blob: 2c799557d9668c0d84dbe0112149c37567d446ff (
plain) (
tree)
|
|
/*
* bsp.h -- contain BSP API definition.
*
* Copyright (C) 1999 Eric Valette. valette@crf.canon.fr
*
* The license and distribution terms for this file may be
* found in found in the file LICENSE in this distribution or at
* http://www.rtems.com/license/LICENSE.
*
* S. Kate Feng 12/03 : Modified it to support the MVME5500 board.
*
*/
#ifndef LIBBSP_POWERPC_MVME5500_BSP_H
#define LIBBSP_POWERPC_MVME5500_BSP_H
#include <bspopts.h>
#include <rtems.h>
#include <rtems/console.h>
#include <rtems/clockdrv.h>
#include <libcpu/io.h>
#include <bsp/vectors.h>
#include <bsp/bspMvme5500.h>
/* fundamental addresses for this BSP (PREPxxx are from libcpu/io.h) */
#define _IO_BASE GT64260_REG_BASE
/* PCI0 Domain I/O space */
#define PCI0_IO_BASE 0xf0000000
#define PCI1_IO_BASE 0xf0800000
/* PCI 0 memory space as seen from the CPU */
#define PCI0_MEM_BASE 0x80000000
#define PCI_MEM_BASE 0 /* glue for vmeUniverse */
#define PCI_MEM_BASE_ADJUSTMENT 0
/* address of our ram on the PCI bus */
#define PCI_DRAM_OFFSET 0
/* PCI 1 memory space as seen from the CPU */
#define PCI1_MEM_BASE 0xe0000000
#define PCI1_MEM_SIZE 0x10000000
/* Needed for hot adding via PMCspan on the PCI0 local bus.
* This is board dependent, only because mvme5500
* supports hot adding and has more than one local PCI
* bus.
*/
#define BSP_MAX_PCI_BUS_ON_PCI0 8
#define BSP_MAX_PCI_BUS_ON_PCI1 2
#define BSP_MAX_PCI_BUS (BSP_MAX_PCI_BUS_ON_PCI0+BSP_MAX_PCI_BUS_ON_PCI1)
/* The glues to Till's vmeUniverse, although the name does not
* actually reflect the relevant architect of the MVME5500.
* Till TODO ? : BSP_PCI_DO_EOI instead ?
* BSP_EXT_IRQ0 instead of BSP_PCI_IRQ0 ?
*
*/
#define BSP_PIC_DO_EOI inl(0xc34) /* PCI IACK */
#define BSP_PCI_IRQ0 BSP_GPP_IRQ_LOWEST_OFFSET
/*
* confdefs.h overrides for this BSP:
* - termios serial ports (defaults to 1)
* - Interrupt stack space is not minimum if defined.
*/
#define CONFIGURE_NUMBER_OF_TERMIOS_PORTS 2
#define CONFIGURE_INTERRUPT_STACK_MEMORY (16 * 1024)
/* uart.c uses out_8 instead of outb */
#define BSP_UART_IOBASE_COM1 GT64260_DEV1_BASE + 0x20000
#define BSP_UART_IOBASE_COM2 GT64260_DEV1_BASE + 0x21000
#define BSP_CONSOLE_PORT BSP_UART_COM1 /* console */
#define BSP_UART_BAUD_BASE 115200
/*
* Vital Board data Start using DATA RESIDUAL
*/
/*
* Total memory using RESIDUAL DATA
*/
extern unsigned int BSP_mem_size;
/*
* PCI Bus Frequency
*/
extern unsigned int BSP_bus_frequency;
/*
* processor clock frequency
*/
extern unsigned int BSP_processor_frequency;
/*
* Time base divisior (how many tick for 1 second).
*/
extern unsigned int BSP_time_base_divisor;
#define BSP_Convert_decrementer( _value ) \
((unsigned long long) ((((unsigned long long)BSP_time_base_divisor) * 1000000ULL) /((unsigned long long) BSP_bus_frequency)) * ((unsigned long long) (_value)))
extern rtems_configuration_table BSP_Configuration;
extern void BSP_panic(char *s);
extern void rtemsReboot(void);
/* extern int printk(const char *, ...) __attribute__((format(printf, 1, 2))); */
extern int BSP_disconnect_clock_handler (void);
extern int BSP_connect_clock_handler (void);
extern unsigned long _BSP_clear_hostbridge_errors();
#define RTEMS_BSP_NETWORK_DRIVER_NAME "gt1"
#define RTEMS_BSP_NETWORK_DRIVER_ATTACH rtems_GT64260eth_driver_attach
extern int
RTEMS_BSP_NETWORK_DRIVER_ATTACH(/* struct rtems_bsdnet_ifconfig * */);
#endif
|