/**
* @file
*
* This file was copied from the powerpc and modified slightly.
* I think this file could be made generic and put in a general pci
* area.
*/
/*
* COPYRIGHT (c) 1989-2012.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.org/license/LICENSE.
*/
/* find a particular PCI device
* (we assume, the firmware configured the PCI bus[es] for us)
*/
/*
* Authorship
* ----------
* This software was created by
* Till Straumann <strauman@slac.stanford.edu>, 2001,
* Stanford Linear Accelerator Center, Stanford University.
*
* Acknowledgement of sponsorship
* ------------------------------
* This software was produced by
* the Stanford Linear Accelerator Center, Stanford University,
* under Contract DE-AC03-76SFO0515 with the Department of Energy.
*
* Government disclaimer of liability
* ----------------------------------
* Neither the United States nor the United States Department of Energy,
* nor any of their employees, makes any warranty, express or implied, or
* assumes any legal liability or responsibility for the accuracy,
* completeness, or usefulness of any data, apparatus, product, or process
* disclosed, or represents that its use would not infringe privately owned
* rights.
*
* Stanford disclaimer of liability
* --------------------------------
* Stanford University makes no representations or warranties, express or
* implied, nor assumes any liability for the use of this software.
*
* Stanford disclaimer of copyright
* --------------------------------
* Stanford University, owner of the copyright, hereby disclaims its
* copyright and all other rights in this software. Hence, anyone may
* freely use it for any purpose without restriction.
*
* Maintenance of notices
* ----------------------
* In the interest of clarity regarding the origin and status of this
* SLAC software, this and all the preceding Stanford University notices
* are to remain affixed to any copy or derivative of this software made
* or distributed by the recipient and are to be affixed to any copy of
* software made or distributed by the recipient that contains a copy or
* derivative of this software.
*
* ------------------ SLAC Software Notices, Set 4 OTT.002a, 2004 FEB 03
*/
#define PCI_DEBUG
#include <inttypes.h>
#include <bsp/pci.h>
#include <rtems/bspIo.h>
#include <stdio.h>
/* Stolen from i386... */
/*
* Make device signature from bus number, device number and function
* number
*/
#define PCIB_DEVSIG_MAKE(b,d,f) ((b<<8)|(d<<3)|(f))
/*
* Extract various parts from device signature
*/
#define PCIB_DEVSIG_BUS(x) (((x)>>8) &0xff)
#define PCIB_DEVSIG_DEV(x) (((x)>>3) & 0x1f)
#define PCIB_DEVSIG_FUNC(x) ((x) & 0x7)
typedef struct {
unsigned short vid,did;
int inst;
} fd_arg;
static int find_dev_cb(
int bus,
int dev,
int fun,
void *uarg
)
{
fd_arg *a = uarg;
unsigned short vendor;
unsigned short device;
pci_read_config_word(bus,dev,fun,PCI_VENDOR_ID,&vendor);
pci_read_config_word(bus,dev,fun,PCI_DEVICE_ID,&device);
printk(" FOUND: Vendor 0x%x Device: 0x%x\n", vendor, device);
if (a->vid == vendor) {
