/* ckinit.c
*
* This file provides a template for the clock device driver initialization.
*
* COPYRIGHT (c) 1989-1999.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.OARcorp.com/rtems/license.html.
*
* $Id$
*/
#include <stdlib.h>
#include <rtems.h>
#include <rtems/libio.h>
#include <bsp.h>
void Clock_exit( void );
rtems_isr Clock_isr( rtems_vector_number vector );
/*
* The interrupt vector number associated with the clock tick device
* driver.
*/
#define CLOCK_VECTOR 4
/*
* Clock_driver_ticks is a monotonically increasing counter of the
* number of clock ticks since the driver was initialized.
*/
volatile rtems_unsigned32 Clock_driver_ticks;
/*
* Clock_isrs is the number of clock ISRs until the next invocation of
* the RTEMS clock tick routine. The clock tick device driver
* gets an interrupt once a millisecond and counts down until the
* length of time between the user configured microseconds per tick
* has passed.
*/
rtems_unsigned32 Clock_isrs; /* ISRs until next tick */
/*
* These are set by clock driver during its init
*/
rtems_device_major_number rtems_clock_major = ~0;
rtems_device_minor_number rtems_clock_minor;
/*
* The previous ISR on this clock tick interrupt vector.
*/
rtems_isr_entry Old_ticker;
void Clock_exit( void );
/*
* Isr Handler
*/
rtems_isr Clock_isr(
rtems_vector_number vector
)
{
/*
* bump the number of clock driver ticks since initialization
*
* determine if it is time to announce the passing of tick as configured
* to RTEMS through the rtems_clock_tick directive
*
* perform any timer dependent tasks
*/
}
/*
* Install_clock
*
* Install a clock tick handler and reprograms the chip. This
* is used to initially establish the clock tick.
*/
void Install_clock(
rtems_isr_entry clock_isr
)
{
/*
* Initialize the clock tick device driver variables
*/
Clock_driver_ticks = 0;
Clock_isrs = BSP_Configuration.microseconds_per_tick / 1000;
Old_ticker = (rtems_isr_entry) set_vector( clock_isr, CLOCK_VECTOR, 1 );
/*
* Hardware specific initialize goes here
*/
/* XXX */
/*
* Schedule the clock cleanup routine to execute if the application exits.
*/
atexit( Clock_exit );
}
/*
* Clean up before the application exits
*/
void Clock_exit( void )
{
/* XXX: turn off the timer interrupts */
/* XXX: If necessary, restore the old vector */
}
/*
* Clock_initialize
*
* Device driver entry point for clock tick driver initialization.
*/
rtems_device_driver Clock_initialize(
rtems_device_major_number major,
rtems_device_minor_number minor,
void *pargp
)
{
Install_clock( Clock_isr );
/*
* make major/minor avail to others such as shared memory driver
*/
rtems_clock_major = major;
rtems_clock_minor = minor;
return RTEMS_SUCCESSFUL;
}
rtems_device_driver Clock_control(
rtems_device_major_number major,
rtems_device_minor_number minor,
void *pargp
)
{
rtems_unsigned32 isrlevel;
rtems_libio_ioctl_args_t *args = pargp;
if (args == 0)
goto done;
/*
* This is hokey, but until we get a defined interface
* to do this, it will just be this simple...
*/
if (args->command == rtems_build_name('I', 'S', 'R', ' '))
{
Clock_isr(CLOCK_VECTOR);
}
else if (args->command == rtems_build_name('N', 'E', 'W', ' '))
{
rtems_interrupt_disable( isrlevel );
(void) set_vector( args->buffer, CLOCK_VECTOR, 1 );
rtems_interrupt_enable( isrlevel );
}
done:
return RTEMS_SUCCESSFUL;
}