blob: 446d6af50e25a5d0769653c195b5bff329ac5cea (
plain) (
tree)
|
|
#
# $Id$
#
Simple BSP for the TX3904 simulator built into gdb.
Simulator Invocation
====================
The following is how the simulator is invoked.
target sim --board=jmr3904
GDB must be configured with a target like "tx39-rtems". Otherwise,
the simulator will not be built for the correct instruction
and peripheral set.
Simulator Information
=====================
The simulated system clock counts instructions. Setting the clock
source to "clock" and the divider to 1 results in the timer directly
counting the number of instructions executed.
Status
======
+ hello.exe locks up while running the global destructors. This almost
has to be a linkcmds issue.
+ Workaround: bspclean.c actually explicits invokes _sys_exit() BEFORE
letting the global destructors run.
+ There is a clock tick device driver which has not been calibrated.
+ There is no timer device driver.
|