blob: 81f70735d3be5c11a5c953a28b90aa13db14ace9 (
plain) (
tree)
|
|
/*===============================================================*\
| Project: RTEMS support for MPC83xx |
+-----------------------------------------------------------------+
| Copyright (c) 2007 |
| Embedded Brains GmbH |
| Obere Lagerstr. 30 |
| D-82178 Puchheim |
| Germany |
| rtems@embedded-brains.de |
+-----------------------------------------------------------------+
| The license and distribution terms for this file may be |
| found in the file LICENSE in this distribution or at |
| |
| http://www.rtems.com/license/LICENSE. |
| |
+-----------------------------------------------------------------+
| this file contains the board specific portion |
| of the network interface driver |
\*===============================================================*/
#include <rtems.h>
#include <rtems/rtems_bsdnet.h>
#include <rtems/rtems_bsdnet_internal.h>
#include <bsp.h>
#include <bsp/tsec.h>
#include <bsp/u-boot.h>
#include <mpc83xx/mpc83xx.h>
#include <string.h>
#include <libcpu/spr.h>
#if MPC83XX_CHIP_TYPE / 10 != 830
#define TSEC_IFMODE_RGMII 0
#define TSEC_IFMODE_GMII 1
#if defined( MPC83XX_BOARD_MPC8313ERDB)
#define TSEC_IFMODE TSEC_IFMODE_RGMII
#elif defined( MPC83XX_BOARD_MPC8349EAMDS)
#define TSEC_IFMODE TSEC_IFMODE_GMII
#elif defined( MPC83XX_BOARD_HSC_CM01)
#define TSEC_IFMODE TSEC_IFMODE_RGMII
#else
#warning No TSEC configuration available
#endif
/* System Version Register */
#define SVR 286
SPR_RO( SVR)
/* Processor Version Register */
SPR_RO( PPC_PVR)
/*=========================================================================*\
| Function: |
\*-------------------------------------------------------------------------*/
int BSP_tsec_attach
(
/*-------------------------------------------------------------------------*\
| Purpose: |
| attach or detach the driver |
+---------------------------------------------------------------------------+
| Input Parameters: |
\*-------------------------------------------------------------------------*/
struct rtems_bsdnet_ifconfig *config, /* interface configuration */
int attaching /* 0 = detach, else attach */
)
/*-------------------------------------------------------------------------*\
| Return Value: |
| 1, if success |
\*=========================================================================*/
{
tsec_config tsec_cfg;
int unitNumber;
char *unitName;
uint32_t svr = _read_SVR();
uint32_t pvr = _read_PPC_PVR();
memset(&tsec_cfg, 0, sizeof(tsec_cfg));
config->drv_ctrl = &tsec_cfg;
/*
* Parse driver name
*/
if((unitNumber = rtems_bsdnet_parse_driver_name(config, &unitName)) < 0) {
return 0;
}
tsec_cfg.reg_ptr = &mpc83xx.tsec [unitNumber - 1];
tsec_cfg.mdio_ptr = &mpc83xx.tsec [0];
if (attaching) {
#if (TSEC_IFMODE==TSEC_IFMODE_GMII)
#if !defined(MPC83XX_BOARD_HSC_CM01)
/*
* do not change system I/O configuration registers on HSC board
* because should initialize from RCW
*/
if (unitNumber == 1) {
/*
* init system I/O configuration registers
* to ensure proper pin functions
*/
mpc83xx.syscon.sicrh = mpc83xx.syscon.sicrh & ~0x1F800000;
/*
* init port registers (GPIO2DIR) for TSEC1
*/
mpc83xx.gpio[1].gpdir = ((mpc83xx.gpio[1].gpdir & ~0x00000FFF)
