/*
* This set of routines starts the application. It includes application,
* board, and monitor specific initialization and configuration.
* The generic CPU dependent initialization has been performed
* before any of these are invoked.
*
* COPYRIGHT (c) 1989-2008.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.com/license/LICENSE.
*
* $Id$
*/
#include <string.h>
#include <fcntl.h>
#include <bsp.h>
#include <bsp/irq.h>
#include <bsp/bootcard.h>
#include <rtems/bspIo.h>
#include <rtems/powerpc/powerpc.h>
#include <libcpu/cpuIdent.h>
#include <libcpu/bat.h>
#include <libcpu/spr.h>
SPR_RW(SPRG1)
/* On psim, each click of the decrementer register corresponds
* to 1 instruction. By setting this to 100, we are indicating
* that we are assuming it can execute 100 instructions per
* microsecond. This corresponds to sustaining 1 instruction
* per cycle at 100 Mhz. Whether this is a good guess or not
* is anyone's guess.
*/
extern int PSIM_INSTRUCTIONS_PER_MICROSECOND;
/*
* PCI Bus Frequency
*/
unsigned int BSP_bus_frequency;
/*
* Driver configuration parameters
*/
uint32_t bsp_clicks_per_usec;
/*
* Memory on this board.
*/
extern char RamSize[];
uint32_t BSP_mem_size;
/*
* Time base divisior (how many tick for 1 second).
*/
unsigned int BSP_time_base_divisor;
void BSP_panic(char *s)
{
printk("%s PANIC %s\n",_RTEMS_version, s);
__asm__ __volatile ("sc");
}
void _BSP_Fatal_error(unsigned int v)
{
printk("%s PANIC ERROR %x\n",_RTEMS_version, v);
__asm__ __volatile ("sc");
}
/*
* bsp_start
*
* This routine does the bulk of the system initialization.
*/
void bsp_start( void )
{
extern unsigned long __rtems_end[];
uint32_t intrStackStart;
uint32_t intrStackSize;
/*
* Note we can not get CPU identification dynamically, so
* force current_ppc_cpu.
*/
current_ppc_cpu = PPC_PSIM;
/*
* initialize the device driver parameters
*/
BSP_bus_frequency = (unsigned int)&PSIM_INSTRUCTIONS_PER_MICROSECOND;
bsp_clicks_per_usec = BSP_bus_frequency;
BSP_time_base_divisor = 1;
/*
* The simulator likes the exception table to be at 0xfff00000.
*/
bsp_exceptions_in_RAM = FALSE;
/*
* Initialize the interrupt related settings.
*/
intrStackStart = (uint32_t) __rtems_end;
intrStackSize = rtems_configuration_get_interrupt_stack_size();
BSP_mem_size = RamSize;
/*
* Initialize default raw exception handlers.
*/
ppc_exc_initialize(
PPC_INTERRUPT_DISABLE_MASK_DEFAULT,
intrStackStart,
intrStackSize
);
/*
* Initalize RTEMS IRQ system
*/
BSP_rtems_irq_mng_init(0);
/*
* Setup BATs and enable MMU
*/
/* Memory */
setdbat(0, 0x0<<24, 0x0<<24, 1<<24, _PAGE_RW);
setibat(0, 0x0<<24, 0x0<<24, 1<<24, 0);
/* PCI */
setdbat(1, 0x8<<24, 0x8<<24, 1<<24, IO_PAGE);
setdbat(2, 0xc<<24, 0xc<<24, 1<<24, IO_PAGE);
_write_MSR(_read_MSR() | MSR_DR | MSR_IR);
asm volatile("sync; isync");
}
