#ifndef BSP_FLASH_PGM_API_H
#define BSP_FLASH_PGM_API_H
/* Trivial Flash Programmer */
/* Author: Till Straumann <strauman@slac.stanford.edu>, 2006
* NOTE: copyright info at the bottom of this file
*/
/* IMPORTANT NOTE
*
* The flash API is NOT THREAD SAFE. During the execution of any of the
* BSP_flashXXX() routines, flash (residing in the same device)
* MUST NOT be accessed by other threads in ANY way (NOT EVEN READ!).
* Read operations may return internal device register contents
* instead of memory array data when issued while a flash device
* is erased, written or queried by the library.
*
* The routines are intended for occasional maintenance use only
* (i.e., not for implementing a file system or similar).
*
* While polling for the completion of block erase operations the
* CPU is yielded to other threads. Busy waiting (interrupts and
* thread dispatching remain enabled) on write operations is employed.
*/
#include <stdio.h>
#ifdef __cplusplus
extern "C" {
#endif
/* Disengage flash write protection. Write protection is implemented
* at the board or chipset level by disabling all write operations/bus cycles
* to the flash device(s).
* With write protection enabled, nothing but 'ordinary' (array) read operations
* are possible.
* Write protection must be disabled not only to erase and write contents
* but also in order to read ID, size, status etc.
* None of the operations (except for BSP_flashWriteEnable()) are possible
* on a write-protected device.
*
* 'bank': flash bank # (usually 0)
* RETURNS: 0 on success, nonzero on error (printing message to stderr).
*
* NOTES: - some boards (MVME5500) don't support 'bank' granularity but
* enable/disable write protection for all devices at once.
* - a jumper-based protection mechanism might be in place
* in addition to the software-based one. Consult the user's
* manual of your board for more information.
*/
int
BSP_flashWriteEnable(int bank);
/* Engage flash write protection (see above)
*/
int
BSP_flashWriteDisable(int bank);
/* Erase a region of flash memory.
* 'bank': flash bank # (usually 0).
* 'offset': destination address offset (from start of bank).
* 'size': number of bytes to erase.
* 'quiet': if non-zero, suppress confirmation message / prompt
* if > 1 also suppress the progress indicator.
*
* RETURNS: 0 on success, nonzero on error (printing messages to stderr).
*
* NOTES: - 'offset' and 'size' must be block-aligned. Common 16-bit devices
* have a block size of 0x20000 bytes. If two such devices are
* operated in parallel to form a 32-bit word then the 'effective'
* block size is 0x40000 bytes. The block size can be queried by
* BSP_flashBlockSize(int bank);
*
* - erase operation is verified.
*/
int
BSP_flashErase(int bank, uint32_t offset, uint32_t size, int quiet);
/* Write data from a buffer to flash. The target area is erased if necessary.
*
* 'bank': flash bank # (usually 0).
* 'offset': destination address offset (from start of bank).
* 'src': data source block address (in memory).
*'n_bytes': number of bytes to copy.
* 'quiet': if non-zero, suppress confirmation message / prompt
* if > 1 also suppress the progress indicator.
*
* NOTES: - Erase operations are only performed where necessary. I.e.,
* if one or both of the boundaries of the destination region is/are
* not block-aligned then adjacent data are preserved provided that
* the relevant chunks of the destination are blank (erased).
*
* | <neighbour> fffffff |
* ^--- destination ----- ^
* | : block boundary
* f : blank/erased pieces
*
* (If the start of the destination region up to the next block boundary
* is blank then '<neighbour>'-data is preserved. The end of the
* destination is treated the same way.)
*
* - user confirmation is requested before changes are made
*
* - 'src' must not point into the destination bank (no copy
* within a flash bank).
*
* - erase and write operations are verified.
*
* RETURNS: 0 on success, nonzero on error (message printed to stderr).
*/
int
BSP_flashWrite(int bank, uint32_t offset, char *src, uint32_t n_bytes, int quiet);
/* Copy contents of a file to flash.
*
* 'fname': Path of a file.
* 'quiet': if non-zero, suppress confirmation message / prompt
* if > 1 also suppress the progress indicator.
*
* NOTES: Convenience wrapper around BSP_flashWrite(); see above for
* args and return value.
*/
int
BSP_flashWriteFile(int bank, uint32_t offset, char *path, int quiet);
/* Dump info about available flash to file
* (stdout is used if f==NULL).
*
* RETURNS: 0
* NOTES: Write protection must be disengaged (see above);
*/
int
BSP_flashDumpInfo(FILE *f);
/*
* Obtain starting-address of flash bank (as seen from CPU)
* (returns ((uint32_t) -1) if the bank argument is invalid).
*/
uint32_t
BSP_flashStart(int bank);
/*
* Obtain size of flash bank (returns ((uint32_t) -1) if the
* bank argument is invalid).
*/
uint32_t
BSP_flashSize(int bank);
/*
* Obtain block size of flash bank (sector size times
* number of devices in parallel; the block size determines
* alignment and granularity accepted by BSP_flashErase()
* (returns ((uint32_t) -1) if the bank argument is invalid).
*/
uint32_t
BSP_flashBlockSize(int bank);
#ifdef __cplusplus
}
#endif
/*
* Authorship
* ----------
* This software was created by
* Till Straumann <strauman@slac.stanford.edu>, 2005-2007,
* Stanford Linear Accelerator Center, Stanford University.
*
* Acknowledgement of sponsorship
* ------------------------------
* The software was produced by
* the Stanford Linear Accelerator Center, Stanford University,
* under Contract DE-AC03-76SFO0515 with the Department of Energy.
*
* Government disclaimer of liability
* ----------------------------------
* Neither the United States nor the United States Department of Energy,
* nor any of their employees, makes any warranty, express or implied, or
* assumes any legal liability or responsibility for the accuracy,
* completeness, or usefulness of any data, apparatus, product, or process
* disclosed, or represents that its use would not infringe privately owned
* rights.
*
* Stanford disclaimer of liability
* --------------------------------
* Stanford University makes no representations or warranties, express or
* implied, nor assumes any liability for the use of this software.
*
* Stanford disclaimer of copyright
* --------------------------------
* Stanford University, owner of the copyright, hereby disclaims its
* copyright and all other rights in this software. Hence, anyone may
* freely use it for any purpose without restriction.
*
* Maintenance of notices
* ----------------------
* In the interest of clarity regarding the origin and status of this
* SLAC software, this and all the preceding Stanford University notices
* are to remain affixed to any copy or derivative of this software made
* or distributed by the recipient and are to be affixed to any copy of
* software made or distributed by the recipient that contains a copy or
* derivative of this software.
*
* ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03
*/
#endif