if (a->did == device && 0 == a->inst-- ) {
a->inst = PCIB_DEVSIG_MAKE( bus, dev, fun );
return 1;
}
}
return 0;
}
int pci_find_device(
unsigned short vendorid,
unsigned short deviceid,
int instance,
int *pbus,
int *pdev,
int *pfun
)
{
fd_arg a;
void *h;
a.vid = vendorid;
a.did = deviceid;
a.inst = instance;
if ( (h = BSP_pciScan(0, find_dev_cb, (void*)&a)) ) {
*pbus = PCIB_DEVSIG_BUS( a.inst );
*pdev = PCIB_DEVSIG_DEV( a.inst );
*pfun = PCIB_DEVSIG_FUNC( a.inst );
return 0;
}
return -1;
}
static int dump_dev_cb(
int bus,
int dev,
int fun,
void *uarg
)
{
uint16_t vi,di;
uint16_t cd,st;
uint32_t b1,b2;
uint8_t il,ip;
FILE *f = uarg;
pci_read_config_word (bus, dev, fun, PCI_VENDOR_ID, &vi);
pci_read_config_word (bus, dev, fun, PCI_DEVICE_ID, &di);
pci_read_config_word (bus, dev, fun, PCI_COMMAND, &cd);
pci_read_config_word (bus, dev, fun, PCI_STATUS, &st);
pci_read_config_dword(bus, dev, fun, PCI_BASE_ADDRESS_0, &b1);
pci_read_config_dword(bus, dev, fun, PCI_BASE_ADDRESS_1, &b2);
pci_read_config_byte (bus, dev, fun, PCI_INTERRUPT_LINE, &il);
pci_read_config_byte (bus, dev, fun, PCI_INTERRUPT_PIN, &ip);
fprintf(
f,
"%3d:0x%02x:%d 0x%04x-0x%04x: 0x%04x 0x%04x 0x%08" PRIx32
" 0x%08" PRIx32 " %d -> %3d (=0x%02x)\n",
bus,
dev,
fun,
vi,
di,
cd,
st,
b1,
b2,
ip,
il,
il
);
return 0;
}
void BSP_pciConfigDump(FILE *f)
{
if ( !f )
f = stdout;
fprintf(
f,
"BUS:SLOT:FUN VENDOR-DEV_ID: COMMAND STATUS BASE_ADDR0 BASE_ADDR1 "
"IRQ_PIN -> IRQ_LINE\n"
);
BSP_pciScan(0, dump_dev_cb, f);
}
BSP_PciScanHandle BSP_pciScan(
BSP_PciScanHandle handle,
BSP_PciScannerCb cb,
void *uarg
) {
uint32_t d;
unsigned char bus,dev,fun,hd;
bus = PCIB_DEVSIG_BUS( (unsigned long)handle );
dev = PCIB_DEVSIG_DEV( (unsigned long)handle );
fun = PCIB_DEVSIG_FUNC( (unsigned long)handle );
hd = fun > 0 ? PCI_MAX_FUNCTIONS : 1;
for (; bus<pci_bus_count(); bus++, dev=0) {
for (; dev<PCI_MAX_DEVICES; dev++, fun=0) {
for (; fun<hd; fun++) {
/*
* The last devfn id/slot is special; must skip it
*/
if (PCI_MAX_DEVICES-1==dev && PCI_MAX_FUNCTIONS-1 == fun)
break;
(void)pci_read_config_dword(bus,dev,0,PCI_VENDOR_ID,&d);
if (PCI_INVALID_VENDORDEVICEID == d)
continue;
#ifdef PCI_DEBUG
printk(
"BSP_pciScan: Read _config_dword bus %d "
"dev 0x%x value 0x%2x\n",
bus,
dev,
d
);
#endif
if ( 0 == fun ) {
pci_read_config_byte(bus,dev,0, PCI_HEADER_TYPE, &hd);
#ifdef PCI_DEBUG
printk(
"BSP_pciScan: Read _config_byte bus %d dev 0x%x "
"fun %d value 0x%2x\n",
bus,
dev,
fun,
d
);
#endif
hd = (hd & PCI_HEADER_TYPE_MULTI_FUNCTION ? PCI_MAX_FUNCTIONS : 1);
}
(void)pci_read_config_dword(bus,dev,fun,PCI_VENDOR_ID,&d);
if (PCI_INVALID_VENDORDEVICEID == d)
continue;
#ifdef PCI_DEBUG
printk("BSP_pciScan: found 0x%08x at %d/x%02x/%d\n",d,bus,dev,fun);
#endif
if ( cb(bus,dev,fun,uarg) > 0 ) {
if ( ++fun >= hd ) {
fun = 0;
if ( ++dev >= PCI_MAX_DEVICES ) {
dev = 0;
bus++;
}
}
#ifdef PCI_DEBUG
printk(
"BSP_pciScan: Going to Return: bus %d dev 0x%x fun %d\n",
bus,
dev,
fun
);
#endif
return (void*) PCIB_DEVSIG_MAKE(bus,dev,fun);
}
}
}
}
return 0;
}
