blob: a99fc1cec50c6fe18fe6cf1b03a9a2b63bd4fc21 (
plain) (
tree)
|
|
/* irq_init.c
*
* This file contains the implementation of rtems initialization
* related to interrupt handling.
*
* CopyRight (C) 1999 valette@crf.canon.fr
*
* Enhanced by Jay Kulpinski <jskulpin@eng01.gdds.com>
* to make it valid for MVME2300 Motorola boards.
*
* Modified by T. Straumann for the 'beatnik' BSP.
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.org/license/LICENSE.
*/
#include <rtems.h>
#include <bsp.h>
#include <bsp/irq.h>
#include <bsp/vectors.h>
#include <rtems/bspIo.h>
#if 0
#include <libcpu/io.h>
#include <libcpu/spr.h>
#include <bsp/pci.h>
#include <bsp/residual.h>
#include <bsp/openpic.h>
#include <bsp/irq.h>
#include <bsp.h>
#include <bsp/motorola.h>
#endif
/*
#define SHOW_ISA_PCI_BRIDGE_SETTINGS
*/
extern unsigned int external_exception_vector_prolog_code_size[];
extern void external_exception_vector_prolog_code(void);
extern unsigned int decrementer_exception_vector_prolog_code_size[];
extern void decrementer_exception_vector_prolog_code(void);
/*
* default handler
*/
static void nop_func(void *arg){}
static rtems_irq_connect_data rtemsIrq[BSP_IRQ_NUMBER];
static rtems_irq_global_settings initial_config;
static rtems_irq_prio rtemsPrioTbl[BSP_IRQ_NUMBER];
static rtems_irq_connect_data defaultIrq = {
name: 0,
hdl: nop_func,
handle: 0,
on: 0,
off: 0,
isOn: 0
};
/*
* This code assumes the exceptions management setup has already
* been done. We just need to replace the exceptions that will
* be handled like interrupt. On mcp750/mpc750 and many PPC processors
* this means the decrementer exception and the external exception.
*/
void BSP_rtems_irq_mng_init(unsigned cpuId)
{
int i;
/*
* First initialize the Interrupt management hardware
*/
/*
* Initialize Rtems management interrupt table
*/
/*
* re-init the rtemsIrq table
*/
for (i = BSP_LOWEST_OFFSET; i <= BSP_MAX_OFFSET; i++) {
rtemsIrq[i] = defaultIrq;
rtemsIrq[i].name = i;
rtemsPrioTbl[i] = BSP_IRQ_DEFAULT_PRIORITY;
}
/*
* Init initial Interrupt management config
*/
initial_config.irqNb = BSP_IRQ_NUMBER;
initial_config.defaultEntry = defaultIrq;
initial_config.irqHdlTbl = rtemsIrq;
initial_config.irqBase = BSP_LOWEST_OFFSET;
initial_config.irqPrioTbl = rtemsPrioTbl;
if (!BSP_rtems_irq_mngt_set(&initial_config)) {
/*
* put something here that will show the failure...
*/
BSP_panic("Unable to initialize RTEMS interrupt Management!!! System locked\n");
}
#ifdef TRACE_IRQ_INIT
printk("RTEMS IRQ management is now operationnal\n");
#endif
}
|