| 0x0000001f);
}
if (unitNumber == 2) {
/*
* init system I/O configuration registers
* to ensure proper pin functions
*/
mpc83xx.syscon.sicrh = mpc83xx.syscon.sicrh & ~0x007f8000;
/*
* init port registers (GPIO2DIR) for TSEC2
*/
mpc83xx.gpio[0].gpdir = ((mpc83xx.gpio[0].gpdir & ~0x000FFFFF)
| 0x00087881);
}
#endif /* !defined(MPC83XX_BOARD_HSC_CM01) */
#endif
#if (TSEC_IFMODE==TSEC_IFMODE_RGMII)
/*
* Nothing special needed for TSEC1 operation
*/
#endif
}
/*
* add MAC address into config->hardware_adderss
* FIXME: get the real address we need
*/
if (config->hardware_address == NULL) {
#if !defined(HAS_UBOOT)
static char hw_addr [TSEC_COUNT][6];
volatile tsec_registers *reg_ptr = tsec_cfg.reg_ptr;
/* read MAC address from hardware register */
/* we expect it htere from the boot loader */
config->hardware_address = hw_addr[unitNumber-1];
hw_addr[unitNumber-1][5] = (reg_ptr->macstnaddr[0] >> 24) & 0xff;
hw_addr[unitNumber-1][4] = (reg_ptr->macstnaddr[0] >> 16) & 0xff;
hw_addr[unitNumber-1][3] = (reg_ptr->macstnaddr[0] >> 8) & 0xff;
hw_addr[unitNumber-1][2] = (reg_ptr->macstnaddr[0] >> 0) & 0xff;
hw_addr[unitNumber-1][1] = (reg_ptr->macstnaddr[1] >> 24) & 0xff;
hw_addr[unitNumber-1][0] = (reg_ptr->macstnaddr[1] >> 16) & 0xff;
#endif
#if defined(HAS_UBOOT)
switch (unitNumber) {
case 1:
config->hardware_address = bsp_uboot_board_info.bi_enetaddr;
break;
#ifdef CONFIG_HAS_ETH1
case 2:
config->hardware_address = bsp_uboot_board_info.bi_enet1addr;
break;
#endif /* CONFIG_HAS_ETH1 */
#ifdef CONFIG_HAS_ETH2
case 3:
config->hardware_address = bsp_uboot_board_info.bi_enet2addr;
break;
#endif /* CONFIG_HAS_ETH2 */
#ifdef CONFIG_HAS_ETH3
case 4:
config->hardware_address = bsp_uboot_board_info.bi_enet3addr;
break;
#endif /* CONFIG_HAS_ETH3 */
default:
return 0;
}
#endif /* HAS_UBOOT */
}
/*
* set interrupt number for given interface
*/
config->irno = (unsigned) (
unitNumber == 1
? BSP_IPIC_IRQ_TSEC1_TX
: BSP_IPIC_IRQ_TSEC2_TX
);
if (svr == 0x80b00010 && pvr == 0x80850010) {
/*
* This is a special case for MPC8313ERDB with silicon revision 1. Look in
* "MPC8313ECE Rev. 3, 3/2008" errata for "IPIC 1".
*/
if (unitNumber == 1) {
tsec_cfg.irq_num_tx = 37;
tsec_cfg.irq_num_rx = 36;
tsec_cfg.irq_num_err = 35;
} else if (unitNumber == 2) {
tsec_cfg.irq_num_tx = 34;
tsec_cfg.irq_num_rx = 33;
tsec_cfg.irq_num_err = 32;
} else {
return 0;
}
} else {
rtems_irq_number irno = unitNumber == 1 ?
BSP_IPIC_IRQ_TSEC1_TX : BSP_IPIC_IRQ_TSEC2_TX;
/* get base interrupt number (for Tx irq, Rx=base+1,Err=base+2) */
tsec_cfg.irq_num_tx = irno + 0;
tsec_cfg.irq_num_rx = irno + 1;
tsec_cfg.irq_num_err = irno + 2;
}
/*
* XXX: Although most hardware builders will assign the PHY addresses
* like this, this should be more configurable
*/
#ifdef MPC83XX_BOARD_MPC8313ERDB
if (unitNumber == 2) {
tsec_cfg.phy_default = 4;
} else {
/* TODO */
return 0;
}
#else /* MPC83XX_BOARD_MPC8313ERDB */
tsec_cfg.phy_default = unitNumber-1;
#endif /* MPC83XX_BOARD_MPC8313ERDB */
tsec_cfg.unit_number = unitNumber;
tsec_cfg.unit_name = unitName;
/*
* call attach function of board independent driver
*/
return tsec_driver_attach_detach(config, attaching);
}
#endif /* MPC83XX_CHIP_TYPE / 10 != 830 */
|
