() handle work
area allocation mandatory. Rename
RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION to BSP_BOOTCARD_OPTIONS.
2008-09-23 Sebastian Huber <sebastian.huber@embedded-brains.de>
* include/utility.h: New file.
2008-09-22 Joel Sherrill <joel.sherrill@oarcorp.com>
* bspclean.c, include/bootcard.h: Use standardized bsp_cleanup() which
can optionally print a message, poll for user to press key, and call
bsp_reset(). Using this eliminates the various bsp_cleanup()
implementations which had their own implementation and variety of
string constants.
* bspreset.c, bspreset_fatal.c, bspreset_loop.c: New files.
2008-09-22 Sebastian Huber <sebastian.huber@embedded-brains.de>
* clockdrv_shell.c: Install_clock has now static linkage. Initialize
rtems_clock_major with unsigned integer literal.
2008-09-21 Joel Sherrill <joel.sherrill@oarcorp.com>
* bspgetworkarea.c: Fix typo. Add debug printk statements.
2008-09-20 Joel Sherrill <joel.sherrill@oarcorp.com>
* bspgetworkarea.c: Augment to optionally know U-Boot.
2008-09-18 Joel Sherrill <joel.sherrill@oarcorp.com>
* bootcard.c: Perform bsp_start() before bsp_get_work_area().
2008-09-17 Joel Sherrill <joel.sherrill@oarcorp.com>
* bootcard.c: Add support for optionally having a unified work area. In
other words, the RTEMS Workspace and C Program Heap are the same pool
of memory.
2008-09-17 Miao Yan <yanmiaobest@gmail.com>
* bsplibc.c, bsppost.c: Merge GSOC project code to add simple device
only filesystem (devfs), optionally completely drop out filesystem,
and to clean up disabling newlib reentrancy support. This dropped 17K
from the minimum.exe for sparc/sis and arm/rtl22xx_t now has a 15K
code space.
2008-09-16 Joel Sherrill <joel.sherrill@oarcorp.com>
* bspgetworkarea.c: New file. This implementation should be useable
by most BSPs if they provide the proper support in their linker script.
2008-09-16 Joel Sherrill <joel.sherrill@oarcorp.com>
* clockdrv_shell.c: Remove unnecessary includes of rtems/libcsupport.h
and rtems/libio.h.
* bspstart.c: New file.
2008-09-05 Joel Sherrill <joel.sherrill@OARcorp.com>
* clockdrv_shell.c: The Shared Memory Driver no longer requires the
special IOCTL in Clock_control. This was a hack which has existed
since before the Classic API Timer Manager was implemented. All
implementations of and references to Clock_control were removed.
2008-09-05 Ralf Corsépius <ralf.corsepius@rtems.org>
* timerstub.c, tod.c: Convert to "bool".
2008-09-03 Joel Sherrill <joel.sherrill@OARcorp.com>
* tod.c: Remove extern. RTC_Present is not defined anywhere.
2008-09-02 Ralf Corsépius <ralf.corsepius@rtems.org>
PR 1302/bsps
* vmeUniverse/vmeUniverse.h: Remove
_VME_UNIVERSE_DECLARE_SHOW_ROUTINES.
2008-08-31 Joel Sherrill <joel.sherrill@oarcorp.com>
* timerstub.c: Eliminate empty function from every benchmark timer
driver. Fix spelling.
2008-08-30 Joel Sherrill <joel.sherrill@oarcorp.com>
* bootcard.c: Fix formatting.
* console-polled.c: Error if minor < 2 not just <= 2.
2008-08-28 Till Straumann <strauman@slac.stanford.edu>
* vmeUniverse/vmeTsi148.h, vmeUniverse/vmeTsi148.c:
added vmeTsi148ResetBusXX(), vmeTsi148ResetBus().
2008-08-28 Till Straumann <strauman@slac.stanford.edu>
* vmeUniverse/VME.h: added BSP_VMEResetBus().
2008-08-20 Sebastian Huber <sebastian.huber@embedded-brains.de>
* src/irq-generic.c: Fixed integer conversion warnings.
