blob: 2c3b08212bf154861961fdbcbccac777397abbd3 (
plain) (
tree)
|
|
#
# README
#
BSP NAME: gen5200
BOARD: various boards based on MPC5200 Controller:
MicroSys PM520 with Carrier board CR825
BUS: N/A
CPU FAMILY: ppc
CPU: PowerPC MPC5200
COPROCESSORS: Hardware FPU
MODE: 32 bit mode, I and D cache enabled
DEBUG MONITOR: None
PERIPHERALS
===========
TIMERS: GPT
SERIAL PORTS: 3 PSCs
2 CAN IFs
1 I2C IF
REAL-TIME CLOCK: PCF8563
DMA: for Ethernet and CompactFlash
VIDEO: none
SCSI: none
IDE: 1 CompactFlash Slot supported
NETWORKING: 1 FEC Fast Ethernet
DRIVER INFORMATION
==================
CLOCK DRIVER: using one GPT
IOSUPP DRIVER: none
SHMSUPP: none
TIMER DRIVER: Timebase register (lower 32 bits only)
STDIO
=====
PORT: PSC1
ELECTRICAL: RS-232
BAUD: 9600
BITS PER CHARACTER: 8
PARITY: None
STOP BITS: 1
NOTES
=====
On-chip resources:
PSC1 /dev/console /dev/tty00
PSC2 /dev/tty01
PSC3 /dev/tty02
Board description
-----------------
Clock rate: external clock: 33MHz
Bus width: 32 bit Flash, 32 bit SDRAM
FLASH: 8MByte
RAM: 64MByte SDRAM
Debugging/ Code loading:
------------------------
Tested using the Lauterbach TRACE32 ICD debugger.
|