path: root/c/src/lib/libbsp/powerpc/psim/tools/psim-shared

TREE_FILE=psim_tree.${LOGNAME}

case $0 in
  *4.8*)  rtemsTarget=powerpc-rtems4.8 ;;
  *4.9*)  rtemsTarget=powerpc-rtems4.9 ;;
  *4.10*) rtemsTarget=powerpc-rtems4.10 ;;
  *) ;;
esac

### Generate the PSIM device tree based upon the type of application being run
gen_device_tree()
{
  enable_sysv_ipc="yes"

  if [ ${use_sysv_ipc} = "yes" ] ; then
    enable_sysv_ipc="yes"
    value=-1               # for now assume we are slave in this mode
  else
    case ${1} in 
      *node*)
        enable_sysv_devices="yes"
        case ${1} in
          *node1*) value=1 ;;
          *)       value=-1 ;;
        esac
        ;;
      *)
        enable_sysv_devices="no"
        ;;
    esac
  fi

  if [ ${enable_sysv_devices} = "yes" ] ; then
    if [ X${RTEMS_SHM_SEMAPHORE_KEY} = X -o X${RTEMS_SHM_KEY} = X ] ; then
      fatal  RTEMS_SHM_SEMAPHORE_KEY and/or RTEMS_SHM_KEY not set
    fi
  fi

  if [ X${RAM_SIZE} = X ] ; then
    if [ X${NM} = X ] ; then
      NM=${rtemsTarget}-nm
    fi
    RAM_SIZE=`$NM ${1} | awk '/\<RamSize\>/{print "0x"$1}'`
  fi

  cat <<EOF
#
#  Device Tree for PSIM
#
#  Automatically Generated -- DO NOT EDIT!!
#
/#address-cells 1
/openprom/init/register/pvr 0xfffe0000
# This must be >= than linkcmds defined RamSize!
/openprom/options/oea-memory-size $RAM_SIZE
##### EEPROM @ 0x0c000000 for 512K
/eeprom@0x0c000000/reg 0x0c000000 0x80000
/eeprom@0x0c000000/nr-sectors 8
/eeprom@0x0c000000/sector-size 0x10000
/eeprom@0x0c000000/byte-write-delay 1000
/eeprom@0x0c000000/sector-start-delay 100
/eeprom@0x0c000000/erase-delay 1000
/eeprom@0x0c000000/manufacture-code 0x01
/eeprom@0x0c000000/device-code 0xa4

##### NVRAM/RTC NVRAM Portion is 0x0c080000 for 512K
##### NVRAM/RTC RTC   Portion is 0x0c100000 for 12
/nvram@0x0c080000/reg 0x0c080000 524300
/nvram@0x0c080000/timezone -3600

##### OPENPIC @ 0x0c130000 - 0x0c170000 (512K)
/opic@0x0c130000/reg              0x0c130000 0 0x0c130000 0x40000
/opic@0x0c130000/interrupt-ranges 0 0 0 16
/opic@0x0c130000/device_type      open-pic
# interupt out -> CPU's interrupt pin
/opic@0x0c130000 > intr0 int /cpus/cpu@0
EOF

  if [ X${enable_if_sim} = Xyes ] ; then
    cat <<EOF

#### ETHTAP @ 0x0c100020 for 0x40
#
# NOTE 'ethtap' currently (200902) requires psim to
#      be patched -- also, it is only supported on
#      a linux host.
#      the 'ethtap' device transfers data from/to the
#      simulated network interface to/from a 'ethertap'
#      interface on the linux host (consult tun/tap
#      device documentation).
#      A very useful tool is 'tunctl' which allows for
#      configuring user-accessible, persistent 'tap'
#      devices so that psim may be executed w/o special
#      (root) privileges.

/ethtap@0x0c100020/reg           0x0c100020 0x40
# route interrupt to open-pic
/ethtap@0x0c100020               > 0 irq0 /opic@0x0c130000
# 'tun' device on host
/ethtap@0x0c100020/tun-device    "/dev/net/tun"
# name of 'tap' device to use
/ethtap@0x0c100020/tap-ifname    "tap0"
# ethernet address of simulated IF
/ethtap@0x0c100020/hw-address    "00:00:00:22:11:00"
# generate CRC and append to received packet before
# handing over to the simulation. This is mostly for
# debugging the rtems device driver. If unsure, leave 'false'.
/ethtap@0x0c100020/enable-crc    false
EOF
  fi

  if [ ${enable_sysv_devices} = yes ] ; then
    echo "##### System V IPC (Semaphore) 0x0c100010 for 12"
    echo "/sem@0x0c100010/reg 0x0c100010 12"
    echo "/sem@0x0c100010/key ${RTEMS_SHM_SEMAPHORE_KEY}"
    echo "/sem@0x0c100010/value ${value}"
    echo
    echo "##### System V IPC (Shared Memory) 0x0c110000 for 128K"
    echo "/shm@0x0c110000/reg 0x0c110000 0x20000"
    echo "/shm@0x0c110000/key ${RTEMS_SHM_KEY}"
  fi
}

### run the specified test with the time limit
runone()
{
  testname=${1}
  max_run_time=${2}
  if [ $# -eq 3 ] ; then
    treefile=${3}
  else
    treefile=${TREE_FILE}
  fi
  if [ ${max_run_time} -eq 0 ] ; then
    #echo run ${testname} forever
    ${RUN} -f ${treefile} ${RUN_DEBUG} ${testname}
  else
    log=`echo ${testname} | sed -e 's/.exe$/.log/' -e 's/.ralf$/.log/'`
    #echo run ${testname} for maximum ${max_run_time} seconds
    ${RUN} -f ${treefile} ${RUN_DEBUG} ${testname} >${log} 2>&1 &
    pid=$!

    # Make sure it won't run forever...
    time_run=0
    while [ $time_run -lt $max_run_time ]
    do
      # sleep 1s at a time waiting for job to finish or timer to expire
      # if job has exited, then we exit, too.
      sleep 1
      kill -0 $pid 2> /dev/null
      running=$?
      if [ $running -eq 0 ] ; then
        time_run=$((time_run + 5))
        if [ $time_run -ge $max_run_time ]; then
	  kill -9 $pid 2> /dev/null
	  ran_too_long="yes"
          echo "${testname} killed after running ${max_run_time} seconds"
        fi
        grep "Suspending faulting task" ${log} >/dev/null 2>&1
        Fault=$?
        grep "assertion failed" ${log} >/dev/null 2>&1
        Assert=$?
        if [ $Fault -eq 0 -o $Assert -eq 0 ] ; then
	  kill -9 $pid 2> /dev/null
          echo "${testname} failed after ${max_run_time} seconds"
          ran_too_long="no"
          break
        fi
      else
        ran_too_long="no"
        break
      fi
    done
    cat ${log}
    rm -f ${log}
  fi

}