2008-08-19 Ralf Corsépius <ralf.corsepius@rtems.org>
* timerstub.c: Add missing prototypes.
2008-08-15 Allan Hessenflow <allanh@kallisti.com>
* src/lib/libbsp/mips/jmr3904/tools/runtest: Add bf537Stamp.
2008-08-19 Sebastian Huber <sebastian.huber@embedded-brains.de>
* include/bootcard.h, bootcard.c, bsplibc.c: Changed parameter types of
bsp_libc_init() to match RTEMS_Malloc_Initialize().
* bsppost.c, bsppredriverhook.c: Include bootcard.h.
* src/irq-generic.c: Fixed warnings.
2008-08-18 Joel Sherrill <joel.sherrill@oarcorp.com>
* bsppost.c: Fix warning by moving prototype to libcsupport.h.
2008-08-18 Ralf Corsépius <ralf.corsepius@rtems.org>
* tod.c: Add missing prototypes.
2008-08-05 Joel Sherrill <joel.sherrill@OARcorp.com>
PR 537/bsps
* bsplibc.c: Eliminate vestiges of ticks_per_timeslice controlling
newlib reentrancy. The parameter was ignored in libc_init().
2008-07-28 Sebastian Huber <sebastian.huber@embedded-brains.de>
* src/irq-legacy.c: Free allocated memory in handler remove.
* bootcard.c: Check if the heap fits into the work area.
2008-07-24 Sebastian Huber <sebastian.huber@embedded-brains.de>
* include/bootcard.h: New file.
* bootcard.c: Changed bsp_get_workarea() to bsp_get_work_area() and
added support for an optional separate heap area.
* bsppretaskinghook.c: Cleanup. Include bootcard.h.
* include/irq-generic.h, src/irq-generic.c, src/irq-legacy.c: Support
for new rtems_interrupt_handler_iterate() function.
2008-07-15 Joel Sherrill <joel.sherrill@oarcorp.com>
* bootcard.c: Must include bsp.h or bspopts.h or we cannot know if
boot_card() handles RAM allocation.
2008-07-14 Sebastian Huber <sebastian.huber@embedded-brains.de>
* bootcard.c: Removed duplicated code.
2008-07-10 Sebastian Huber <sebastian.huber@embedded-brains.de>
* bootcard.c: Special case for PowerPC: The interrupt disable
mask is stored in SPRG0. It must be valid before we can use
rtems_interrupt_disable().
2008-07-09 Sebastian Huber <sebastian.huber@embedded-brains.de>
* include/irq-config.h, include/irq-generic.h,
src/irq-generic.c, src/irq-legacy.c: Generic BSP interrupt handler
support.
2008-06-04 Joel Sherrill <joel.sherrill@OARcorp.com>
* include/tm27.h: New file. Stub version of tm27 support.
2008-05-23 Till Straumann <strauman@slac.stanford.edu>
* vmeUniverse/VME.h: removed 'weak' attribute from
declaration of BSP_vme_config().
2008-05-22 Till Straumann <strauman@slac.stanford.edu>
* vmeUniverse/vmeUniverse.c: fixed compiler warning;
moved struct attributes as directed by gcc warning.
2008-05-15 Joel Sherrill <joel.sherrill@OARcorp.com>
* bootcard.c: Add capability for bootcard.c BSP Initialization
Framework to ask the BSP where it has memory for the RTEMS Workspace
and C Program Heap. These collectively are referred to as work area.
If the BSP supports this, then it does not have to include code to
split the available memory between the two areas. This reduces the
amount of code in the BSP specific bspstart.c file. Additionally, the
shared framework can initialize the C Library, call
rtems_debug_enable(), and dirty the work area memory. Until most/all
BSPs support this new capability, if the BSP supports this, it should
call RTEMS_BSP_BOOTCARD_HANDLES_RAM_ALLOCATION from its configure.ac.
When the transition is complete, this autoconf macro can be removed.
* bsppretaskinghook.c: New file.
