/*
* $Id$
*/
#include <libcpu/io.h>
#include <libcpu/spr.h>
#include <bsp.h>
#include <bsp/pci.h>
#include <bsp/consoleIo.h>
#include <bsp/residual.h>
#include <bsp/openpic.h>
#include <rtems/bspIo.h>
#define RAVEN_MPIC_IOSPACE_ENABLE 0x1
#define RAVEN_MPIC_MEMSPACE_ENABLE 0x2
#define RAVEN_MASTER_ENABLE 0x4
#define RAVEN_PARITY_CHECK_ENABLE 0x40
#define RAVEN_SYSTEM_ERROR_ENABLE 0x100
#define RAVEN_CLEAR_EVENTS_MASK 0xf9000000
#define RAVEN_MPIC_MEREN ((volatile unsigned *)0xfeff0020)
#define RAVEN_MPIC_MERST ((volatile unsigned *)0xfeff0024)
/* enable machine check on all conditions */
#define MEREN_VAL 0x2f00
#define pci BSP_pci_configuration
extern const pci_config_access_functions pci_direct_functions;
extern const pci_config_access_functions pci_indirect_functions;
unsigned long
_BSP_clear_hostbridge_errors(int enableMCP, int quiet)
{
unsigned merst;
merst = in_be32(RAVEN_MPIC_MERST);
/* write back value to clear status */
out_be32(RAVEN_MPIC_MERST, merst);
if (enableMCP) {
if (!quiet)
printk("Enabling MCP generation on hostbridge errors\n");
out_be32(RAVEN_MPIC_MEREN, MEREN_VAL);
} else {
out_be32(RAVEN_MPIC_MEREN, 0);
if ( !quiet && enableMCP ) {
printk("leaving MCP interrupt disabled\n");
}
}
return (merst & 0xffff);
}
void detect_host_bridge()
{
PPC_DEVICE *hostbridge;
unsigned int id0;
unsigned int tmp;
/*
* This code assumes that the host bridge is located at
* bus 0, dev 0, func 0 AND that the old pre PCI 2.1
* standart devices detection mecahnism that was used on PC
* (still used in BSD source code) works.
*/
hostbridge=residual_find_device(&residualCopy, PROCESSORDEVICE, NULL,
BridgeController,
PCIBridge, -1, 0);
if (hostbridge) {
if (hostbridge->DeviceId.Interface==PCIBridgeIndirect) {
pci.pci_functions=&pci_indirect_functions;
/* Should be extracted from residual data,
* indeed MPC106 in CHRP mode is different,
* but we should not use residual data in
* this case anyway.
*/
pci.pci_config_addr = ((volatile unsigned char *)
(ptr_mem_map->io_base+0xcf8));
pci.pci_config_data = ptr_mem_map->io_base+0xcfc;
} else if(hostbridge->DeviceId.Interface==PCIBridgeDirect) {
pci.pci_functions=&pci_direct_functions;
pci.pci_config_data=(unsigned char *) 0x80800000;
} else {
}
} else {
/* Let us try by experimentation at our own risk! */
pci.pci_functions = &pci_direct_functions;
/* On all direct bridges I know the host bridge itself
* appears as device 0 function 0.
*/
pci_read_config_dword(0, 0, 0, PCI_VENDOR_ID, &id0);
if (id0==~0U) {
pci.pci_functions = &pci_indirect_functions;
pci.pci_config_addr = ((volatile unsigned char*)
(ptr_mem_map->io_base+0xcf8));
pci.pci_config_data = ((volatile unsigned char*)ptr_mem_map->io_base+0xcfc);
}
/* Here we should check that the host bridge is actually
* present, but if it not, we are in such a desperate
* situation, that we probably can't even tell it.
*/
}
pci_read_config_dword(0, 0, 0, 0, &id0);
if(id0 == PCI_VENDOR_ID_MOTOROLA +
(PCI_DEVICE_ID_MOTOROLA_RAVEN<<16)) {
/*
* We have a Raven bridge. We will get information about its settings
*/
pci_read_config_dword(0, 0, 0, PCI_COMMAND, &id0);
#ifdef SHOW_RAVEN_SETTING
printk("RAVEN PCI command register = %x\n",id0);
#endif
id0 |= RAVEN_CLEAR_EVENTS_MASK;
pci_write_config_dword(0, 0, 0, PCI_COMMAND, id0);
pci_read_config_dword(0, 0, 0, PCI_COMMAND, &id0);
#ifdef SHOW_RAVEN_SETTING
printk("After error clearing RAVEN PCI command register = %x\n",id0);
#endif
if (id0 & RAVEN_MPIC_IOSPACE_ENABLE) {
pci_read_config_dword(0, 0, 0,PCI_BASE_ADDRESS_0, &tmp);
#ifdef SHOW_RAVEN_SETTING
printk("Raven MPIC is accessed via IO Space Access at address : %x\n",(tmp & ~0x1));
#endif
}
if (id0 & RAVEN_MPIC_MEMSPACE_ENABLE) {
pci_read_config_dword(0, 0, 0,PCI_BASE_ADDRESS_1, &tmp);
#ifdef SHOW_RAVEN_SETTING
printk("Raven MPIC is accessed via memory Space Access at address : %x\n", tmp);
#endif
OpenPIC=(volatile struct OpenPIC *) (tmp + PREP_ISA_MEM_BASE);
printk("OpenPIC found at %x.\n",
OpenPIC);
}
}
if (OpenPIC == (volatile struct OpenPIC *)0) {
BSP_panic("OpenPic Not found\n");
}
}
