/**
* @file
*/
/*
* COPYRIGHT (c) 1989-2012.
* On-Line Applications Research Corporation (OAR).
*
* The license and distribution terms for this file may be
* found in the file LICENSE in this distribution or at
* http://www.rtems.com/license/LICENSE.
*/
/*
*
* PCI defines and function prototypes
* Copyright 1994, Drew Eckhardt
* Copyright 1997, 1998 Martin Mares <mj@atrey.karlin.mff.cuni.cz>
*
* For more information, please consult the following manuals (look at
* http://www.pcisig.com/ for how to get them):
*
* PCI BIOS Specification
* PCI Local Bus Specification
* PCI to PCI Bridge Specification
* PCI System Design Guide
*/
#ifndef BSP_PCI_H
#define BSP_PCI_H
#include <rtems/pci.h>
#include <bsp.h>
#include <stdio.h>
struct _pin_routes
{
int pin, int_name[4];
};
struct _int_map
{
int bus, slot, opts;
struct _pin_routes pin_route[5];
};
struct pcibridge
{
int bus;
int slot;
};
/* If there's a conflict between a name in the routing table and
* what's already set on the device, reprogram the device setting
* to reflect int_name[0] for the routing table entry
*/
#define PCI_FIXUP_OPT_OVERRIDE_NAME (1<<0)
void FixupPCI( const struct _int_map *, int (*swizzler)(int,int) );
/* FIXME: This probably belongs into rtems/pci.h */
extern unsigned char pci_bus_count();
/* FIXME: This also is generic and could go into rtems/pci.h */
/* Scan pci config space and run a user callback on each
* device present; the user callback may return 0 to
* continue the scan or a value > 0 to abort the scan.
* Return values < 0 are reserved and must not be used.
*
* RETURNS: a (opaque) handle pointing to the bus/slot/fn-triple
* just after where the scan was aborted by a callback
* returning 1 (see above) or NULL if all devices were
* scanned.
* The handle may be passed to this routine to resume the
* scan continuing with the device after the one causing the
* abort.
* Pass a NULL 'handle' argument to start scanning from
* the beginning (bus/slot/fn = 0/0/0).
*/
typedef void *BSP_PciScanHandle;
typedef int (*BSP_PciScannerCb)(int bus, int slot, int fun, void *uarg);
BSP_PciScanHandle
BSP_pciScan(BSP_PciScanHandle handle, BSP_PciScannerCb cb, void *uarg);
/* Dump basic config. space info to a file. The argument may
* be NULL in which case 'stdout' is used.
* NOTE: the C-library must be functional before you can use
* this routine.
*/
void BSP_pciConfigDump(FILE *fp);
int indirect_pci_read_config_byte(
unsigned char bus,
unsigned char slot,
unsigned char function,
unsigned char offset,
uint8_t *val
);
int indirect_pci_read_config_word(
unsigned char bus,
unsigned char slot,
unsigned char function,
unsigned char offset,
uint16_t *val
);
int indirect_pci_read_config_dword(
unsigned char bus,
unsigned char slot,
unsigned char function,
unsigned char offset,
uint32_t *val
);
int indirect_pci_write_config_byte(
unsigned char bus,
unsigned char slot,
unsigned char function,
unsigned char offset,
uint8_t val
);
int indirect_pci_write_config_word(
unsigned char bus,
unsigned char slot,
unsigned char function,
unsigned char offset,
uint16_t val
);
int indirect_pci_write_config_dword(
unsigned char bus,
unsigned char slot,
unsigned char function,
unsigned char offset,
uint32_t val
);
/* Can these be moved to the rtems pci.h? */
int FindPCIbridge( int mybus, struct pcibridge *pb );
void pci_list_devices( void );
const pci_config_access_functions pci_indirect_functions;
void pci_out_le32( uint32_t base, uint32_t addr, uint32_t val);
void pci_out_32( uint32_t base, uint32_t addr, uint32_t val);
uint8_t pci_in_8 ( uint32_t base, uint32_t addr );
int16_t pci_in_le16 ( uint32_t base, uint32_t addr );
uint32_t pci_in_le32 ( uint32_t base, uint32_t addr );
int16_t pci_in_16 ( uint32_t base, uint32_t addr );
uint32_t pci_in_32 ( uint32_t base, uint32_t addr );
void pci_out_8 ( uint32_t base, uint32_t addr, uint8_t val );
void pci_out_le16( uint32_t base, uint32_t addr, uint16_t val );
void pci_out_16( uint32_t base, uint32_t addr, uint16_t val );
void pci_out_32 ( uint32_t base, uint32_t addr, uint32_t val);
#define out_32(_addr, _val) pci_out_32(BSP_PCI_BASE_ADDRESS, _addr, _val)
#define out_le32(_addr, _val) pci_out_le32(BSP_PCI_BASE_ADDRESS, _addr, _val)
#define out_32(_addr, _val) pci_out_32(BSP_PCI_BASE_ADDRESS, _addr, _val)
#define in_8(_addr) pci_in_8( BSP_PCI_BASE_ADDRESS, _addr )
#define in_le16(_addr) pci_in_le16( BSP_PCI_BASE_ADDRESS, _addr )
#define in_le32(_addr) pci_in_le32( BSP_PCI_BASE_ADDRESS, _addr )
#define in_16(_addr) pci_in_16( BSP_PCI_BASE_ADDRESS, _addr )
#define in_32(_addr) pci_in_32( BSP_PCI_BASE_ADDRESS, _addr )
#define out_8(_addr,_val) pci_out_8( BSP_PCI_BASE_ADDRESS, _addr, _val )
#define out_le16(_addr,_val) pci_out_le16( BSP_PCI_BASE_ADDRESS, _addr, _val )
#define out_16(_addr,_val) pci_out_16( BSP_PCI_BASE_ADDRESS, _addr, _val )
#endif /* BSP_PCI_H */