2008-05-12 Joel Sherrill <joel.sherrill@OARcorp.com>
* bootcard.c: Refactored and renamed initialization routines to
rtems_initialize_data_structures, rtems_initialize_before_drivers,
rtems_initialize_device_drivers, and
rtems_initialize_start_multitasking. This opened the sequence up so
that bootcard() could provide a more robust and flexible framework
which is easier to explain and understand. This also lays the
groundwork for sharing the division of available memory between the
RTEMS workspace and heap and the C library initialization across all
BSPs.
2008-05-06 Joel Sherrill <joel.sherrill@OARcorp.com>
* bootcard.c: Improve formatting and comments.
2008-03-20 Till Straumann <strauman@slac.stanford.edu>
* vmeUniverse/vmeTsi148.c: type of 5th argument
to pci_read_config_dword() is now uint32_t*.
2008-03-17 Till Straumann <strauman@slac.stanford.edu>
* vmeUniverse/vmeTsi148.c: Initialize VME Master
'VTON' timer and bus-release policy to less aggressive
values than the chip's defaults. The default VTON easily
overrides any settings used by the DMA engine.
2008-03-03 Joel Sherrill <joel.sherrill@OARcorp.com>
* gdbstub/rtems-stub-glue.c: Update to use the new
rtems_object_get_name() service. This simplified the code a bit.
2008-01-22 Joel Sherrill <joel.sherrill@OARcorp.com>
* bootcard.c: Improve comments and clean up argc/argv order.
2007-12-11 Joel Sherrill <joel.sherrill@OARcorp.com>
* bootcard.c, bsplibc.c: Eliminate copies of the Configuration Table.
Use the RTEMS provided accessor macros to obtain configuration
fields.
2007-12-04 Joel Sherrill <joel.sherrill@OARcorp.com>
* bootcard.c: Move interrupt_stack_size field from CPU Table to
Configuration Table. Eliminate CPU Table from all ports. Delete
references to CPU Table in all forms.
2007-12-03 Joel Sherrill <joel.sherrill@OARcorp.com>
* bsppredriverhook.c: New file.
2007-12-03 Joel Sherrill <joel.sherrill@OARcorp.com>
* bootcard.c: Moved most of the remaining CPU Table fields to the
Configuration Table. This included pretasking_hook, predriver_hook,
postdriver_hook, idle_task, do_zero_of_workspace,
extra_mpci_receive_server_stack, stack_allocate_hook, and
stack_free_hook. As a side-effect of this effort some multiprocessing
code was made conditional and some style clean up occurred.
2007-12-02 Till Straumann <strauman@slac.stanford.edu>
* vmeUniverse/vmeUniverse.c, vmeUniverse/vmeTsi148.c:
silenced compiler warnings caused by type changes
in byteorder.h (volatile unsigned * -> volatile uint32_t *)
2007-11-26 Joel Sherrill <joel.sherrill@oarcorp.com>
* bootcard.c: Add comment.
2007-07-15 Till Straumann <strauman@slac.stanford.edu>
* vmeUniverse/vmeTsi148.c: Use size_t for sizes.
2007-06-20 Joel Sherrill <joel.sherrill@OARcorp.com>
* bsppost.c: Split open of the console from the standard BSP code so it
is easier to stub out.
2007-05-10 Till Straumann <strauman@slac.stanford.edu>
* vmeUniverse/vmeUniverse.c: Changed types to silence
compiler warnings.
2007-05-09 Joel Sherrill <joel.sherrill@OARcorp.com>
* bootcard.c: Move __fini call to inside executive for
symmettry with __init call.
2007-04-17 Joel Sherrill <joel@OARcorp.com>
* bootcard.c: RTEMS Workspace now defaults to not being zeroed. This
significantly speeds up boot time on targets not requiring memory to
be touched at boot time.
2007-04-02 Joel Sherrill <joel@OARcorp.com>
* dummy_printk_support.c: New file.
2007-03-31 Ralf Corsépius <ralf.corsepius@rtems.org>
* vmeUniverse/vmeUniverse.c: Use uint32_t for pci_ulong.
2007-03-28 Joel Sherrill <joel@OARcorp.com>
* clockdrv_shell.c: Add support to the Clock driver template for
rtems_clock_set_nanoseconds_extension and the potential for TOD and
timestamps accurate to the nanosecond.
2007-03-28 Joel Sherrill <joel@OARcorp.com>
PR 1232/bsps
* bsppost.c: It should not be a fatal error to not have a console.
2007-03-09 Joel Sherrill <joel@OARcorp.com>
* bootcard.c: Change XXX to real comment.
2007-02-06 Ralf Corsépius <ralf.corsepius@rtems.org>
* vmeUniverse/vmeUniverse.c: Use size_t for sizes.
2007-01-30 Till Straumann <strauman@slac.stanford.edu>
* vmeUniverse/README.porting, vmeUniverse/README.universe:
updated, added more information for BSP implementors.
* vmeUniverse/VMEDMA.h (added): VME DMA API definition.
* vmeUniverse/bspVmeDmaList.h (added), vmeUniverse/bspVmeDmaListP.h (added),
* vmeUniverse/bspVmeDmaList.c (added):
Driver-independent code for linked-list DMA (public + private headers,
implementation).
* vmeUniverse/vmeUniverseDMA.h (added), vmeUniverse/vmeTsi148DMA.h (added):
interface to new DMA features of drivers.
* vmeUniverse/vme_amd_defs.h: Added definition for data-width
hint bits (VME_MODE_DBWxx).
* vmeUniverse/vmeTsi148.c: added DMA support. Added support for
data-width hint/modifier bits.
* vmeUniverse/vmeUniverse.c, vmeUniverse/vmeUniverse.h:
Added support for data-width hint/modifier bits.
Added support for xxx_BLT, xxx_MBLT address modifiers.
Restrict DBW to 32 in non-MBLT modes (except single-beat;
a comment is in README.universe). Updated DMA support to
implement new VMEDMA.h API. Added support for non-incrementing
VME addresses. Restrict data width to 32 for single-beat AMs
when the universe would use MBLT for DMA.
2007-01-19 Till Straumann <strauman@slac.stanford.edu>
* vmeUniverse/VME.h:
moved VME.h from libbsp/powerpc/shared/vme to
libbsp/shared/vmeUniverse; eventually, this (and other)
VME API headers should migrate to cpukit.
2007-01-16 Till Straumann <strauman@slac.stanford.edu>
* vmeUniverse/vmeTsi148.c, vmeUniverse/vmeTsi148.h,
vmeUniverse/vmeUniverse.c, vmeUniverse/vmeUniverse.h,
vmeUniverse/vme_am_defs.h:
Added SLAC/Stanford Authorship Note / Copyright + Liability Disclaimer.
2006-12-13 Till Straumann <strauman@slac.stanford.edu>
* vmeUniverse/vme_am_defs.h: Added address modifiers for 2eVME.
Added flags for 2eSST and DBW16.
* vmeUniverse/vmeUniverse.h: Removed AM definitions and include
vme_am_defs.h instead. Declare new routine vmeUniverseMapCRG().
Export 'irq manager' API only if __INSIDE_RTEMS_BSP__ defined. Renamed
'shared' argument to vmeUniverseInstallIrqMgrAlt() to 'flags' since
now more options are available. Added new flag to install
'posted-write' workaround.
* vmeUniverse/vmeUniverse.c: Allow BSP to override BSP_PCI2LOCAL_ADDR()
macro. Data width of outbound port can now be restricted to 16-bit
(if new DBW16 flag set in address modifier). Added vmeUniverseMapCRG()
for mapping local registers onto VME. Interrupt manager now implements
a workaround (enabled at installation time) which flushes the
write-fifo after user ISR returns. This requires the universe's
registers to be accessible from VME (either CSR space or CRG mapped
to A16/A24/A32), though.
* vmeUniverse/vmeTsi148.h: vmeTsi148ClearVMEBusErrors() now returns
the fault address as a 32-bit address (not ulonglong anymore). The
driver only supports 32-bit addresses. Declare new routine
vmeTsi148MapCRG(). Export 'irq manager' API only if
__INSIDE_RTEMS_BSP__ defined. Renamed 'shared' argument to
vmeTsi148InstallIrqMgrAlt() to 'flags' to allow more options to be
supported. Added comments explaining the 'posted-write' workaround
implemented by the interrupt manager.
* vmeUniverse/vmeTsi148.c: Clear 'SYSFAIL' during initialization.
Allow BSP to override BSP_PCI2LOCAL_ADDR() macro. Added support for
2eSST when configuring windows (untested - I have no 2eSST).
Added vmeTsi148MapCRG() for mapping local registers onto VME.
Implemented 'posted-write' workaround for interrupt manager
(consult source for details).
2006-12-13 Joel Sherrill <joel@OARcorp.com>
PR 1190/bsps
* bootcard.c: Remove status since unused.
2006-11-29 Till Straumann <strauman@slac.stanford.edu>
* vmeUniverse/vmeTsi148.h: user now must define a symbol
for the header to declare 'dump info'-style routine. This
is in order to avoid pulling in <stdio.h>.
2006-11-17 Joel Sherrill <joel@OARcorp.com>
* clock_driver_stub.c, clockdrv_shell.c: Use common clock driver
template and eliminate all fast idle code specific to this BSP. This
eliminates a fair amount of code in the BSP clock driver and
bsp_startup. The LEON3 has to do a scan of the AMBA bus to find the
timer so I added the new hook Clock_driver_support_find_timer to
support this. In general, there was some clean up to the file headers
of various files.
2006-11-15 Joel Sherrill <joel@OARcorp.com>
* bootcard.c: Merge c_rtems_main() into boot_card(). This eliminated a
file and simplified initialization.
* main.c: Removed.
2006-10-19 Joel Sherrill <joel@OARcorp.com>
* gdbstub/rtems-stub-glue.c: Change registers pointer to unsigned.
2006-07-12 Till Straumann <strauman@slac.stanford.edu>
* vmeUniverse/vmeTsi148.c: Silenced compiler warnings
(gcc-4.1.1 warns that uint32_t and unsigned int are different).
2006-06-19 Till Straumann <strauman@slac.stanford.edu>
* vmeUniverse/vme_amd_defs.h: Added address-modifier
codes for BLT/MBLT.
2006-02-01 Joel Sherrill <joel.sherrill@oarcorp.com>
* gnatinstallhandler.c: Rename since old name is now used
by GNAT source.
2006-01-26 Till Straumann <strauman@slac.stanford.edu>
* vmeUniverse/vmeTsi148.c, vmeUniverse/vmeUniverse.c,
vmeUniverse/vmeUniverse.h, vmeUniverse/vme_amd_defs.h:
Added 2F address modifier for VME64 CSR access.
2006-01-11 Till Straumann <strauman@slac.stanford.edu>
* vmeUniverse/vmeTsi148.c, vmeUniverse/vmeTsi148.h,
vmeUniverse/vmeUniverse.c, vmeUniverse/vmeUniverse.h,
vmeUniverse/vme_amd_defs.h: No longer enable posted-writes
on master windows (creates race-condition on memory-mapped
devices). A new flag allows for signalling that a window
maps 'ordinary memory'. Disable VME IRQ level if no
handler is registered with interrupting vector.
2006-01-11 Till Straumann <strauman@slac.stanford.edu>
* vmeUniverse/vmeTsi148.c, vmeUniverse/vmeTsi148.h:
Eliminate obsolete types.
2005-11-09 Ralf Corsepius <ralf.corsepius@rtems.org>
* vmeUniverse/vmeUniverse.c: Eliminate obsolete types.
Remove CVS log.
2005-10-20 Eric Norum <norume@aps.anl.gov>
* vmeUniverse/vmeUniverse.c: Support MVME2100.
2005-09-02 Joel Sherrill <joel@OARcorp.com>
PR 577/bsps
* console.c: Make the previously committed patch for this PR compile.
2005-08-19 Cedric Aubert <cedric_aubert@yahoo.fr>
PR 577/bsps
* console.c: The console_close() method currently calls StopRemoteTx()
on all invocations. It should should be ok for last close only but
not for any others. If you open a port multiple times, you only want
to call StopRemoteTx() only as part of the last close.
2005-04-15 Jennifer Averett <jennifer.averett@oarcorp.com>
PR 779/bsp
* vmeUniverse/vmeUniverse.c: add parameter to new exception interrupt
handlers in powerpc bsps
2005-03-14 Joel Sherrill <joel@OARcorp.com>
* vmeUniverse/README.porting, vmeUniverse/vmeUniverse.c: Continue PCI
API unification. All use pci_find_device().
2005-01-23 Joel Sherrill <joel@OARcorp.com>
* tod.c: Change type of RTC_Count to size_t.
2004-12-10 Ralf Corsepius <ralf.corsepius@rtems.org>
PR 704/bsps.
* ide_ctrl.c: Removed (obsolete).
2004-11-20 Thomas Doerfler <Thomas.Doerfler@imd-systems.de>
PR 703/filesystem
* ide_ctrl.c: Extend the "modes_available" and "mode_active"
parameters to uint16_t for UDMA support.
2004-11-16 Richard Campbell <richard.campbell@OARcorp.com>
* vmeUniverse/vmeUniverse.c: Use PCI_MEM_BASE_ADJUSTMENT because some
boards -- notably the MVME2100 -- return the physical address, not an
offset in PCI memory space.
2004-10-13 Eric Norum <norume@aps.anl.gov>
PR 688/bsps
* shared/tod.c: Set RTEMS time during TOD initialization
2004-04-01 Ralf Corsepius <ralf_corsepius@rtems.org>
* ide_ctrl.c: Include <rtems/chain.h> instead of <chain.h>.
2004-03-31 Ralf Corsepius <ralf_corsepius@rtems.org>
* bsplibc.c, clockdrv_shell.c, ide_ctrl.c, tod.c,
gdbstub/rtems-stub-glue.c: Convert to using c99 fixed size types.
2004-01-23 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* ChangeLog: Merge-in gdbstub/ChangeLog.
* gdbstub/ChangeLog: Remove.
2003-09-26 Cedric Aubert <cedric_aubert@yahoo.fr>
PR 501/rtems_misc
* console.c: console_open disables ICANON on non-console port, which
should be ok for the first open but not for subsequent ones. If you open
one serial port, you will configure it, when you reopen it you will lost
the ICANON parameters if you had put it. Should be done by console only
at first open.
2003-09-04 Joel Sherrill <joel@OARcorp.com>
* bootcard.c, bspclean.c, clockdrv_shell.c, console-polled.c, console.c,
ide_ctrl.c, main.c, sbrk.c, setvec.c, tod.c, tod.h, include/coverhd.h:
URL for license changed.
2003-08-16 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* Makefile.am: Reflect having moved automake/.
2003-08-08 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* include/Makefile.am: Remove (merged into Makefile.am).
* gdbstub/Makefile.am: Remove (merged into Makefile.am).
* Makefile.am: Reflect changes above. Reflect having merged
../configure.ac into ../../../configure.ac.
2003-06-30 Joel Sherrill <joel@OARcorp.com>
* console-polled.c: Corrected comments in header.
2003-04-10 Till Straumann <strauman@slac.stanford.edu>
PR 380/bsps
* vmeUniverse/vmeUniverse.c, vmeUniverse/vmeUniverse.h: make printk
format strings compliant with libcpu/printk. minor fixes and lazy init
bugfix.
2003-03-11 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* vmeUniverse/vmeUniverse.c: Remove CVS-Log (skrews up on CVS-mergers).
2003-02-20 Till Straumann <strauman@slac.stanford.edu>
PR 349/bsps
* README.universe, vmeUniverse/README.porting
vmeUniverse/README.universe, vmeUniverse/vmeUniverse.c,
vmeUniverse/vmeUniverse.h: Update of the VME universe driver.
* vmeUniverse/README.porting: New file.
2002-10-28 Eugeny S. Mints <Eugeny.Mints@oktet.ru>
* ide_ctrl.c: New file.
2002-07-01 Joel Sherrill <joel@OARcorp.com>
* gdbstub/rtems-stub-glue.c: Corrected use of _Objects_Information_table
now that it is a two dimensional array based upon API and class.
2002-06-25 Joel Sherrill <joel@OARcorp.com>
* Thomas Doerfler <Thomas.Doerfler@imd-systems.de> added m68k support to
the shared gdb stub glue necessitating a move up.
* Makefile.am: Reflect new gdbstub directory.
* Thomas Doerfler <Thomas.Doerfler@imd-systems.de> added m68k support to
the shared gdb stub glue necessitating a move up.
* gdbstub/ChangeLog, gdbstub/Makefile.am, gdbstub/.cvsignore: New file.
* gdbstub/rtems-stub-glue.c: Moved from mips/shared/gdbstub and
m68k/shared/gdbstub.
2002-03-27 Ralf Corsepius <corsepiu@faw.uni-ulm.de>
* include/Makefile.am: Remove AUTOMAKE_OPTIONS.
* Makefile.am: Remove AUTOMAKE_OPTIONS.
2001-10-22 Joel Sherrill <joel@OARcorp.com>
* bootcard.c: Use __USE_INIT_FINI__ since USE_INIT_FINI pollutes the
application namespace.
2001-10-17 Joel Sherrill <joel@OARcorp.com>
* timerstub.c: New stub file for BSPs that don't have timer hardware.
2001-10-12 Joel Sherrill <joel@OARcorp.com>
* console-polled.c, console.c: Fixed typo.
2001-05-14 Till Straumann <strauman@slac.stanford.edu>
* vmeUniverse/README.universe, vmeUniverse/vmeUniverse.c,
vmeUniverse/vmeUniverse.h: New files.
* Makefile.am: Modified to reflect addition of files.
* Per PR214, contributes a driver for the TUNDRA UNIVERSE VME-PCI bridge
to libbsp/shared. NOTE: This driver is maintained _outside_ RTEMS by
Till. Please forward future modifications to him.
2001-01-12 Joel Sherrill <joel@OARcorp.com>
* setvec.c: Removed unused variables.
2001-01-09 Joel Sherrill <joel@OARcorp.com>
* clockdrv_shell.c (CLOCK_DRIVER_ISRS_PER_TICK): Add support for
multiple ISRs per clock tick. Testing per hacking on mips/jmr3904 clock
driver.
2001-01-03 Joel Sherrill <joel@OARcorp.com>
* clockdrv_shell.c: Fixed syntax error in fast idle support.
* clockdrv_shell.c: Added fast idle mode which is enabled by defining
CLOCK_DRIVER_USE_FAST_IDLE.
* console-polled.c: Added console_initialize_hardware() hook.
2000-12-01 Joel Sherrill <joel@OARcorp.com>
* console-polled.c: Remove warnings.
2000-11-13 Joel Sherrill <joel@OARcorp.com>
* clock_driver_stub.c: This is a stub of a clock driver that is
sufficient for linking the ticker application. Some simulators do not
have a soruce for a clock tick. Also this can be used while
constructing a BSP so everything links.
2000-11-01 Joel Sherrill <joel@OARcorp.com>
* bsplibc.c: assoc.h, error.h, libio_.h, libio.h, and libcsupport.h
moved from libc to lib/include/rtems and now must be referenced as
<rtems/XXX.h>. Header file order was cleaned up while doing this.
2000-10-30 Joel Sherrill <joel@OARcorp.com>
* POSIX include files merged into newlib. This resulted in some
definitions moving to other files and thus some secondary effects in
RTEMS source code.
* sbrk.c: Corrected prototype to match newlib.
2000-08-10 Joel Sherrill <joel@OARcorp.com>
* ChangeLog: New file.
